NAME
freeipmi.conf - specify default values to FreeIPMI
DESCRIPTION
The FreeIPMI configuration file can be used to set alternate default
values to many FreeIPMI tools so values don’t have to be configured on
the command line. This allows users to avoid typing in a long list of
command line options everytime a command is executed. It can also be
used to hide usernames, passwords, and other sensitive information from
the ps(1) command.
Currently, the tools that can be configured with the configuration file
are: bmc-config(8), bmc-device(8), bmc-info(8), bmc-watchdog(8), ipmi-
chassis(8), ipmi-chassis-config(8), ipmi-fru(8), ipmi-oem(8), ipmi-
raw(8), ipmi-sel(8), ipmi-sensors(8), ipmi-sensors-config(8),
ipmiconsole(8), ipmimonitoring(8), ipmipower(8), and pef-config(8).
By default, the configuration file is stored at /etc/freeipmi.conf. But
users may select a different configuration file at the command line
with the --config-file option.
Values specified on the command line override the configuration values
specified in the configuration file.
FORMAT
The configuration options that can be specified in the configuration
file are listed below. Each configuration option must be listed on a
separate line. Arguments for an option are separated by any amount of
whitespace. Multiple arguments are also separated by whitespace.
Comments can be marked by using the pound sign ("#") character, and
lines can be continued on the next using backslash ("\").
Note that it is possible to list the username, password and other
potentially sensitive information in the configuration file. If this
data is stored in a configuration file, system administrators should
limit access to this file.
GENERAL OPTIONS
The following options are options generally available to all tools,
although specific options may be ignored by some. (For example,
ipmiconsole(8) and ipmipower(8) do not perform in-band communication,
therefore they would ignore in-band communication options. Similarly
bmc-watchdog(8) does not perform out-of-band communication, therefore
it would ignore all out-of-band options).
driver-type IPMIDRIVER
Specify the default driver type to use.
disable-auto-probe ENABLE|DISABLE
Specify if IPMI devices should be probed for default settings.
driver-address DRIVER-ADDRESS
Specify the default in-band driver address to use.
driver-device DEVICE
Specify the default in-band driver device path to use.
register-spacing REGISTER-SPACING
Specify the default in-band driver registerspacing to use.
username USERNAME
Specify the default username to use.
password PASSWORD
Specify the default password to use.
k_g str
Specify the default BMC key (K_g) to use. Prefix with ’0x’ to
enter the key in hex.
session-timeout MILLISECONDS
Specify the default session timeout length to use in
milliseconds.
retransmission-timeout MILLISECONDS
Specify the default retransmission timeout length to use in
milliseconds.
authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use. The following
authentication types are supported: NONE, STRAIGHT_PASSWORD_KEY,
MD2, and MD5.
cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use. The following cipher
suite ids are supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.
privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use. The following
privilege levels are supported: USER, OPERATOR, ADMIN.
workaround-flags WORKAROUNDS
Specify default workaround flags to use. Multiple workarounds
can be specified separated by whitespace. Please see tool
manpages for details about available workarounds for each tool.
The following workarounds are supported: idzero, forcepermsg,
unexpectedauth, endianseq, authcap, solpayloadsize, solport,
intel20, supermicro20, sun20.
SDR OPTIONS
The following options are specific to tools that use the sensor data
repository (SDR). They will be ignored by all other tools.
quiet-cache ENABLE|DISABLE
Specify if cache creation/deletion information should not be
output by default.
sdr-cache-directory DIRECTORY
Specify the default sdr cache directory to use.
HOSTRANGED OPTIONS
The following options are specific to tools that support hostranged
output. They will be ignored by all other tools.
buffer-output ENABLE|DISABLE
Specify if hostranged output should be buffered by default.
consolidate-output ENABLE|DISABLE
Specify if hostranged output should be consolidated by default.
fanout COUNT
Specify the default multiple host fanout to use.
eliminate ENABLE|DISABLE
Specify if undetected hosts should be eliminated by default.
always-prefix ENABLE|DISABLE
Specify if output should be always prefixed by default.
