NAME
net - Tool for administration of Samba and remote CIFS servers.
SYNOPSIS
net {<ads|rap|rpc>} [-h] [-w workgroup] [-W myworkgroup] [-U user]
[-I ip-address] [-p port] [-n myname] [-s conffile] [-S server] [-l]
[-P] [-d debuglevel] [-V] [--request-timeout seconds]
DESCRIPTION
This tool is part of the samba(7) suite.
The Samba net utility is meant to work just like the net utility
available for windows and DOS. The first argument should be used to
specify the protocol to use when executing a certain command. ADS is
used for ActiveDirectory, RAP is using for old (Win9x/NT3) clients and
RPC can be used for NT4 and Windows 2000. If this argument is omitted,
net will try to determine it automatically. Not all commands are
available on all protocols.
OPTIONS
-h|--help
Print a summary of command line options.
-w target-workgroup
Sets target workgroup or domain. You have to specify either this
option or the IP address or the name of a server.
-W workgroup
Sets client workgroup or domain
-U user
User name to use
-I ip-address
IP address of target server to use. You have to specify either this
option or a target workgroup or a target server.
-p port
Port on the target server to connect to (usually 139 or 445).
Defaults to trying 445 first, then 139.
-n|--netbiosname <primary NetBIOS name>
This option allows you to override the NetBIOS name that Samba uses
for itself. This is identical to setting the smb.conf.html#
parameter in the smb.conf file. However, a command line setting
will take precedence over settings in smb.conf.
-s|--configfile <configuration file>
The file specified contains the configuration details required by
the server. The information in this file includes server-specific
information such as what printcap file to use, as well as
descriptions of all the services that the server is to provide. See
smb.conf for more information. The default configuration file name
is determined at compile time.
-S server
Name of target server. You should specify either this option or a
target workgroup or a target IP address.
-l
When listing data, give more information on each item.
-P
Make queries to the external server using the machine account of
the local server.
--request-timeout 30
Let client requests timeout after 30 seconds the default is 10
seconds.
-d|--debuglevel=level
level is an integer from 0 to 10. The default value if this
parameter is not specified is 0.
The higher this value, the more detail will be logged to the log
files about the activities of the server. At level 0, only critical
errors and serious warnings will be logged. Level 1 is a reasonable
level for day-to-day running - it generates a small amount of
information about operations carried out.
Levels above 1 will generate considerable amounts of log data, and
should only be used when investigating a problem. Levels above 3
are designed for use only by developers and generate HUGE amounts
of log data, most of which is extremely cryptic.
Note that specifying this parameter here will override the
smb.conf.html# parameter in the smb.conf file.
COMMANDS
CHANGESECRETPW
This command allows the Samba machine account password to be set from
an external application to a machine account password that has already
been stored in Active Directory. DO NOT USE this command unless you
know exactly what you are doing. The use of this command requires that
the force flag (-f) be used also. There will be NO command prompt.
Whatever information is piped into stdin, either by typing at the
command line or otherwise, will be stored as the literal machine
password. Do NOT use this without care and attention as it will
overwrite a legitimate machine password without warning. YOU HAVE BEEN
WARNED.
TIME
The NET TIME command allows you to view the time on a remote server or
synchronise the time on the local server with the time on the remote
server.
TIME
Without any options, the NET TIME command displays the time on the
remote server.
TIME SYSTEM
Displays the time on the remote server in a format ready for /bin/date.
TIME SET
Tries to set the date and time of the local server to that on the
remote server using /bin/date.
TIME ZONE
Displays the timezone in hours from GMT on the remote computer.
[RPC|ADS] JOIN [TYPE] [-U username[%password]] [createupn=UPN]
[createcomputer=OU] [options]
Join a domain. If the account already exists on the server, and [TYPE]
is MEMBER, the machine will attempt to join automatically. (Assuming
that the machine has been created in server manager) Otherwise, a
password will be prompted for, and a new account may be created.
