NAME
fstrace_dump - Dumps a trace log
SYNOPSIS
fstrace dump [-set <set name>+] [-follow <log name>]
[-file <output filename>] [-sleep <seconds between reads>]
[-help]
fstrace d [-se <set name>+] [-fo <log name>]
[-fi <output filename>] [-sl <seconds between reads>]
[-h]
DESCRIPTION
The fstrace dump command displays the current contents of the "cmfx"
trace log on the standard output stream or writes it to the file named
by the -file argument.
To write the log continuously to the standard output stream or to a
file, use the -follow argument. By default, the log’s contents are
written out every ten seconds and then automatically cleared. To change
the interval between writes, use the -sleep argument.
CAUTIONS
This command produces output only if the "cm" event set is active. To
display or set the event set’s state, use the fstrace lsset or fstrace
setset command respectively.
To make the output from this command maximally readable, the message
catalog file called afszcm.cat must reside in the local /etc/openafs/C
directory. If necessary, copy the file to that directory from the AFS
Binary Distribution before activating tracing.
When the "cm" event set is active, a defined amount of kernel memory
(by default, 60 KB) is allocated for the "cmfx" trace log. As described
in fstrace(8), when the buffer is full, messages are overwritten in a
circular fashion (new messages overwrite the oldest ones). To allocate
more kernel memory for the log, use the fstrace setlog command; to
display the log buffer’s current size, use the fstrace lslog command
with the -long argument.
OPTIONS
-set <set name>+
Names the event set for which to write out the associated trace
log. The only acceptable value is "cm" (for which the associated
trace log is "cmfx"). Provide either this argument or the -log
argument, or omit both to write out the "cmfx" log by default.
-follow <log name>
Names the trace log to write out continuously at a specified
interval (by default, every ten seconds; use the -sleep argument to
change the interval). The log is cleared after each write
operation.
The only acceptable value is "cmfx". Provide either this argument
or the -set argument, or omit both to write out the "cmfx" log by
default.
-file <output filename>
Specifies the pathname of the file to which to write the trace
log’s contents. It can be in AFS or on the local disk. Partial
pathnames are interpreted relative to the current working
directory. If this argument is omitted, the trace log appears on
the standard output stream.
-sleep <seconds between reads>
Sets the number of seconds between writes of the trace log’s
contents when it is dumped continuously. Provide the -follow
argument along with this one. If this argument is omitted, the
default interval is ten seconds.
-help
Prints the online help for this command. All other valid options
are ignored.
OUTPUT
The output begins with a header specifying the date and time at which
the write operation began. If the -follow argument is not included, the
header also reports the number of logs being dumped; it is always 1,
since there is only the "cmfx" trace log. The format of the header is
as follows:
AFS Trace Dump -
Date: I<starting_timestamp>
Found 1 logs.
Contents of log cmfx:
Each subsequent message describes a Cache Manager operation in the
following format:
time <timestamp>, pid <pid>:<event_message>
where
<timestamp>
Specifies the time at which the Cache Manager performed the
operation, as the number of seconds since the dump began.
<pid>
Specifies the process ID of the process or thread associated with
the message.
<event_message>
Is the message itself. They are generally meaningful only to
someone familiar with the AFS source code.
In addition, every 1024 seconds the fstrace command interpreter writes
a message that records the current clock time, in the following format:
time <timestamp>, pid <pid>: Current time: <unix_time>
where
<timestamp>
Is the number of seconds from the start of trace logging.
<pid>
Is the process ID number.
<unix_time>
Is the machine’s clock time, represent in the standard UNIX time
format as the number of seconds since midnight on January 1, 1970.
Use this message to determine the actual clock time associated with
each log message. Determine the actual time as follows:
· Locate the message of interest.
· Search backward through the trace file for the closest current time
message.
· If the current time message’s timestamp is smaller than the log
message’s timestamp, subtract former from the latter. If the
current time message’s timestamp is larger than the log message’s
timestamp, add 1024 to the latter and subtract the former from the
result.
· Add the resulting number to the current time message’s <unix_time>
to determine the log message’s actual time.
If any of the data in the kernel trace buffer has been overwritten
since tracing was activated, the following message appears at the
appropriate place in the output:
Log wrapped; data missing.
To reduce the likelihood of overwriting, use the fstrace setlog
command to increase the kernel buffer’s size. To display the
current defined buffer size, use the fstrace lslog command with the
-long argument.
The following message at the end of the log dump indicates that it
is completed:
AFS Trace Dump - Completed
EXAMPLES
The following command dumps the log associated with the cm event set to
the standard output stream.
# fstrace dump -set cm
AFS Trace Dump -
Date: Tue Apr 7 10:54:57 1998
Found 1 logs.
time 32.965783, pid 0: Tue Apr 7 10:45:52 1998
time 32.965783, pid 33657: Close 0x5c39ed8 flags 0x20
time 32.965897, pid 33657: Gn_close vp 0x5c39ed8 flags 0x20 (returns 0x0)
time 35.159854, pid 10891: Breaking callback for 5bd95e4 states 1024 (volume 0)
time 35.407081, pid 10891: Breaking callback for 5c0fadc states 1024 (volume 0)
.
.
.
time 71.440456, pid 33658: Lookup adp 0x5bbdcf0 name g3oCKs \
fid (756 4fb7e:588d240.2ff978a8.6)
time 71.440569, pid 33658: Returning code 2 from 19
time 71.440619, pid 33658: Gn_lookup vp 0x5bbdcf0 name g3oCKs (returns 0x2)
time 71.464989, pid 38267: Gn_open vp 0x5bbd000 flags 0x0 (returns 0x0)
AFS Trace Dump - Completed
The following command dumps the trace log associated with the cm event
set on the local machine to the file "cmfx.dump.file.1", using the
default interval of 10 seconds between successive dumps:
# fstrace dump -follow cmfx -file cmfx.dump.file.1
PRIVILEGE REQUIRED
The issuer must be logged in as the local superuser "root".
SEE ALSO
afszcm.cat(5), fstrace(8), fstrace_lslog(8), fstrace_setlog(8),
fstrace_lsset(8)
COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0.
It was converted from HTML to POD by software written by Chas Williams
and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.