Man Linux: Main Page and Category List


       ibsysstat - system status on an InfiniBand address


       ibsysstat  [-d(ebug)] [-e(rr_show)] [-v(erbose)] [-G(uid)] [-C ca_name]
       [-P ca_port] [-s smlid] [-t(imeout) timeout_ms] [-V(ersion)]  [-o  oui]
       [-S(erver)] [-h(elp)] <dest lid | guid> [<op>]


       ibsysstat  uses  vendor  mads to validate connectivity between IB nodes
       and obtain other information about the IB node.  ibsysstat  is  run  as
       client/server. Default is to run as client.


       Current supported operations:
               ping - verify connectivity to server (default)
               host - obtain host information from server
               cpu  - obtain cpu information from server

       -o, --oui
              use specified OUI number to multiplex vendor mads

       -S, --Server
              start in server mode (do not return)


       Most OpenIB diagnostics take the following common flags. The exact list
       of supported flags per utility can be found in the  usage  message  and
       can be shown using the util_name -h syntax.

       # Debugging flags

       -d      raise the IB debugging level.
               May be used several times (-ddd or -d -d -d).

       -e      show send and receive errors (timeouts and others)

       -h      show the usage message

       -v      increase the application verbosity level.
               May be used several times (-vv or -v -v -v)

       -V      show the version info.

       # Addressing flags

       -G       use GUID address argument. In most cases, it is the Port GUID.

       -s <smlid>      use ’smlid’ as the target lid for SM/SA queries.

       # Other common flags:

       -C <ca_name>    use the specified ca_name.

       -P <ca_port>    use the specified ca_port.

       -t <timeout_ms> override the default timeout for the solicited mads.

       Multiple CA/Multiple Port Support

       When no IB device or port is specified, the port to use is selected  by
       the following criteria:

       1. the first port that is ACTIVE.

       2. if not found, the first port that is UP (physical link up).

       If a port and/or CA name is specified, the user request is attempted to
       be fulfilled, and will fail if it is not possible.


       Hal Rosenstock