[TYPE] may be PDC, BDC or MEMBER to specify the type of server joining
the domain.
[UPN] (ADS only) set the principalname attribute during the join. The
default format is host/netbiosname@REALM.
[OU] (ADS only) Precreate the computer account in a specific OU. The OU
string reads from top to bottom without RDNs, and is delimited by a
'/'. Please note that '\' is used for escape by both the shell and
ldap, so it may need to be doubled or quadrupled to pass through, and
it is not used as a delimiter.
[RPC] OLDJOIN [options]
Join a domain. Use the OLDJOIN option to join the domain using the old
style of domain joining - you need to create a trust account in server
manager first.
[RPC|ADS] USER
[RPC|ADS] USER
List all users
[RPC|ADS] USER DELETE target
Delete specified user
[RPC|ADS] USER INFO target
List the domain groups of the specified user.
[RPC|ADS] USER RENAME oldname newname
Rename specified user.
[RPC|ADS] USER ADD name [password] [-F user flags] [-C comment]
Add specified user.
[RPC|ADS] GROUP
[RPC|ADS] GROUP [misc options] [targets]
List user groups.
[RPC|ADS] GROUP DELETE name [misc. options]
Delete specified group.
[RPC|ADS] GROUP ADD name [-C comment]
Create specified group.
[RAP|RPC] SHARE
[RAP|RPC] SHARE [misc. options] [targets]
Enumerates all exported resources (network shares) on target server.
[RAP|RPC] SHARE ADD name=serverpath [-C comment] [-M maxusers] [targets]
Adds a share from a server (makes the export active). Maxusers
specifies the number of users that can be connected to the share
simultaneously.
SHARE DELETE sharename
Delete specified share.
[RPC|RAP] FILE
[RPC|RAP] FILE
List all open files on remote server.
[RPC|RAP] FILE CLOSE fileid
Close file with specified fileid on remote server.
[RPC|RAP] FILE INFO fileid
Print information on specified fileid. Currently listed are: file-id,
username, locks, path, permissions.
[RAP|RPC] FILE USER user
List files opened by specified user. Please note that net rap file user
does not work against Samba servers.
SESSION
RAP SESSION
Without any other options, SESSION enumerates all active SMB/CIFS
sessions on the target server.
RAP SESSION DELETE|CLOSE CLIENT_NAME
Close the specified sessions.
RAP SESSION INFO CLIENT_NAME
Give a list with all the open files in specified session.
RAP SERVER DOMAIN
List all servers in specified domain or workgroup. Defaults to local
domain.
RAP DOMAIN
Lists all domains and workgroups visible on the current network.
RAP PRINTQ
RAP PRINTQ INFO QUEUE_NAME
Lists the specified print queue and print jobs on the server. If the
QUEUE_NAME is omitted, all queues are listed.
RAP PRINTQ DELETE JOBID
Delete job with specified id.
RAP VALIDATE user [password]
Validate whether the specified user can log in to the remote server. If
the password is not specified on the commandline, it will be prompted.
Note
Currently NOT implemented.
RAP GROUPMEMBER
RAP GROUPMEMBER LIST GROUP
List all members of the specified group.
RAP GROUPMEMBER DELETE GROUP USER
Delete member from group.
RAP GROUPMEMBER ADD GROUP USER
Add member to group.
RAP ADMIN command
Execute the specified command on the remote server. Only works with
OS/2 servers.
Note
Currently NOT implemented.
RAP SERVICE
RAP SERVICE START NAME [arguments...]
Start the specified service on the remote server. Not implemented yet.
Note
Currently NOT implemented.
RAP SERVICE STOP
Stop the specified service on the remote server.
Note
Currently NOT implemented.
RAP PASSWORD USER OLDPASS NEWPASS
Change password of USER from OLDPASS to NEWPASS.
LOOKUP
LOOKUP HOST HOSTNAME [TYPE]
Lookup the IP address of the given host with the specified type
(netbios suffix). The type defaults to 0x20 (workstation).