BMC-CONFIG OPTIONS
The following options are specific to bmc-config(8). They will be
ignored by other tools.
bmc-config-username USERNAME
Specify the default username to use for bmc-config(8). If
specified, will override the general option username above.
bmc-config-password PASSWORD
Specify the default password to use for bmc-config(8). If
specified, will override the general option password above.
bmc-config-k_g str
Specify the default BMC key (K_g) to use for bmc-config(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
bmc-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-
config(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
bmc-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-config(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
bmc-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-config(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
bmc-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-config(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see bmc-config(8) manpage for available
workarounds.
BMC-DEVICE OPTIONS
The following options are specific to bmc-device(8). They will be
ignored by other tools.
bmc-device-username USERNAME
Specify the default username to use for bmc-device(8). If
specified, will override the general option username above.
bmc-device-password PASSWORD
Specify the default password to use for bmc-device(8). If
specified, will override the general option password above.
bmc-device-k_g str
Specify the default BMC key (K_g) to use for bmc-device(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
bmc-device-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-
device(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
bmc-device-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-device(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
bmc-device-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-device(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
bmc-device-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-device(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see bmc-device(8) manpage for available
workarounds.
BMC-INFO OPTIONS
The following options are specific to bmc-info(8). They will be
ignored by other tools.
bmc-info-username USERNAME
Specify the default username to use for bmc-info(8). If
specified, will override the general option username above.
bmc-info-password PASSWORD
Specify the default password to use for bmc-info(8). If
specified, will override the general option password above.
bmc-info-k_g str
Specify the default BMC key (K_g) to use for bmc-info(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
bmc-info-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for bmc-info(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
bmc-info-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for bmc-info(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
bmc-info-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for bmc-info(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
bmc-info-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-info(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see bmc-info(8) manpage for available
workarounds.
BMC-WATCHDOG OPTIONS
The following options are specific to bmc-watchdog(8). They will be
ignored by other tools.
bmc-watchdog-workaround-flags WORKAROUNDS
Specify default workaround flags to use for bmc-watchdog(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see bmc-watchdog(8) manpage for available
workarounds.
bmc-watchdog-logfile FILE
Specify the default logfile.
bmc-watchdog-no-logging ENABLE|DISABLE
Specify if logging will be disabled by default.
IPMI-CHASSIS OPTIONS
The following options are specific to ipmi-chassis(8). They will be
ignored by other tools.
ipmi-chassis-username USERNAME
Specify the default username to use for ipmi-chassis(8). If
specified, will override the general option username above.
ipmi-chassis-password PASSWORD
Specify the default password to use for ipmi-chassis(8). If
specified, will override the general option password above.
ipmi-chassis-k_g str
Specify the default BMC key (K_g) to use for ipmi-chassis(8).
If specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmi-chassis-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-
chassis(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-chassis-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-chassis(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-chassis-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-chassis(8).
If specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmi-chassis-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-chassis(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmi-chassis(8) manpage for available
workarounds.
IPMI-CHASSIS-CONFIG OPTIONS
The following options are specific to ipmi-chassis-config(8). They
will be ignored by other tools.
ipmi-chassis-config-username USERNAME
Specify the default username to use for ipmi-chassis-config(8).
If specified, will override the general option username above.
ipmi-chassis-config-password PASSWORD
Specify the default password to use for ipmi-chassis-config(8).
If specified, will override the general option password above.
ipmi-chassis-config-k_g str
Specify the default BMC key (K_g) to use for ipmi-chassis-
config(8). If specified, will override the general option k_g
above. Prefix with ’0x’ to enter the key in hex.
ipmi-chassis-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-chassis-
config(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-chassis-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-chassis-
config(8). If specified, will override the general option
cipher-suite-id above. The following cipher suite ids are
supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.
ipmi-chassis-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-chassis-
config(8). If specified, will override the general option
privilege-level above. The following privilege levels are
supported: USER, OPERATOR, ADMIN.
ipmi-chassis-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-chassis-
config(8). If specified, will override the general options
workaround-flags above. Multiple workarounds can be specified
separated by whitespace. Please see ipmi-chassis-config(8)
manpage for available workarounds.
