NAME
xli - load images into an X11 window or onto the root window
SYNOPSIS
xli [global_options] {[image_options] image ...}
xli [global_options] [image_options] stdin < image
DESCRIPTION
xli displays images in an X11 window or loads them onto the root
window. See the IMAGE TYPES section below for supported image types.
If the filename stdin is given, xli will read the image from standard
input.
If the destination display cannot support the number of colors in the
image, the image will be dithered (monochrome destination) or have its
colormap reduced (color destination) as appropriate. This can also be
done forcibly with the -halftone, -dither, and -colors options.
A variety of image manipulations can be specified, including gamma
correction, brightening, clipping, dithering, depth-reduction,
rotation, and zooming. Most of these manipulations have simple
implementations; speed was opted for above accuracy.
If you are viewing a large image in a window, the initial window will
be at most 90% of the size of the display unless the window manager
does not correctly handle window size requests or if you’ve used the
-fullscreen or -fillscreen options. You may move the image around in
the window by dragging with the first mouse button. The cursor will
indicate which directions you may drag, if any.
When the keyboard focus is in the window you can:
Type ’q’ or ’^C’ to exit xli.
Type space, ’n’ or ’f’ to move to the next image in the list.
Type ’b’ or ’p’ to move to the previous image in the list.
Type . to reload the image.
Type l to rotate the image anti-clockwise.
Type r to rotate the image clockwise.
Type 0 to set the images assumed gamma to your display gamma
(usually darkens images)
Type 1 to set the images assumed gamma to 1.0
(usually lightens images)
Type 5-2 to lighten the image (5 in small steps, up to 2 in large steps)
Type 6-9 to darken the image (6 in small steps, up to 9 in large steps)
Type > resp. < to zoom in resp. out
A wide variety of common image manipulations can be done by mixing and
matching the available options. See the section entitled HINTS FOR
GOOD IMAGE DISPLAYS for some ideas.
RESOURCE CLASS
xli uses the resource class name _XSETROOT_Id for window managers which
need this resource set.
GLOBAL OPTIONS
The following options affect the global operation of xli. They may be
specified anywhere on the command line.
-default
Set the root background to the default root weave. This is the
same as xsetroot with no arguments.
-debug Talk to the X server in synchronous mode. This is useful for
debugging. If an X error is seen while in this mode, a core
will be dumped.
-dumpcore
Signals will not be trapped, and instead a coredump will occur.
-display display_name
X11 display name to send the image(s) to.
-dispgamma Display_gamma
Specify the gamma correction value appropriate for the display
device. This overrides the value read from the environment
variable DISPLAY_GAMMA, or the default value of 2.2, which is
approximately correct for many displays. A value of between 1.6
and 2.8 is reasonable. If individual images are too bright or
dark, use the -gamma option.
There is an image provided with xli called ’chkgamma.jpg’ that lets you
set the display gamma reasonably accurately. This file contains two
grayscale ramps. The ramps are chosen to look linear to the human eye,
one using continuous tones, and the other using dithering. When the
display gamma is correct, then the two ramps should look symmetrical,
and the point at which they look equally bright should be almost
exactly half way from the top to the bottom. (To find this point it
helps if you move away a little from the screen, and de-focus your eyes
a bit.)
If the equal brightness point is above center increase the gamma, and
decrease it if it is below the center. The value will usually be around
2.2 Once you’ve got it right, you can set the DISPLAY_GAMMA environment
variable in your .profile
-fillscreen
Use the whole screen for displaying an image. The image will be
zoomed so that it just fits the size of the screen. If -onroot
is also specified, it will be zoomed to completely fill the
screen.
-fit Force image to use the default visual and colormap. This is
useful if you do not want technicolor effects when the colormap
focus is inside the image window, but it may reduce the quality
of the displayed image. This is on by default if -onroot or
-windowid is specified.
-forall
Apply -fillscreen and -fullscreen options to all images and not
just the first.
-fork Fork xli. This causes xli to disassociate itself from the
shell. This option automatically turns on -quiet.
-fullscreen
Use the whole screen for displaying an image. The image will be
surrounded by a border if it is smaller than the screen. If
-onroot is also specified, the image will be zoomed so that it
just fits the size of the screen.