LOOKUP LDAP [DOMAIN]
Give IP address of LDAP server of specified DOMAIN. Defaults to local
domain.
LOOKUP KDC [REALM]
Give IP address of KDC for the specified REALM. Defaults to local
realm.
LOOKUP DC [DOMAIN]
Give IP's of Domain Controllers for specified
DOMAIN. Defaults to local domain.
LOOKUP MASTER DOMAIN
Give IP of master browser for specified DOMAIN or workgroup. Defaults
to local domain.
CACHE
Samba uses a general caching interface called 'gencache'. It can be
controlled using 'NET CACHE'.
All the timeout parameters support the suffixes:
s - Seconds
m - Minutes
h - Hours
d - Days
w - Weeks
CACHE ADD key data time-out
Add specified key+data to the cache with the given timeout.
CACHE DEL key
Delete key from the cache.
CACHE SET key data time-out
Update data of existing cache entry.
CACHE SEARCH PATTERN
Search for the specified pattern in the cache data.
CACHE LIST
List all current items in the cache.
CACHE FLUSH
Remove all the current items from the cache.
GETLOCALSID [DOMAIN]
Prints the SID of the specified domain, or if the parameter is omitted,
the SID of the local server.
SETLOCALSID S-1-5-21-x-y-z
Sets SID for the local server to the specified SID.
GETDOMAINSID
Prints the local machine SID and the SID of the current domain.
SETDOMAINSID
Sets the SID of the current domain.
GROUPMAP
Manage the mappings between Windows group SIDs and UNIX groups. Common
options include:
o unixgroup - Name of the UNIX group
o ntgroup - Name of the Windows NT group (must be resolvable to a SID
o rid - Unsigned 32-bit integer
o sid - Full SID in the form of "S-1-..."
o type - Type of the group; either 'domain', 'local', or 'builtin'
o comment - Freeform text description of the group
GROUPMAP ADD
Add a new group mapping entry:
net groupmap add {rid=int|sid=string} unixgroup=string \
[type={domain|local}] [ntgroup=string] [comment=string]
GROUPMAP DELETE
Delete a group mapping entry. If more than one group name matches, the
first entry found is deleted.
net groupmap delete {ntgroup=string|sid=SID}
GROUPMAP MODIFY
Update en existing group entry.
net groupmap modify {ntgroup=string|sid=SID} [unixgroup=string] \
[comment=string] [type={domain|local}]
GROUPMAP LIST
List existing group mapping entries.
net groupmap list [verbose] [ntgroup=string] [sid=SID]
MAXRID
Prints out the highest RID currently in use on the local server (by the
active 'passdb backend').
RPC INFO
Print information about the domain of the remote server, such as domain
name, domain sid and number of users and groups.
[RPC|ADS] TESTJOIN
Check whether participation in a domain is still valid.
[RPC|ADS] CHANGETRUSTPW
Force change of domain trust password.
RPC TRUSTDOM
RPC TRUSTDOM ADD DOMAIN
Add a interdomain trust account for DOMAIN. This is in fact a Samba
account named DOMAIN$ with the account flag 'I' (interdomain trust
account). This is required for incoming trusts to work. It makes Samba
be a trusted domain of the foreign (trusting) domain. Users of the
Samba domain will be made available in the foreign domain. If the
command is used against localhost it has the same effect as smbpasswd
-a -i DOMAIN. Please note that both commands expect a appropriate UNIX
account.
RPC TRUSTDOM DEL DOMAIN
Remove interdomain trust account for DOMAIN. If it is used against
localhost it has the same effect as smbpasswd -x DOMAIN$.
RPC TRUSTDOM ESTABLISH DOMAIN
Establish a trust relationship to a trusted domain. Interdomain account
must already be created on the remote PDC. This is required for
outgoing trusts to work. It makes Samba be a trusting domain of a
foreign (trusted) domain. Users of the foreign domain will be made
available in our domain. You'll need winbind and a working idmap config
to make them appear in your system.