IPMI-FRU OPTIONS
The following options are specific to ipmi-fru(8). They will be
ignored by other tools.
ipmi-fru-username USERNAME
Specify the default username to use for ipmi-fru(8). If
specified, will override the general option username above.
ipmi-fru-password PASSWORD
Specify the default password to use for ipmi-fru(8). If
specified, will override the general option password above.
ipmi-fru-k_g str
Specify the default BMC key (K_g) to use for ipmi-fru(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmi-fru-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-fru(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-fru-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-fru(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-fru-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-fru(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmi-fru-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-fru(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmi-fru(8) manpage for available
workarounds.
ipmi-fru-skip-checks ENABLE|DISABLE
Specify if checksum checks will be skipped by default.
IPMI-OEM OPTIONS
The following options are specific to ipmi-oem(8). They will be
ignored by other tools.
ipmi-oem-username USERNAME
Specify the default username to use for ipmi-oem(8). If
specified, will override the general option username above.
ipmi-oem-password PASSWORD
Specify the default password to use for ipmi-oem(8). If
specified, will override the general option password above.
ipmi-oem-k_g str
Specify the default BMC key (K_g) to use for ipmi-oem(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmi-oem-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-oem(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-oem-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-oem(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-oem-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-oem(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmi-oem-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-oem(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmi-oem(8) manpage for available
workarounds.
IPMI-RAW OPTIONS
The following options are specific to ipmi-raw(8). They will be
ignored by other tools.
ipmi-raw-username USERNAME
Specify the default username to use for ipmi-raw(8). If
specified, will override the general option username above.
ipmi-raw-password PASSWORD
Specify the default password to use for ipmi-raw(8). If
specified, will override the general option password above.
ipmi-raw-k_g str
Specify the default BMC key (K_g) to use for ipmi-raw(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmi-raw-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-raw(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-raw-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-raw(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-raw-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-raw(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmi-raw-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-raw(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmi-raw(8) manpage for available
workarounds.
IPMI-SEL OPTIONS
The following options are specific to ipmi-sel(8). They will be
ignored by other tools.
ipmi-sel-username USERNAME
Specify the default username to use for ipmi-sel(8). If
specified, will override the general option username above.
ipmi-sel-password PASSWORD
Specify the default password to use for ipmi-sel(8). If
specified, will override the general option password above.
ipmi-sel-k_g str
Specify the default BMC key (K_g) to use for ipmi-sel(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmi-sel-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-sel(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-sel-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sel(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-sel-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sel(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmi-sel-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sel(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmi-sel(8) manpage for available
workarounds.
IPMI-SENSORS OPTIONS
The following options are specific to ipmi-sensors(8). They will be
ignored by other tools.
ipmi-sensors-username USERNAME
Specify the default username to use for ipmi-sensors(8). If
specified, will override the general option username above.
ipmi-sensors-password PASSWORD
Specify the default password to use for ipmi-sensors(8). If
specified, will override the general option password above.
ipmi-sensors-k_g str
Specify the default BMC key (K_g) to use for ipmi-sensors(8).
If specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmi-sensors-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-
sensors(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-sensors-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sensors(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmi-sensors-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sensors(8).
If specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmi-sensors-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sensors(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmi-sensors(8) manpage for available
workarounds.
ipmi-sensors-quiet-readings ENABLE|DISABLE
Specify if sensor reading values and thresholds should not be
output by default.
ipmi-sensors-groups GROUP-LIST
Specify default groups to show sensor outputs for. Multiple
groups can be specified separated by whitespace. Please run
ipmi-sensors(8)’s --list-groups option to see possible groups.
ipmi-sensors-bridge-sensors ENABLE|DISABLE
Specify if non-BMC sensors should be bridged by default or not.
