NAME
pysnmpcmd - options and behaviour common to most of the PySNMP command-
line tools
SYNOPSIS
pysnmpcmd [OPTIONS] AGENT [PARAMETERS]
DESCRIPTION
This manual page describes the common options for the PySNMP commands:
pysnmpbulkwalk, pysnmpget, pysnmpset, pysnmptranslate, pysnmpwalk. The
command line applications use the SNMP protocol to communicate with an
SNMP capable network entity, an agent. Individual applications
typically (but not necessarily) take additional parameters that are
given after the agent specification. These parameters are documented
in the manual pages for each application.
OPTIONS
-a authProtocol
Set the authentication protocol (MD5 or SHA) used for
authenticated SNMPv3 messages.
-A authPassword
Set the authentication pass phrase used for authenticated SNMPv3
messages.
-c community
Set the community string for SNMPv1/v2c transactions.
-d Dump (in hexadecimal) the raw SNMP packets sent and received.
-D TOKEN[,...]
Turn on debugging output for the given TOKEN(s). Try all for
extremely verbose output.
-e engineID
Set the authoritative (security) engineID used for SNMPv3
REQUEST messages. It is typically not necessary to specify
this, as it will usually be discovered automatically.
-E engineID
Set the context engineID used for SNMPv3 REQUEST messages
scopedPdu. If not specified, this will default to the
authoritative engineID.
-h, --help
Display a brief usage message and then exit.
-H Display a list of configuration file directives understood by
the command and then exit.
-I [hu]
Specifies input parsing options. See INPUT OPTIONS below.
-l secLevel
Set the securityLevel used for SNMPv3 messages
(noAuthNoPriv|authNoPriv|authPriv). Appropriate pass phrase(s)
must provided when using any level higher than noAuthNoPriv.
-m MIBLIST
Specifies a colon separated list of MIB modules (not files) to
load for this application.
The special keyword ALL is used to load all MIB modules in the
MIB directory search list. Every file whose name does not begin
with "." will be parsed as if it were a MIB file.
-M DIRLIST
Specifies a colon separated list of directories to search for
MIBs. Note that MIBs specified using the -m option will be
loaded from one of the directories listed by the -M option (or
equivalents).
-n contextName
Set the contextName used for SNMPv3 messages. The default
contextName is the empty string "".
-O [abeEfnqQsStTuUvxX]
Specifies output printing options. See OUTPUT OPTIONS below.
-r retries
Specifies the number of retries to be used in the requests. The
default is 5.
-t timeout
Specifies the timeout in seconds between retries. The default is
1.
-u secName
Set the securityName used for authenticated SNMPv3 messages.
-v 1 | 2c | 3
Specifies the protocol version to use: 1 (RFCs 1155-1157), 2c
(RFCs 1901-1908), or 3 (RFCs 2571-2574). The default is
typically version 3.
-V, --version
Display version information for the application and then exit.
-x privProtocol
Set the privacy protocol (DES or AES) used for encrypted SNMPv3
messages.
-X privPassword
Set the privacy pass phrase used for encrypted SNMPv3 messages.
-Z boots,time
Set the engineBoots and engineTime used for authenticated SNMPv3
messages. This will initialize the local notion of the agents
boots/time with an authenticated value stored in the LCD. It is
typically not necessary to specify this option, as these values
will usually be discovered automatically.
AGENT SPECIFICATION
The string AGENT in the SYNOPSIS above specifies the remote SNMP entity
with which to communicate. This specification takes the form:
[<transport-specifier>:]<transport-address>
At its simplest, the AGENT specification may consist of a hostname, or
an IPv4 address in the standard "dotted quad" notation. In this case,
communication will be attempted using UDP/IPv4 to port 161 of the given
host. Otherwise, the <transport-address> part of the specification is
parsed according to the following table:
<transport-specifier> <transport-address> format
udp hostname[:port] or IPv4-address[:port]
Note that <transport-specifier> strings are case-insensitive so that,
for example, "tcp" and "TCP" are equivalent. Here are some examples,
along with their interpretation:
hostname:161 perform query using UDP/IPv4 datagrams to
hostname on port 161. The ":161" is redundant
here since that is the default SNMP port in any
case.
udp:hostname identical to the previous specification. The
"udp:" is redundant here since UDP/IPv4 is the
default transport.