RPC TRUSTDOM REVOKE DOMAIN
Abandon relationship to trusted domain
RPC TRUSTDOM LIST
List all interdomain trust relationships.
RPC RIGHTS
This subcommand is used to view and manage Samba's rights assignments
(also referred to as privileges). There are three options currently
available: list, grant, and revoke. More details on Samba's privilege
model and its use can be found in the Samba-HOWTO-Collection.
RPC ABORTSHUTDOWN
Abort the shutdown of a remote server.
RPC SHUTDOWN [-t timeout] [-r] [-f] [-C message]
Shut down the remote server.
-r
Reboot after shutdown.
-f
Force shutting down all applications.
-t timeout
Timeout before system will be shut down. An interactive user of the
system can use this time to cancel the shutdown.
-C message
Display the specified message on the screen to announce the
shutdown.
RPC SAMDUMP
Print out sam database of remote server. You need to run this against
the PDC, from a Samba machine joined as a BDC.
RPC VAMPIRE
Export users, aliases and groups from remote server to local server.
You need to run this against the PDC, from a Samba machine joined as a
BDC.
RPC VAMPIRE KEYTAB
Dump remote SAM database to local Kerberos keytab file.
RPC VAMPIRE LDIF
Dump remote SAM database to local LDIF file or standard output.
RPC GETSID
Fetch domain SID and store it in the local secrets.tdb.
ADS LEAVE
Make the remote host leave the domain it is part of.
ADS STATUS
Print out status of machine account of the local machine in ADS. Prints
out quite some debug info. Aimed at developers, regular users should
use NET ADS TESTJOIN.
ADS PRINTER
ADS PRINTER INFO [PRINTER] [SERVER]
Lookup info for PRINTER on SERVER. The printer name defaults to "*",
the server name defaults to the local host.
ADS PRINTER PUBLISH PRINTER
Publish specified printer using ADS.
ADS PRINTER REMOVE PRINTER
Remove specified printer from ADS directory.
ADS SEARCH EXPRESSION ATTRIBUTES...
Perform a raw LDAP search on a ADS server and dump the results. The
expression is a standard LDAP search expression, and the attributes are
a list of LDAP fields to show in the results.
Example: net ads search '(objectCategory=group)' sAMAccountName
ADS DN DN (attributes)
Perform a raw LDAP search on a ADS server and dump the results. The DN
standard LDAP DN, and the attributes are a list of LDAP fields to show
in the result.
Example: net ads dn 'CN=administrator,CN=Users,DC=my,DC=domain'
SAMAccountName
ADS WORKGROUP
Print out workgroup name for specified kerberos realm.
SAM CREATEBUILTINGROUP <NAME>
(Re)Create a BUILTIN group. Only a wellknown set of BUILTIN groups can
be created with this command. This is the list of currently recognized
group names: Administrators, Users, Guests, Power Users, Account
Operators, Server Operators, Print Operators, Backup Operators,
Replicator, RAS Servers, Pre-Windows 2000 compatible Access. This
command requires a running Winbindd with idmap allocation properly
configured. The group gid will be allocated out of the winbindd range.
SAM CREATELOCALGROUP <NAME>
Create a LOCAL group (also known as Alias). This command requires a
running Winbindd with idmap allocation properly configured. The group
gid will be allocated out of the winbindd range.
SAM DELETELOCALGROUP <NAME>
Delete an existing LOCAL group (also known as Alias).
SAM MAPUNIXGROUP <NAME>
Map an existing Unix group and make it a Domain Group, the domain group
will have the same name.
SAM UNMAPUNIXGROUP <NAME>
Remove an existing group mapping entry.
SAM ADDMEM <GROUP> <MEMBER>
Add a member to a Local group. The group can be specified only by name,
the member can be specified by name or SID.
SAM DELMEM <GROUP> <MEMBER>
Remove a member from a Local group. The group and the member must be
specified by name.
SAM LISTMEM <GROUP>
List Local group members. The group must be specified by name.