IPMI-SENSORS-CONFIG OPTIONS
The following options are specific to ipmi-sensors-config(8). They
will be ignored by other tools.
ipmi-sensors-config-username USERNAME
Specify the default username to use for ipmi-sensors-config(8).
If specified, will override the general option username above.
ipmi-sensors-config-password PASSWORD
Specify the default password to use for ipmi-sensors-config(8).
If specified, will override the general option password above.
ipmi-sensors-config-k_g str
Specify the default BMC key (K_g) to use for ipmi-sensors-
config(8). If specified, will override the general option k_g
above. Prefix with ’0x’ to enter the key in hex.
ipmi-sensors-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmi-sensors-
config(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmi-sensors-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmi-sensors-
config(8). If specified, will override the general option
cipher-suite-id above. The following cipher suite ids are
supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.
ipmi-sensors-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmi-sensors-
config(8). If specified, will override the general option
privilege-level above. The following privilege levels are
supported: USER, OPERATOR, ADMIN.
ipmi-sensors-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmi-sensors-
config(8). If specified, will override the general options
workaround-flags above. Multiple workarounds can be specified
separated by whitespace. Please see ipmi-sensors-config(8)
manpage for available workarounds.
IPMICONSOLE OPTIONS
The following options are specific to ipmiconsole(8). They will be
ignored by other tools.
ipmiconsole-username USERNAME
Specify the default username to use for ipmiconsole(8). If
specified, will override the general option username above.
ipmiconsole-password PASSWORD
Specify the default password to use for ipmiconsole(8). If
specified, will override the general option password above.
ipmiconsole-k_g str
Specify the default BMC key (K_g) to use for ipmiconsole(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmiconsole-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for
ipmiconsole(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmiconsole-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmiconsole(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmiconsole-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmiconsole(8).
If specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmiconsole-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmiconsole(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmiconsole(8) manpage for available
workarounds.
ipmiconsole-escape-char CHAR
Specify the default escape character.
ipmiconsole-dont-steal ENABLE|DISABLE
Specify if in use SOL sessions should not be stolen by default.
ipmiconsole-lock-memory ENABLE|DISABLE
Specify if memory should be locked by default.
IPMIMONITORING OPTIONS
The following options are specific to ipmimonitoring(8). They will be
ignored by other tools.
ipmimonitoring-username USERNAME
Specify the default username to use for ipmimonitoring(8). If
specified, will override the general option username above.
ipmimonitoring-password PASSWORD
Specify the default password to use for ipmimonitoring(8). If
specified, will override the general option password above.
ipmimonitoring-k_g str
Specify the default BMC key (K_g) to use for ipmimonitoring(8).
If specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmimonitoring-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for
ipmimonitoring(8). If specified, will override the general
option authentication-type above. The following authentication
types are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmimonitoring-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for
ipmimonitoring(8). If specified, will override the general
option cipher-suite-id above. The following cipher suite ids are
supported: 0, 1, 2, 3, 6, 7, 8, 11, 12.
ipmimonitoring-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmimonitoring(8).
If specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmimonitoring-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmimonitoring(8).
If specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmimonitoring(8) manpage for available
workarounds.
ipmimonitoring-quiet-readings ENABLE|DISABLE
Specify if sensor reading values and thresholds should not be
output by default.
ipmimonitoring-groups GROUP-LIST
Specify default groups to show sensor outputs for. Multiple
groups can be specified separated by whitespace. Please run
ipmimonitoring(8)’s --list-groups option to see possible groups.
ipmimonitoring-bridge-sensors ENABLE|DISABLE
Specify if non-BMC sensors should be bridged by default or not.
ipmimonitoring-sensor-config-file FILE
Specify the default sensor configuration file.
