NAME
zcc - The frontend of z88dk
SYSNOPIS
zcc [flags] [files to be compiled/linked]
DESCRIPTION
This manual page documents briefly the z88dk tools. This manual page
was written for the Debian GNU/Linux distribution (but may be used by
others), because the original program does not have a manual page.
Please refer to the z88dk documentation in /usr/share/doc/z88dk-doc for
the complete description of the system. If /usr/share/doc/z88dk-doc
not exists, please install the package z88dk-doc.
The frontend of z88dk is called zcc, it is this that you should call if
you want to do any compilations.
The files can be either C files (.c), preprocessed C files(.i),
compiled C files (.asm), optimised compiled file (.opt) or assembled
files (.obj), any combination of them can be mixed together and the
relevant processed done on them.
Processing of a file list is done on each file in turn (i.e.
preprocess, compile, optimise, assemble) at the end all files may be
linked into a single executable if desired.
OPTIONS
Options to control the action of the frontend:
+[file]
Name of alternate config file (must be the first argument).
Predefined alternate configs:
abc80 ABC80
aceansi Jupiter ACE, using VT-ANSI engine
cpm CP/M
msx MSX 1
mz Sharp MZ
mzansi Sharp MZ, using VT-ANSI
nc Amstrad NC100
rex REX 6000
sam Sam Coupe
svi Spectravideo SVI
m5 SORD M5
ti82 Ti82, using ROM text routines
ti82ansi Ti82, using VT-ANSI
ti83 Ti83, using ROM text routines
ti83ansi Ti83, using VT-ANSI
ti85 Ti85, using ROM text routines
ti85ansi Ti85, using VT-ANSI
ti86 Ti86, using ROM text routines
ti86ansi Ti86, using VT-ANSI
ti8x Ti83+, using ROM text routines
[ti8xansi] Ti83+, using VT-ANSI
vz VZ / Laser 200
vzansi VZ / Laser 200, using VT-ANSI
z88 Cambridge Z88
z88ansi Cambridge Z88, using VT-ANSI
z88net Cambridge Z88 with TCP/IP
zx ZX Spectrum
zx81 ZX 81
zx81ansi ZX 81, using VT-ANSI
zxansi ZX Spectrum, using VT-ANSI
-a Produce .asm (or .opt) file only
-c Do not link object files
-E Preprocess files only, leave output in .i file
-o [file]
Specify output file for binary (default is a.bas for BASIC
programs and a.bin for application binaries)
-On Optimize compiler output (to .opt file) n can be either 0 (none)
1,2,3, level 2 is recommended. Level 3 is suitable for large
programs (includes certain lib functions to reduce size of
code(!))
-v Verbose - echo commands as they are executed
-vn Don’t be verbose
Options to control library usage:
-l[name]
Link in a library - supply just the name (after placing them in
the correct directory).
The ’name’ are:
farz88 Z88 far support
gfx Z88 BASIC graphics lib
gfxapp Z88 application graphics lib
m Generic math routines
malloc Generic near malloc routine
mz OZ’s math routines
ndos Fake file-routines, return errors only
net Z88 socket routines for ZSock
netdev Z88 socket routines for devices
p3 +3 file support library
tigray82 Ti82 graylib routines
tigray83 Ti83 graylib routines
tigray83p Ti83+ graylib routines
tigray85 Ti85 graylib routines
tigray86 Ti86 graylib routines
z88 Some Z88 application routines, like mailboxing
zxmath ZX Spectrum ROM based math routines
zxvgs ZXVGS hardware support
-m Generate .map files when assembling/linking
Options to control the type code produced:
-unsigned
Implicitly define everything as unsigned unless explicitly told
otherwise.
-create-app
Create an application image (i.e. bank 63,62 etc)
-make-app
(App) Notify the compiler that you’re trying to make an
application
-reqpag=
(App) Number of 256 byte pages required for bad application
-zorg= (App) Origin for a Z88 application
-safedata=
(App) Amount of safedata required by your code
-defvars=
(App) Where static variables should be dropped (only valid for
single file compilations, but see later)
-expandz88
(App) Expanded z88 required -no-expandz88 (App) Expanded z88 not
required (these two flags toggle some startup code to check for
an expanded machine)
-startup=3
Produce standalone code that can be run from a set address from
BASIC. Use -zorg= to change the address
-R (Use with above) produces relocatable code that can be loaded
into a DIM’d BASIC array.
-smartpf
Intelligent printf routine handling
-no-smartpf
Turn off the intelligent printf handling
-make-lib
Shortcut to generate .o files from library .c files
-stackoffset
Sets the stack offset for shared libs (see package.txt for
details)
Miscellaneous options:
-z80-verb
Allow z80asm to be verbose, this tends to generate a lot of
output to the screen so may not be desired.
-cc Intersperse C code as comments in the assembler output, warning:
this *will* clobber some optimizations.
-Wall Turn on all the compiler warnings
-Wnone Turn off all compiler warnings
-Wn[num]
Turn off the compiler warning [num]
-W[num]
Turn on the compiler warning [num]
-asxx Cause the compiler to emit asxx compatible code
-Cp[option]
Pass an option through to the pre-processor
-Ca[option]
Pass an option through to the assembler
In addition, the flags, -D, -I, -U are passed through to the
preprocessor.
SEE ALSO
z88dk(1), z88dk-zcc(1), z88dk-z80asm(1), z88dk-appmake(1), z88dk-
copt(1).
AUTHOR
z88dk was written by Dominic Morris <dom@z88dk.org>, and others. This
manual page was written by Krystian Wlosek <tygrys@waw.pdi.net> using
exists documentation, for the Debian GNU/Linux system.
01 December 2009 zcc(1)