SAM LIST <users|groups|localgroups|builtin|workstations> [verbose]
List the specified set of accounts by name. If verbose is specified,
the rid and description is also provided for each account.
SAM RIGHTS LIST
List all available privileges.
SAM RIGHTS GRANT <NAME> <PRIVILEGE>
Grant one or more privileges to a user.
SAM RIGHTS REVOKE <NAME> <PRIVILEGE>
Revoke one or more privileges from a user.
SAM SHOW <NAME>
Show the full DOMAIN\\NAME the SID and the type for the corresponding
account.
SAM SET HOMEDIR <NAME> <DIRECTORY>
Set the home directory for a user account.
SAM SET PROFILEPATH <NAME> <PATH>
Set the profile path for a user account.
SAM SET COMMENT <NAME> <COMMENT>
Set the comment for a user or group account.
SAM SET FULLNAME <NAME> <FULL NAME>
Set the full name for a user account.
SAM SET LOGONSCRIPT <NAME> <SCRIPT>
Set the logon script for a user account.
SAM SET HOMEDRIVE <NAME> <DRIVE>
Set the home drive for a user account.
SAM SET WORKSTATIONS <NAME> <WORKSTATIONS>
Set the workstations a user account is allowed to log in from.
SAM SET DISABLE <NAME>
Set the "disabled" flag for a user account.
SAM SET PWNOTREQ <NAME>
Set the "password not required" flag for a user account.
SAM SET AUTOLOCK <NAME>
Set the "autolock" flag for a user account.
SAM SET PWNOEXP <NAME>
Set the "password do not expire" flag for a user account.
SAM SET PWDMUSTCHANGENOW <NAME> [yes|no]
Set or unset the "password must change" flag for a user account.
SAM POLICY LIST
List the available account policies.
SAM POLICY SHOW <account policy>
Show the account policy value.
SAM POLICY SET <account policy> <value>
Set a value for the account policy. Valid values can be: "forever",
"never", "off", or a number.
SAM PROVISION
Only available if ldapsam:editposix is set and winbindd is running.
Properly populates the ldap tree with the basic accounts
(Administrator) and groups (Domain Users, Domain Admins, Domain Guests)
on the ldap tree.
IDMAP DUMP <local tdb file name>
Dumps the mappings contained in the local tdb file specified. This
command is useful to dump only the mappings produced by the idmap_tdb
backend.
IDMAP RESTORE [input file]
Restore the mappings from the specified file or stdin.
IDMAP SECRET <DOMAIN>|ALLOC <secret>
Store a secret for the specified domain, used primarily for domains
that use idmap_ldap as a backend. In this case the secret is used as
the password for the user DN used to bind to the ldap server.
USERSHARE
Starting with version 3.0.23, a Samba server now supports the ability
for non-root users to add user-defined shares to be exported using the
"net usershare" commands.
Members of the UNIX group "sambashare" can create user-defined shares
on demand using the commands below.
The usershare commands are:
net usershare add sharename path [comment [acl] [guest_ok=[y|n]]] -
to add or change a user defined share.
net usershare delete sharename - to delete a user defined share.
net usershare info [-l|--long] [wildcard sharename] - to print info
about a user defined share.
net usershare list [-l|--long] [wildcard sharename] - to list user
defined shares.
USERSHARE ADD sharename path [comment] [acl] [guest_ok=[y|n]]
Add or replace a new user defined share, with name "sharename".
"path" specifies the absolute pathname on the system to be exported.
Restrictions may be put on this, see the global smb.conf parameters:
"usershare owner only", "usershare prefix allow list", and "usershare
prefix deny list".
The optional "comment" parameter is the comment that will appear on the
share when browsed to by a client.
The optional "acl" field specifies which users have read and write
access to the entire share. Note that guest connections are not allowed
unless the smb.conf parameter "usershare allow guests" has been set.
