NAME
vdr-sxfe - Remote X-Server frontend for vdr-plugin-xineliboutput
SYNOPSIS
vdr-sxfe [options] [xvdr[+udp|+tcp|+rtp]:[//host[:port]]]
DESCRIPTION
vdr-sxfe is a X/Xv/XvMc remote frontend, that plays back streams
provided by vdr-plugin-xineliboutput.
OPTIONS
--help Show (this) help message
--audio=audiodriver[:device]
Select audio driver and optional port
--video=videodriver[:device]
Select video driver and optional port As far as supported,
possible video drivers might be: xshm, xv, xvmc, xxmc, vidix,
XDirectFB, opengl, sdl or none
--display=displayaddress
X11 display address
--wid=id
Use existing X11 window
--aspect=[auto|4:3|16:9|16:10|default]
Display aspect ratio (You can us a script to control the HW
aspect ratio: --aspect=auto:path_to_script)
--fullscreen
Fullscreen mode
--hud Head Up Display OSD mode
--width=x
Video window width
--height=x
Video window height
--noscaling
Disable all video scaling
--post=name[:arg=val[,arg=val]]
Load and use xine post plugins, e.g.:
· --post=upmix
· --post=upmix;tvtime:enabled=1,cheap_mode=1)
--lirc[=devicename]
Use lirc input device Optional lirc socket name can be given
--verbose
Verbose debug output
--silent
Silent mode (report only errors)
--syslog
Write all output to system log
--nokbd
Disable keyboard input
--daemon
Run as daemon (disable keyboard, log to syslog and fork to
background)
--slave
Enable slave mode (read commands from stdin)
--reconnect
Automatically reconnect when connection has been lost
--tcp, --udp, --rtp
Use TCP, UDP or RTP transport If no transport options are given,
transports are tried in following order: local pipe, rtp, udp,
tcp
EXAMPLES
Search for VDR (xineliboutput) server, connect to it and negotiate best
available transport, use best available audio:
vdr-sxfe
Connect to 192.168.1.3 default port and negoate best available
transport:
vdr-sxfe xvdr://192.168.1.3
Connect to 192.168.2.100, port 12550 and use TCP transport:
vdr-sxfe xvdr+tcp://192.168.2.100:12550
Automatically search for VDR server and use UDP transport:
vdr-sxfe xvdr+udp:
vdr-syfe --udp
Use alsa:
vdr-sxfe --audio alsa
Use alsa (and specific card/sub-device):
vdr-sxfe --audio alsa:plughw:1,1
Video driver (and display / device):
vdr-sxfe --video xv
vdr-sxfe --video xvmc:127.0.0.1:1.0
NOTE
If deinterlacing post plugin options are not given at command line,
deinterlacing is controlled by VDR plugin configuration menu settings.
De-interlacing can also be forced on or off with command-line option
"--post tvtime". Examples:
vdr-sxfe --post tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
vdr-sxfe --post tvtime:enable=0
AUTHOR
This manual page was written by Tobias Grimm <etobi@debian.org>
15 June 2010 vdr-sxfe(1)