OUTPUT OPTIONS
The format of the output from SNMP commands can be controlled using
various parameters of the -O flag. The effects of these sub-options
can be seen by comparison with the following default output (unless
otherwise specified):
$ snmpget -c public -v 1 localhost sysUpTime.0
SNMPv2-MIB::sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63
-Oa Display string values as ASCII strings (unless there is a
DISPLAY-HINT defined for the corresponding MIB object). By
default, the library attempts to determine whether the value is
a printable or binary string, and displays it accordingly.
This option does not affect objects that do have a Display Hint.
-Ob Display table indexes numerically, rather than trying to
interpret the instance subidentifiers as string or OID values:
$ snmpgetnext -c public -v 1 localhost vacmSecurityModel
SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0."wes" = xxx
$ snmpgetnext -c public -v 1 -Ob localhost vacmSecurityModel
SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0.3.119.101.115 = xxx
-Oe Removes the symbolic labels from enumeration values:
$ snmpget -c public -v 1 localhost ipForwarding.0
IP-MIB::ipForwarding.0 = INTEGER: forwarding(1)
$ snmpget -c public -v 1 -Oe localhost ipForwarding.0
IP-MIB::ipForwarding.0 = INTEGER: 1
-OE Modifies index strings to escape the quote characters:
$ snmpgetnext -c public -v 1 localhost vacmSecurityModel
SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0."wes" = xxx
$ snmpgetnext -c public -v 1 -OE localhost vacmSecurityModel
SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0.\"wes\" = xxx
This allows the output to be reused in shell commands.
-Of Include the full list of MIB objects when displaying an OID:
.iso.org.dod.internet.mgmt.mib-2.system.sysUpTime.0 =
Timeticks: (14096763) 1 day, 15:09:27.63
-On Displays the OID numerically:
.1.3.6.1.2.1.1.3.0 = Timeticks: (14096763) 1 day,
15:09:27.63
-Oq Removes the equal sign and type information when displaying
varbind values:
SNMPv2-MIB::sysUpTime.0 1:15:09:27.63
-OQ Removes the type information when displaying varbind values:
SNMPv2-MIB::sysUpTime.0 = 1:15:09:27.63
-Os Display the MIB object name (plus any instance or other
subidentifiers):
sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63
-OS Display the name of the MIB, as well as the object name:
SNMPv2-MIB::sysUpTime.0 = Timeticks: (14096763) 1 day,
15:09:27.63
This is the default OID output format.
-Ot Display TimeTicks values as raw numbers:
SNMPv2-MIB::sysUpTime.0 = 14096763
-OT If values are printed as Hex strings, display a printable
version as well.
-Ou Display the OID in the traditional UCD-style (inherited from the
original CMU code). That means removing a series of "standard"
prefixes from the OID, and displaying the remaining list of MIB
object names (plus any other subidentifiers):
system.sysUpTime.0 = Timeticks: (14096763) 1 day,
15:09:27.63
-OU Do not print the UNITS suffix at the end of the value.
-Ov Display the varbind value only, not the OID:
$ snmpget -c public -v 1 -Oe localhost ipForwarding.0
INTEGER: forwarding(1)
-Ox Display string values as Hex strings (unless there is a DISPLAY-
HINT defined for the corresponding MIB object). By default, the
library attempts to determine whether the value is a printable
or binary string, and displays it accordingly.
This option does not affect objects that do have a Display Hint.
-OX Display table indexes in a more "program like" output, imitating
a traditional array-style index format:
$ snmpgetnext -c public -v 1 localhost ipv6RouteTable
IPv6-MIB::ipv6RouteIfIndex.63.254.1.0.255.0.0.0.0.0.0.0.0.0.0.0.64.1 = INTEGER: 2
$ snmpgetnext -c public -v 1 -OE localhost ipv6RouteTable
IPv6-MIB::ipv6RouteIfIndex[3ffe:100:ff00:0:0:0:0:0][64][1] = INTEGER: 2
Most of these options can also be configured via configuration tokens.
See the snmp.conf(5) manual page for details.
INPUT OPTIONS
The interpretation of input object names and the values to be assigned
can be controlled using various parameters of the -I flag. The default
behaviour will be described at the end of this section.