The definition of a user defined share acl is: "user:permission", where
user is a valid username on the system and permission can be "F", "R",
or "D". "F" stands for "full permissions", ie. read and write
permissions. "D" stands for "deny" for a user, ie. prevent this user
from accessing this share. "R" stands for "read only", ie. only allow
read access to this share (no creation of new files or directories or
writing to files).
The default if no "acl" is given is "Everyone:R", which means any
authenticated user has read-only access.
The optional "guest_ok" has the same effect as the parameter of the
same name in smb.conf, in that it allows guest access to this user
defined share. This parameter is only allowed if the global parameter
"usershare allow guests" has been set to true in the smb.conf.
There is no separate command to modify an existing user defined share,
just use the "net usershare add [sharename]" command using the same
sharename as the one you wish to modify and specify the new options you
wish. The Samba smbd daemon notices user defined share modifications at
connect time so will see the change immediately, there is no need to
restart smbd on adding, deleting or changing a user defined share.
USERSHARE DELETE sharename
Deletes the user defined share by name. The Samba smbd daemon
immediately notices this change, although it will not disconnect any
users currently connected to the deleted share.
USERSHARE INFO [-l|--long] [wildcard sharename]
Get info on user defined shares owned by the current user matching the
given pattern, or all users.
net usershare info on its own dumps out info on the user defined shares
that were created by the current user, or restricts them to share names
that match the given wildcard pattern ('*' matches one or more
characters, '?' matches only one character). If the '-l' or '--long'
option is also given, it prints out info on user defined shares created
by other users.
The information given about a share looks like: [foobar]
path=/home/jeremy comment=testme usershare_acl=Everyone:F guest_ok=n
And is a list of the current settings of the user defined share that
can be modified by the "net usershare add" command.
USERSHARE LIST [-l|--long] wildcard sharename
List all the user defined shares owned by the current user matching the
given pattern, or all users.
net usershare list on its own list out the names of the user defined
shares that were created by the current user, or restricts the list to
share names that match the given wildcard pattern ('*' matches one or
more characters, '?' matches only one character). If the '-l' or
'--long' option is also given, it includes the names of user defined
shares created by other users.
CONF
Starting with version 3.2.0, a Samba server can be configured by data
stored in registry. This configuration data can be edited with the new
"net conf" commands.
The deployment of this configuration data can be activated in two
levels from the smb.conf file: Share definitions from registry are
activated by setting registry shares to "yes" in the [global] section
and global configuration options are activated by setting include =
registry in the [global] section for a mixed configuration or by
setting config backend = registry in the [global] section for a
registry-only configuration. See the smb.conf(5) manpage for details.
The conf commands are:
net conf list - Dump the complete configuration in smb.conf like
format.
net conf import - Import configuration from file in smb.conf
format.
net conf listshares - List the registry shares.
net conf drop - Delete the complete configuration from registry.
net conf showshare - Show the definition of a registry share.
net conf addshare - Create a new registry share.
net conf delshare - Delete a registry share.
net conf setparm - Store a parameter.
net conf getparm - Retrieve the value of a parameter.
net conf delparm - Delete a parameter.
net conf getincludes - Show the includes of a share definition.
net conf setincludes - Set includes for a share.
net conf delincludes - Delete includes from a share definition.
CONF LIST
Print the configuration data stored in the registry in a smb.conf-like
format to standard output.
CONF IMPORT [--test|-T] filename [section]
This command imports configuration from a file in smb.conf format. If a
section encountered in the input file is present in registry, its
contents is replaced. Sections of registry configuration that have no
counterpart in the input file are not affected. If you want to delete
these, you will have to use the "net conf drop" or "net conf delshare"
commands. Optionally, a section may be specified to restrict the effect
of the import command to that specific section. A test mode is enabled
by specifying the parameter "-T" on the commandline. In test mode, no
changes are made to the registry, and the resulting configuration is
printed to standard output instead.
CONF LISTSHARES
List the names of the shares defined in registry.
CONF DROP
Delete the complete configuration data from registry.
