NAME
3c515-diag - setup and diagnostic program for the 3Com 3c515 Ethernet
cards.
SYNOPSIS
3c515-diag [options]
DESCRIPTION
3c515-diag is a program that you can use to diagnose problems with 3Com
3c515 ethercards as well as reconfiguring it.
OPTIONS
These programs follow the usual GNU command line syntax, with long
options starting with two dashes (‘-’). A summary of options is
included below.
-h, --help
Show summary of options.
-V, --version
Show version of program.
-v, --verbose
Verbose mode.
-q, --quiet
Be very unverbose.
-a, --all
Print all registers.
-p, --base-address <port>
Specify port to use. Valid values are: 0x240, 0x280, 0x300,
0x320, 0x340, 0x360
-f, --interface <interface>
Interface number. Valid Options are: 10baseT, 10base2, and 10Mbs
AUI.
-Q, -i, --irq <irq>
Specify new interrupt. Valid values are: 3-5,7,9-15.
-w, --write-EEPROM <values>
Write to the EEPROMS with the specified values.
SEE ALSO
mii-diag(8)
AUTHOR
This manual page was written by Alain Schroeder <alain@debian.org>, for
the Debian GNU/Linux system (but may be used by others).
February 23, 2001