-geometry WxH[{+-X}{+-}Y]
This sets the size of the window onto which the images are
loaded to a different value than the size of the image. When
viewing an image in a window, this can be used to set the size
and position of the viewing window. If the size is not
specified in the geometry, (or is set to 0), then the size will
be chosen to be small enough to able to fit the window in the
screen (as usual).
-goto image_name
When the end of the list of images is reached, go to image
image_name. This is useful for generating looped slideshows.
If more than one image of the same name as the target exists on
the argument list, the first in the argument list is used.
-help [option ...]
Give information on an option or list of options. If no option
is given, a simple interactive help facility is invoked.
-identify
Identify the supplied images rather than display them.
-install
Forcibly install the images colormap when the window is focused.
This violates ICCCM standards and only exists to allow operation
with naive window managers. Use this option only if your window
manager does not install colormaps properly.
-list List the images which are along the image path.
-onroot
Load image(s) onto the root window instead of viewing in a
window. This option automatically sets the -fit option. This
is the opposite of -view. If used in conjunction with
-fullscreen, the image will be zoomed to just fit. If used with
-fillscreen, the image will be zoomed to completely fill the
screen. -border, -at, and -center also affect the results.
-path Displays the image path and image suffixes which will be used
when looking for images. These are loaded from ~/.xlirc and
optionally from a system wide file (normally /usr/lib/xlirc).
-pixmap
Force the use of a pixmap as backing-store. This is provided
for servers where backing-store is broken (such as some versions
of the AIXWindows server). It may improve scrolling performance
on servers which provide backing-store.
-private
Force the use of a private colormap. Normally colors are
allocated shared unless there are not enough colors available.
-quiet Forces xli and xview to be quiet.
-supported
List the supported image types.
-verbose
Causes xli to be talkative, telling you what kind of image it’s
playing with and any special processing that it has to do. This
is the default for xview and xli.
-version
Print the version number and patchlevel of this version of xli.
-view View image(s) in a window. This is the opposite of -onroot and
the default for xview and xli.
-visual visual_name
Force the use of a specific visual type to display an image.
Normally xli tries to pick the best available image for a
particular image type. The available visual types are:
DirectColor, TrueColor, PseudoColor, StaticColor, GrayScale, and
StaticGray. Nonconflicting names may be abbreviated and case is
ignored.
-windowid hex_window_id
Sets the background pixmap of a particular window ID. The
argument must be in hexadecimal and must be preceded by "0x" (eg
-windowid 0x40000b. This is intended for setting the background
pixmap of some servers which use untagged virtual roots (eg
HP-VUE), but can have other interesting applications.
PERSISTENT IMAGE OPTIONS
The following options may precede each image. They take effect from
the next image, and continue until overridden or canceled with
-newoptions.
-border color
This sets the background portion of the window or clipped image
which is not covered by any images to be color.
-brighten percentage
Specify a percentage multiplier for a color images colormap. A
value of more than 100 will brighten an image, one of less than
100 will darken it.
-colors n
Specify the maximum number of colors to use in the image. This
is a way to forcibly reduce the depth of an image.
-cdither
-colordither
Dither the image with a Floyd-Steinberg dither if the number of
colors is reduced. This will be slow, but will give a better
looking result with a restricted color set. -cdither and
-colordither are equivalent.
-delay secs
Sets xli to automatically advance to the following image, secs
seconds after the next image file is displayed.
-dither
Dither a color image to monochrome using a Floyd-Steinberg
dithering algorithm. This happens by default when viewing color
images on a monochrome display. This is slower than -halftone
and affects the image accuracy but usually looks much better.
-gamma Image_gamma
Specify the gamma of the display the image was intended to be
displayed on. Images seem to come in two flavors: 1) linear
color images, produced by ray tracers, scanners etc. These sort
of images generally look too dark when displayed directly to a
CRT display. 2) Images that have been processed to look right on
a typical CRT display without any sort of processing. These
images have been ’gamma corrected’. By default, xli assumes that
8 bit images have been gamma corrected and need no other
processing. 24 bit images are assumed to be linear. If a linear
image is displayed as if it is gamma corrected it will look too
dark, and a gamma value of 1.0 should be specified, so that xli
can correct the image for the CRT display device. If a gamma
corrected image is displayed as if it were a linear image, then
it will look too light, and a gamma value of (approximately) 2.2
should be specified for that image. Some formats (RLE) allow
the image gamma to be embedded as a comment in the file itself,
and the -gamma option allows overriding of the file comment. In
general, values smaller than 2.2 will lighten the image, and
values greater than 2.2 will darken the image. In general this
will work better than the -brighten option.