-Ib specifies that the given name should be regarded as a regular
expression, to match (case-insensitively) against object names
in the MIB tree. The "best" match will be used - calculated as
the one that matches the closest to the beginning of the node
name and the highest in the tree. For example, the MIB object
vacmSecurityModel could be matched by the expression
vacmsecuritymodel (full name, but different case), or
vacm.*model (regexp pattern).
Note that ’.’ is a special character in regular expression
patterns, so the expression cannot specify instance
subidentifiers or more than one object name. A "best match"
expression will only be applied against single MIB object names.
For example, the expression sys*ontact.0 would not match the
instance sysContact.0 (although sys*ontact would match
sysContact). Similarly, specifying a MIB module name will not
succeed (so SNMPv2-MIB::sys.*ontact would not match either).
-Ih disables the use of DISPLAY-HINT information when assigning
values. This would then require providing the raw value:
snmpset ... HOST-RESOURCES-MIB::hrSystemData.0
x "07 D2 0C 0A 02 04 06 08"
instead of a formatted version:
snmpset ... HOST-RESOURCES-MIB::hrSystemDate.0
= 2002-12-10,2:4:6.8
-Ir disables checking table indexes and the value to be assigned
against the relevant MIB definitions. This will (hopefully)
result in the remote agent reporting an invalid request, rather
than checking (and rejecting) this before it is sent to the
remote agent.
Local checks are more efficient (and the diagnostics provided
also tend to be more precise), but disabling this behaviour is
particularly useful when testing the remote agent.
-IR enables "random access" lookup of MIB names. Rather than
providing a full OID path to the desired MIB object (or
qualifying this object with an explicit MIB module name), the
MIB tree will be searched for the matching object name. Thus
.iso.org.dod.internet.mib-2.system.sysDescr.0 (or
SNMPv2-MIB::sysDescr.0) can be specified simply as sysDescr.0.
Warning:
Since MIB object names are not globally unique, this
approach may return a different MIB object depending on
which MIB files have been loaded.
The MIB-MODULE::objectName syntax has the advantage of uniquely
identifying a particular MIB object, as well as being slightly
more efficient (and automatically loading the necessary MIB file
if necessary).
-Is SUFFIX
adds the specified suffix to each textual OID given on the
command line. This can be used to retrieve multiple objects
from the same row of a table, by specifying a common index
value.
-IS PREFIX
adds the specified prefix to each textual OID given on the
command line. This can be used to specify an explicit MIB
module name for all objects being retrieved (or for incurably
lazy typists).
-Iu enables the traditional UCD-style approach to interpreting input
OIDs. This assumes that OIDs are rooted at the ’mib-2’ point in
the tree (unless they start with an explicit ’.’ or include a
MIB module name). So the sysDescr instance above would be
referenced as system.sysDescr.0.
Object names specified with a leading ’.’ are always interpreted as
"fully qualified" OIDs, listing the sequence of MIB objects from the
root of the MIB tree. Such objects and those qualified by an explicit
MIB module name are unaffected by the -Ib, -IR and -Iu flags.
Otherwise, if none of the above input options are specified, the
default behaviour for a "relative" OID is to try and interpret it as an
(implicitly) fully qualified OID, then apply "random access" lookup
(-IR), followed by "best match" pattern matching (-Ib).
ENVIRONMENT VARIABLES
PREFIX The standard prefix for object identifiers (when using UCD-style
output). Defaults to .iso.org.dod.internet.mgmt.mib-2
MIBS The list of MIBs to load. Defaults to SNMPv2-TC:SNMPv2-MIB:IF-
MIB:IP-MIB:TCP-MIB:UDP-MIB:SNMP-VACM-MIB. Overridden by the -m
option.
MIBDIRS
The list of directories to search for MIBs. Defaults to
DATADIR/snmp/mibs. Overridden by the -M option.
FILES
SYSCONFDIR/snmp/snmpd.conf
Agent configuration file. See snmpd.conf(5).
SYSCONFDIR/snmp/snmp.conf
~/.snmp/snmp.conf
Application configuration files. See snmp.conf(5).
SEE ALSO
pysnmpbulkwalk(1), pysnmpget(1), pysnmpset(1), pysnmpbulktranslate(1),
pysnmpwalk(1).