NAME
udisks - udisks command line tool
SYNOPSIS
udisks [OPTIONS]
DESCRIPTION
udisks is a simple command line client for the udisks(7) system bus
service.
OPTIONS
--dump
Dump all information about all devices. Please include this when
filing bugs.
--enumerate
Lists all object paths of devices know to the daemon.
--enumerate-device-files
Lists all device files of devices know to the daemon.
--monitor
Connect to the daemon and print a line every time an event happens.
--monitor-detail
Like --monitor but prints the full details of the device whenever
an event happens.
--show-info device_file
Shows information about device_file.
--inhibit-polling device_file [-- program arg ...]
Inhibits polling on device_file. If no program is given, polling is
inhibited until Ctrl+C is pressed. Otherwise the program is spawned
and the polling is only inhibited until the program terminates.
--poll-for-media device_file
Polls device_file to perform media detection.
--inhibit-all-polling [-- program arg ...]
Inhibits polling on all devices. If no program is given, polling is
inhibited until Ctrl+C is pressed. Otherwise the program is spawned
and the polling is only inhibited until the program terminates.
--mount device_file [--mount-fstype fstype] [--mount-options options]
Mounts the device represented by device_file using the file system
fstype and a comma-separated list of options.
--unmount device_file [--unmount-options options]
Unmounts the device represented by device_file using a
comma-separated list of options.
--detach device_file [--detach-options options]
Detaches (e.g. powering down the physical port the device is
connected to) the device represented by device_file using a
comma-separated list of options.
--ata-smart-refresh device_file [--ata-smart-wakeup]
Refreshes ATA SMART data for device_file. If the disk is sleeping
it will not be woken up unless --ata-smart-wakeup is passed. will
be used.
--ata-smart-refresh device_file --ata-smart-simulate blob
Read ATA SMART data from blob for device_file. This can only be
done by the super user and is typically used for testing that
clients relying on the ATA SMART data provided by udisks behave
correctly. The libatasmart git repository at
http://git.0pointer.de/?p=libatasmart.git;a=summary contains a
collection of blobs from failing disks.
--inhibit [-- program arg ...]
Inhibits clients from invoking methods on the daemon that require
authorization (all methods will return the
org.freedesktop.UDisks.Error.Inhibited error) if the caller is not
the super user. This is typically used by OS installers and other
programs that expects full control of the system, specifically to
avoid automounting devices. Only the super user can do this.
If no program is given, the daemon is inhibited until Ctrl+C is
pressed. Otherwise the program is spawned and the daemon is only
inhibited until the program terminates.
--set-spindown device_file --spindown-timeout seconds
[-- program arg ...]
Configures disk spindown timeout on device_file to seconds. See the
section called “SPINNING DOWN DISKS” for important information
before using this option.
If no program is given, the spindown time will be used until Ctrl+C
is pressed. Otherwise the program is spawned and the the spindown
timeout will only be used until the program terminates.
--set-spindown-all --spindown-timeout seconds [-- program arg ...]
Configures disk spindown timeout on all disks that can be spun down
to seconds. See the section called “SPINNING DOWN DISKS” for
important information before using this option.
If no program is given, the spindown time will be used until Ctrl+C
is pressed. Otherwise the program is spawned and the the spindown
timeout will only be used until the program terminates.
--help
Show help options.
SPINNING DOWN DISKS
Caution should be exercised when configuring disk spin down timeouts.
Note that every time a disk is spun down, the “start-stop-count” ATA
SMART attribute will increase by 1 and most disks are only good for a
limited number (typically 50,000 but it varies by manufacturer and
model). In addition, the drive may take as long as 30 seconds to
respond to subsequent disk access – most drives are typically faster,
see the “spin-up-time” ATA SMART attribute.
On the other hand, cautious use (e.g. using conservative timeouts) of
the ability to spin down disks, can be a good way to trade power
consumption (typically 8 vs 1 Watts for 3.5" drives) and heat emission
for a slightly higher latency.
AUTHOR
Written by David Zeuthen david@fubar.dk with a lot of help from many
others.
BUGS
Please send bug reports to either the distribution bug tracker or the
upstream bug tracker at
http://bugs.freedesktop.org/enter_bug.cgi?product=udisks.
SEE ALSO
udisks-daemon(8), udisks(7),