-gray Convert an image to grayscale. This is very useful when
displaying colorful images on servers with limited color
capability. The optional spelling -grey may also be used.
-idelay secs
Set the delay to be used for this image to secs seconds (see
-delay). If -delay was specified, this overrides it. If it was
not specified, this sets the automatic advance delay for this
image while others will wait for the user to advance them.
-smooth
Smooth a color image. This reduces blockiness after zooming an
image up. If used on a monochrome image, nothing happens. This
option can take awhile to perform, especially on large images.
You may specify more than one -smooth option per image, causing
multiple iterations of the smoothing algorithm.
-title window_title
Set the titlebar of the window used to display the image. This
will override any title that is read from the image file. The
title will also be used for the icon name.
-xpm color_context_key
Select the preferred xpm colour map. XPM files may contain more
than one color mapping, each mapping being appropriate for a
particular visual. Normally xli will select an appropriate
color mapping from that supported by the XPM file by checking on
the default X visual class and depth. This option allows the
user to override this choice. Legal values of
color_context_key are: m, g4, g and c. m = mono, g4 = 4 level
gray, g = gray, c = color ).
-xzoom percentage
Zoom the X axis of an image by percentage. A number greater
than 100 will expand the image, one smaller will compress it. A
zero value will be ignored. This option, and the related -yzoom
are useful for correcting the aspect ratio of images to be
displayed.
-yzoom percentage
Zoom the Y axis of an image by percentage. See -xzoom for more
information.
-zoom percentage
Zoom both the X and Y axes by percentage. See -xzoom for more
information. Technically the percentage actually zoomed is the
square of the number supplied since the zoom is to both axes,
but I opted for consistency instead of accuracy.
-zoom auto
Zoom large images to fit the screen; don’t zoom small images.
-newoptions
Reset options that propagate. The -bright, -colors,
-colordither, -delay, -dither, -gamma, -gray, -normalize,
-smooth, -xzoom, -yzoom, and -zoom options normally propagate to
all following images.
LOCAL IMAGE OPTIONS
The following options may precede each image. These options are local
to the image they precede.
-at X,Y
Indicates coordinates to load the image at X,Y on the base
image. If this is an option to the first image, and the -onroot
option is specified, the image will be loaded at the given
location on the display background.
-background color
Use color as the background color instead of the default
(usually white but this depends on the image type) if you are
transferring a monochrome image to a color display.
-center
Center the image on the base image loaded. If this is an option
to the first image, and the -onroot option is specified, the
image will be centered on the display background.
-clip X,Y,W,H
Clip the image before loading it. X and Y define the upper-left
corner of the clip area, and W and H define the extents of the
area. A zero value for W or H will be interpreted as the
remainder of the image. Note that X and Y may be negative, and
that W and H may be larger than the image. This causes a border
to be placed around the image. The border color may be set with
the -border option.
-expand
Forces the image (after all other optional processing) to be
expanded into a True Color (24 bit) image. This is useful on
systems which support 24 bit color, but where xli might choose
to load a bitmap or 8 bit image into one of the other smaller
depth visuals supported on your system.
-foreground color
Use color as the foreground color instead of black if you are
transferring a monochrome image to a color display. This can
also be used to invert the foreground and background colors of a
monochrome image.
-halftone
Force halftone dithering of a color image when displaying on a
monochrome display. This option is ignored on monochrome
images. This dithering algorithm blows an image up by sixteen
times; if you don’t like this, the -dither option will not blow
the image up but will take longer to process and will be less
accurate.
-invert
Inverts a monochrome image. This is shorthand for -foreground
white -background black.
-merge Merge this image onto the base image after local processing.
The base image is considered to be the first image specified or
the last image that was not preceded by -merge. If used in
conjunction with -at and -clip, very complex images can be built
up. Note that the final image will be the size of the first
image, and that subsequent merged images overlay previous
images. The final image size can be altered by using the -clip
option on the base image to make it bigger or smaller. This
option is on by default for all images if the -onroot or
-windowid options are specified.