CONF SHOWSHARE sharename
Show the definition of the share or section specified. It is valid to
specify "global" as sharename to retrieve the global configuration
options from registry.
CONF ADDSHARE sharename path [writeable={y|N} [guest_ok={y|N} [comment]]]
Create a new share definition in registry. The sharename and path have
to be given. The share name may not be "global". Optionally, values for
the very common options "writeable", "guest ok" and a "comment" may be
specified. The same result may be obtained by a sequence of "net conf
setparm" commands.
CONF DELSHARE sharename
Delete a share definition from registry.
CONF SETPARM section parameter value
Store a parameter in registry. The section may be global or a
sharename. The section is created if it does not exist yet.
CONF GETPARM section parameter
Show a parameter stored in registry.
CONF DELPARM section parameter
Delete a parameter stored in registry.
CONF GETINCLUDES section
Get the list of includes for the provided section (global or share).
Note that due to the nature of the registry database and the nature of
include directives, the includes need special treatment: Parameters are
stored in registry by the parameter name as valuename, so there is only
ever one instance of a parameter per share. Also, a specific order like
in a text file is not guaranteed. For all real parameters, this is
perfectly ok, but the include directive is rather a meta parameter, for
which, in the smb.conf text file, the place where it is specified
between the other parameters is very important. This can not be
achieved by the simple registry smbconf data model, so there is one
ordered list of includes per share, and this list is evaluated after
all the parameters of the share.
Further note that currently, only files can be included from registry
configuration. In the future, there will be the ability to include
configuration data from other registry keys.
CONF SETINCLUDES section [filename]+
Set the list of includes for the provided section (global or share) to
the given list of one or more filenames. The filenames may contain the
usual smb.conf macros like %I.
CONF DELINCLUDES section
Delete the list of includes from the provided section (global or
share).
EVENTLOG
Starting with version 3.4.0 net can read, dump, import and export
native win32 eventlog files (usually *.evt). evt files are used by the
native Windows eventviewer tools.
The import and export of evt files can only succeed when eventlog list
is used in smb.conf file. See the smb.conf(5) manpage for details.
The eventlog commands are:
net eventlog dump - Dump a eventlog *.evt file on the screen.
net eventlog import - Import a eventlog *.evt into the samba
internal tdb based representation of eventlogs.
net eventlog export - Export the samba internal tdb based
representation of eventlogs into an eventlog *.evt file.
EVENTLOG DUMP filename
Prints a eventlog *.evt file to standard output.
EVENTLOG IMPORT filename eventlog
Imports a eventlog *.evt file defined by filename into the samba
internal tdb representation of eventlog defined by eventlog. eventlog
needs to part of the eventlog list defined in smb.conf. See the
smb.conf(5) manpage for details.
EVENTLOG EXPORT filename eventlog
Exports the samba internal tdb representation of eventlog defined by
eventlog to a eventlog *.evt file defined by filename. eventlog needs
to part of the eventlog list defined in smb.conf. See the smb.conf(5)
manpage for details.
DOM
Starting with version 3.2.0 Samba has support for remote join and
unjoin APIs, both client and server-side. Windows supports remote join
capabilities since Windows 2000.
In order for Samba to be joined or unjoined remotely an account must be
used that is either member of the Domain Admins group, a member of the
local Administrators group or a user that is granted the
SeMachineAccountPrivilege privilege.
The client side support for remote join is implemented in the net dom
commands which are:
net dom join - Join a remote computer into a domain.
net dom unjoin - Unjoin a remote computer from a domain.
net dom renamecomputer - Renames a remote computer joined to a
domain.
