NAME
fence_vixel - I/O Fencing agent for Vixel FC switches
SYNOPSIS
fence_vixel [OPTION]...
DESCRIPTION
fence_vixel is an I/O Fencing agent which can be used with Vixel FC
switches. It logs into a Vixel switch via telnet and removes the
specified port from the zone. Removing the zone access from the port
disables the port from being able to access the storage.
fence_vixel accepts options on the command line as well as from stdin.
fenced sends parameters through stdin when it execs the agent.
fence_vixel can be run by itself with command line options which is
useful for testing.
After a fence operation has taken place the fenced machine can no
longer connect to the Vixel FC switch. When the fenced machine is
ready to be brought back into the GFS cluster (after reboot) the port
on the Vixel FC switch needs to be enabled. In order to do this, log
into the Vixel FC switch. Then go to:
config->zones->config <port> <comma-separated-list-of-ports-in-the-
zone>
Then apply
Consult the Vixel manual for details
OPTIONS
-a IPaddress
IP address of the switch.
-h Print out a help message describing available options, then
exit.
-n port
The port number to remove zoning from on the switch.
-p password
Password for login.
-S path
Full path to an executable to generate the password for login.
-V Print out a version message, then exit.
STDIN PARAMETERS
agent = < param >
This option is used by fence_node(8) and is ignored by
fence_vixel.
ipaddr = < hostname | ip >
IP address or hostname of the switch.
passwd = < param >
Password for login.
passwd_script = < param >
Full path to an executable to generate the password for login.
port = < param >
The port number to remove zoning from on the switch.
SEE ALSO
fence(8), fence_node(8)
fence_vixel(8)