-name image_name
Force the next argument to be treated as an image name. This is
useful if the name of the image is -dither, for instance.
-normalize
Normalize a color image.
-rotate degrees
Rotate the image by degrees clockwise. The number must be a
multiple of 90.
EXAMPLES
To load the rasterfile "my.image" onto the background and replicate it
to fill the entire background:
xli -onroot my.image
To load a monochrome image "my.image" onto the background, using red as
the foreground color, replicate the image, and overlay "another.image"
onto it at coordinate (10,10):
xli -foreground red my.image -at 10,10 another.image
To center the rectangular region from 10 to 110 along the X axis and
from 10 to the height of the image along the Y axis:
xli -center -clip 10,10,100,0 my.image
To double the size of an image:
xli -zoom 200 my.image
To halve the size of an image:
xli -zoom 50 my.image
To brighten a dark image:
xli -brighten 150 my.image
To darken a bright image:
xli -brighten 50 my.image
HINTS FOR GOOD IMAGE DISPLAYS
Since images are likely to come from a variety of sources, they may be
in a variety of aspect ratios which may not be supported by your
display. The -xzoom and -yzoom options can be used to change the
aspect ratio of an image before display. If you use these options, it
is recommended that you increase the size of one of the dimensions
instead of shrinking the other, since shrinking looses detail. For
instance, many GIF and G3 FAX images have an X:Y ratio of about 2:1.
You can correct this for viewing on a 1:1 display with either -xzoom 50
or -yzoom 200 (reduce X axis to 50% of its size and expand Y axis to
200% of its size, respectively) but the latter should be used so no
detail is lost in the conversion.
When zooming color images up you can reduce blockiness with -smooth.
For zooms of 300% or more, I recommend two smoothing passes (although
this can take awhile to do on slow machines). There will be a
noticeable improvement in the image.
You can perform image processing on a small portion of an image by
loading the image more than once and using the -merge, -at and -clip
options. Load the image, then merge it with a clipped, processed
version of itself. To brighten a 100x100 rectangular portion of an
image located at (50,50), for instance, you could type:
xli my.image -merge -at 50,50 -clip 50,50,100,100 -brighten 150
my.image
If you’re using a display with a small colormap to display colorful
images, try using the -gray option to convert to grayscale.
XLITO
xlito (XLoadImageTrailingOptions) is a separate utility that provides a
file format independent way of marking image files with the appropriate
options to display correctly. It does this by appending to file a
string specified by the user, marked with some magic numbers so that
this string can be extracted by a program that knows where to look.
Since almost all image files have some sort of image size specifier,
the programs that load or manipulate these files do not look beyond the
point at which they have read the image, so trailing information can
safely be appended to the file. If appending this information causes
trouble with other utilities, it can simply be deleted.
xli will recognize these trailing options at the end of the image
files, and will treat the embedded string as if it were a sequence of
command line IMAGE OPTIONS. Any GLOBAL OPTIONS will be ignored, and the
IMAGE OPTIONS are never propagated to other images.
Trailing options can be examined with:
xlito image_file ...
Changed or added with:
xlito -c "string of options" image_file
And deleted with:
xlito -d image_file ...
For example, if you have a gif file fred.gif which is too dark and is
the wrong aspect ratio, then it may need to be viewed with:
xli -yzoom 130 -gamma 1.0 fred.gif
to get it to look OK. These options can then be appended to the file
by:
xlito -c "-yzoom 130 -gamma 1.0" fred.gif
and from then on xli will get the appropriate options from the image
file itself. See the xlito manual entry for more details about this
utility.
PATHS AND EXTENSIONS
The file ~/.xlirc (and optionally a system-wide file) defines the path
and default extensions that xli will use when looking for images. This
file can have two statements: "path=" and "extension=" (the equals
signs must follow the word with no spaces between). Everything
following the "path=" keyword will be prepended to the supplied image
name if the supplied name does not specify an existing file. The paths
will be searched in the order they are specified. Everything following
the "extension=" keyword will be appended to the supplied image name if
the supplied name does not specify an existing file. As with paths,
these extensions will be searched in the order they are given.
Comments are any portion of a line following a hash-mark (#).
