NAME
rhino - Driver for Brazilian Microsol RHINO UPS equipment
NOTE
This man page only documents the hardware-specific features of the
rhino driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver has been tested with :
Rhino 6000 VA
Rhino 7500 VA
Rhino 10000 VA
Rhino 20000 VA
All Rhino models are senoidal on-line
EXTRA ARGUMENTS
This driver support the following extra optional settings in the
ups.conf(5).
battext = n - (default = 0, no extra battery, where n = Ampere*hour )
UPSCMD
load.on - Turn on the load immediately
load.off - Turn off the load immediately
bypass.start - Put the UPS in bypass mode
bypass.stop - Put the UPS out of bypass mode
shutdown.stayoff - Shut down in 3 minutes and do not return
AUTHOR
Silvino B. Magalhaes <sbm2yk@gmail.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Wed Nov 30 2005