IPMIPOWER OPTIONS
The following options are specific to ipmipower(8). They will be
ignored by other tools.
ipmipower-username USERNAME
Specify the default username to use for ipmipower(8). If
specified, will override the general option username above.
ipmipower-password PASSWORD
Specify the default password to use for ipmipower(8). If
specified, will override the general option password above.
ipmipower-k_g str
Specify the default BMC key (K_g) to use for ipmipower(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
ipmipower-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for ipmipower(8).
If specified, will override the general option authentication-
type above. The following authentication types are supported:
NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
ipmipower-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for ipmipower(8). If
specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
ipmipower-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for ipmipower(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
ipmipower-workaround-flags WORKAROUNDS
Specify default workaround flags to use for ipmipower(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see ipmipower(8) manpage for available
workarounds.
ipmipower-on-if-off ENABLE|DISABLE
Specify if on-if-off functionality is enabled or disabled by
default.
ipmipower-wait-until-on ENABLE|DISABLE
Specify if wait-until-on functionality is enabled or disabled by
default.
ipmipower-wait-until-off ENABLE|DISABLE
Specify if wait-until-off functionality is enabled or disabled
by default.
ipmipower-retransmission-wait-timeout MILLISECONDS
Specify the default retransmission wait timeout length to use in
milliseconds.
ipmipower-retransmission-backoff-count COUNT
Specify the default retransmission backoff count to use for
retransmissions.
ipmipower-ping-interval MILLISECONDS
Specify the default ping interval length to use in milliseconds.
ipmipower-ping-timeout MILLISECONDS
Specify the default ping timeout length to use in milliseconds.
ipmipower-ping-packet-count COUNT
Specify the default ping packet count size to use.
ipmipower-ping-percent PERCENT
Specify the default ping percent value to use.
ipmipower-ping-consec-count COUNT
Specify the default ping consecutive count value to use.
PEF-CONFIG OPTIONS
The following options are specific to pef-config(8). They will be
ignored by other tools.
pef-config-username USERNAME
Specify the default username to use for pef-config(8). If
specified, will override the general option username above.
pef-config-password PASSWORD
Specify the default password to use for pef-config(8). If
specified, will override the general option password above.
pef-config-k_g str
Specify the default BMC key (K_g) to use for pef-config(8). If
specified, will override the general option k_g above. Prefix
with ’0x’ to enter the key in hex.
pef-config-authentication-type AUTHENTICATION-TYPE
Specify the default authentication type to use for pef-
config(8). If specified, will override the general option
authentication-type above. The following authentication types
are supported: NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.
pef-config-cipher-suite-id CIPHER-SUITE-ID
Specify the default cipher suite id to use for pef-config(8).
If specified, will override the general option cipher-suite-id
above. The following cipher suite ids are supported: 0, 1, 2, 3,
6, 7, 8, 11, 12.
pef-config-privilege-level PRIVILEGE-LEVEL
Specify the default privilege type to use for pef-config(8). If
specified, will override the general option privilege-level
above. The following privilege levels are supported: USER,
OPERATOR, ADMIN.
pef-config-workaround-flags WORKAROUNDS
Specify default workaround flags to use for pef-config(8). If
specified, will override the general options workaround-flags
above. Multiple workarounds can be specified separated by
whitespace. Please see pef-config(8) manpage for available
workarounds.
FILES
/etc/freeipmi.conf
REPORTING BUGS
Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.
COPYRIGHT
Copyright © 2003-2008 FreeIPMI Core Team.
FreeIPMI is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
SEE ALSO
freeipmi(7), bmc-config(8), bmc-device(8), bmc-info(8), bmc-
watchdog(8), ipmi-chassis(8), ipmi-fru(8), ipmi-oem(8), ipmi-raw(8),
ipmi-sel(8), ipmi-sensors(8), ipmi-sensors-config(8), ipmiconsole(8),
ipmimonitoring(8), ipmipower(8), pef-config(8)
http://www.gnu.org/software/freeipmi/