The following is a sample ~/.xlirc file:
# paths to look for images in
path= /usr/local/images
/home/usr1/guest/madd/images
/usr/include/X11/bitmaps
# default extensions for images; .Z is automatic; scanned in order
extension= .csun .msun .sun .face .xbm .bm
Versions of xli prior to version 01, patchlevel 03 would load the
system-wide file (if any), followed by the user’s file. This behavior
made it difficult for the user to configure her environment if she
didn’t want the default. Newer versions will ignore the system-wide
file if a personal configuration file exists.
IMAGE TYPES
xli currently supports the following image types:
CMU Window Manager raster files
Faces Project images
Fuzzy Bitmap (.fbm) images
GEM bit images
GIF images (Including GIF89a compatibility)
G3 FAX images
JFIF style jpeg images
McIDAS areafiles
MacPaint images
Windows, OS/2 RLE Image
Monochrome PC Paintbrush (.pcx) images
Photograph on CD Image
Portable Bitmap (.pbm, .pgm, .ppm) images
Sun monochrome rasterfiles
Sun color RGB rasterfiles
Targa (.tga) files
Utah Raster Toolkit (.rle) files
X pixmap (.xpm) files (Version 1, 2C and 3)
X10 bitmap files
X11 bitmap files
X Window Dump (except TrueColor and DirectColor)
Normal, compact, and raw PBM images are supported. Both standard and
run-length encoded Sun rasterfiles are supported. Any image whose name
ends in .Z is assumed to be a compressed image and will be filtered
through "uncompress". If HAVE_GUNZIP is defined in the Makefile.std
make file, then any image whose name ends in .gz or .Z will be filtered
through gunzip.
Any file that looks like a uuencoded file will be decoded
automatically.
AUTHORS
The original Author is:
Jim Frost
Saber Software
jimf@saber.com
Version 1.16 of xli is derived from xloadimage 3.01 has been brought to
you by:
Graeme Gill
graeme@labtam.oz.au
Version 1.17 of xli is derived from xli 1.16 by
smar@reptiles.org
For a more-or-less complete list of other contributors (there are a lot
of them), please see the README file enclosed with the distribution.
FILES
xli - the image loader and viewer
xlito - the trailing options utility
/usr/lib/X11/Xli - default system-wide configuration file
~/.xlirc - user’s personal configuration file
COPYRIGHT
Copyright (c) 1989, 1990, 1991, 1992, 1993 Jim Frost, Graeme Gill and
others.
Xli is copyrighted material with a very loose license allowing
unlimited modification and distribution if the copyright notices are
left intact. Various portions are copyrighted by various people, but
all use a modification of the MIT copyright notice. Please check the
source for complete copyright information. The intent is to keep the
source free, not to stifle its distribution, so please write to me if
you have any questions.
BUGS
Zooming dithered images, especially downwards, is UGLY.
Images can come in a variety of aspect ratios. Xli cannot detect what
aspect ratio the particular image being loaded has, nor the aspect
ratio of the destination display, so images with differing aspect
ratios from the destination display will appear distorted. The
solution to this is to use xlito to append the appropriate options to
the image file. See HINTS FOR GOOD IMAGE DISPLAYS and XLITO for more
information.
The GIF format allows more than one image to be stored in a single GIF
file, but xli will only display the first.
One of the pseudonyms for xli, xview, is the same name as Sun uses for
their SunView-under-X package. This will be confusing if you’re one of
those poor souls who has to use Sun’s XView.
Some window managers do not correctly handle window size requests. In
particular, many versions of the twm window manager use the MaxSize
hint instead of the PSize hint, causing images which are larger than
the screen to display in a window larger than the screen, something
which is normally avoided. Some versions of twm also ignore the
MaxSize argument’s real function, to limit the maximum size of the
window, and allow the window to be resized larger than the image. If
this happens, xli merely places the image in the upper-left corner of
the window and uses the zero-value’ed pixel for any space which is not
covered by the image. This behavior is less-than-graceful but so are
window managers which are cruel enough to ignore such details.
The order in which operations are performed on an image is independent
of the order in which they were specified on the command line.
Wherever possible I tried to order operations in such a way as to look
the best possible (zooming before dithering, for instance) or to
increase speed (zooming downward before compressing, for instance).
Display Gamma should setable in the ~/.xlirc file.
Embedded trailing options override the command line Image Options.
Command line options should really override trailing options.
28 Oct 2002