DOM JOIN domain=DOMAIN ou=OU account=ACCOUNT password=PASSWORD reboot
Joins a computer into a domain. This command supports the following
additional parameters:
o DOMAIN can be a NetBIOS domain name (also known as short domain
name) or a DNS domain name for Active Directory Domains. As in
Windows, it is also possible to control which Domain Controller to
use. This can be achieved by appending the DC name using the \
separator character. Example: MYDOM\MYDC. The DOMAIN parameter
cannot be NULL.
o OU can be set to a RFC 1779 LDAP DN, like
ou=mymachines,cn=Users,dc=example,dc=com in order to create the
machine account in a non-default LDAP containter. This optional
parameter is only supported when joining Active Directory Domains.
o ACCOUNT defines a domain account that will be used to join the
machine to the domain. This domain account needs to have sufficient
privileges to join machines.
o PASSWORD defines the password for the domain account defined with
ACCOUNT.
o REBOOT is an optional parameter that can be set to reboot the
remote machine after successful join to the domain.
Note that you also need to use standard net parameters to connect and
authenticate to the remote machine that you want to join. These
additional parameters include: -S computer and -U user.
Example: net dom join -S xp -U XP\\administrator%secret domain=MYDOM
account=MYDOM\\administrator password=topsecret reboot.
This example would connect to a computer named XP as the local
administrator using password secret, and join the computer into a
domain called MYDOM using the MYDOM domain administrator account and
password topsecret. After successful join, the computer would reboot.
DOM UNJOIN account=ACCOUNT password=PASSWORD reboot
Unjoins a computer from a domain. This command supports the following
additional parameters:
o ACCOUNT defines a domain account that will be used to unjoin the
machine from the domain. This domain account needs to have
sufficient privileges to unjoin machines.
o PASSWORD defines the password for the domain account defined with
ACCOUNT.
o REBOOT is an optional parameter that can be set to reboot the
remote machine after successful unjoin from the domain.
Note that you also need to use standard net parameters to connect and
authenticate to the remote machine that you want to unjoin. These
additional parameters include: -S computer and -U user.
Example: net dom unjoin -S xp -U XP\\administrator%secret
account=MYDOM\\administrator password=topsecret reboot.
This example would connect to a computer named XP as the local
administrator using password secret, and unjoin the computer from the
domain using the MYDOM domain administrator account and password
topsecret. After successful unjoin, the computer would reboot.
DOM RENAMECOMPUTER newname=NEWNAME account=ACCOUNT password=PASSWORD reboot
Renames a computer that is joined to a domain. This command supports
the following additional parameters:
o NEWNAME defines the new name of the machine in the domain.
o ACCOUNT defines a domain account that will be used to rename the
machine in the domain. This domain account needs to have sufficient
privileges to rename machines.
o PASSWORD defines the password for the domain account defined with
ACCOUNT.
o REBOOT is an optional parameter that can be set to reboot the
remote machine after successful rename in the domain.
Note that you also need to use standard net parameters to connect and
authenticate to the remote machine that you want to rename in the
domain. These additional parameters include: -S computer and -U user.
Example: net dom renamecomputer -S xp -U XP\\administrator%secret
newname=XPNEW account=MYDOM\\administrator password=topsecret reboot.
This example would connect to a computer named XP as the local
administrator using password secret, and rename the joined computer to
XPNEW using the MYDOM domain administrator account and password
topsecret. After successful rename, the computer would reboot.
G_LOCK
Manage global locks.
G_LOCK DO lockname timeout command
Execute a shell command under a global lock. This might be useful to
define the order in which several shell commands will be executed. The
locking information is stored in a file called g_lock.tdb. In setups
with CTDB running, the locking information will be available on all
cluster nodes.
o LOCKNAME defines the name of the global lock.
o TIMEOUT defines the timeout.
o COMMAND defines the shell command to execute.
G_LOCK LOCKS
Print a list of all currently existing locknames.
G_LOCK DUMP lockname
Dump the locking table of a certain global lock.
HELP [COMMAND]
Gives usage information for the specified command.
VERSION
This man page is complete for version 3 of the Samba suite.
AUTHOR
The original Samba software and related utilities were created by
Andrew Tridgell. Samba is now developed by the Samba Team as an Open
Source project similar to the way the Linux kernel is developed.
The net manpage was written by Jelmer Vernooij.