NAME
trace-cmd-record - record a trace from the Ftrace Linux internal tracer
SYNOPSIS
trace-cmd record [OPTIONS] [command]
DESCRIPTION
The trace-cmd(1) record command will set up the Ftrace Linux kernel
tracer to record the specified plugins or events that happen while the
command executes. If no command is given, then it will record until the
user hits Ctrl-C.
The record command of trace-cmd will set up the Ftrace tracer to start
tracing the various events or plugins that are given on the command
line. It will then create a number of tracing processes (one per CPU)
that will start recording from the kernel ring buffer straight into
temporary files. When the command is complete (or Ctrl-C is hit) all
the files will be combined into a trace.dat file that can later be read
(see trace-cmd-report(1)).
OPTIONS
-p plugin
Specify a trace plugin. Plugins are special Ftrace tracers that
usually do more than just trace an event. Common plugins are
function, function_graph, preemptirqsoff, irqsoff, preemptoff, and
wakeup. A plugin must be supported by the running kernel. To see a
list of available plugins, see trace-cmd-list(1).
-e event
Specify an event to trace. Various static trace points have been
added to the Linux kernel. They are grouped by subsystem where you
can enable all events of a given subsystem or specify specific
events to be enabled. The event is of the format
"subsystem:event-name". You can also just specify the subsystem
without the :event-name or the event-name without the "subsystem:".
Using "-e sched_switch" will enable the "sched_switch" event where
as, "-e sched" will enable all events under the "sched" subsystem.
The 'event' can also contain glob expressions. That is, "*stat*" will
select all events (or subsystems) that have the characters "stat" in their
names.
The keyword 'all' can be used to enable all events.
-f filter
Specify a filter for the previous event. This must come after a -e.
This will filter what events get recorded based on the content of
the event. Filtering is passed to the kernel directly so what
filtering is allowed may depend on what version of the kernel you
have. Basically, it will let you use C notation to check if an
event should be processed or not.
==, >=, <=, >, <, &, |, && and ||
The above are usually safe to use to compare fields.
-v
This will cause all events specified after it on the command line
to not be traced. This is useful for selecting a subsystem to be
traced but to leave out various events. For Example: "-e sched -v
-e "*stat\*"" will enable all events in the sched subsystem except
those that have "stat" in their names.
Note: the *-v* option was taken from the way grep(1) inverts the following
matches.
-F
This will filter only the executable that is given on the command
line. If no command is given, then it will filter itself (pretty
pointless). Using -F will let you trace only events that are caused
by the given command.
-P pid
Similar to -F but lets you specify a process ID to trace.
-o output-file
By default, trace-cmd report will create a trace.dat file. You can
specify a different file to write to with the -o option.
-l function-name
This will limit the function and function_graph tracers to only
trace the given function name. More than one -l may be specified on
the command line to trace more than one function. The limited use
of glob expressions are also allowed. These are match* to only
filter functions that start with match. *match to only filter
functions that end with match. *match\* to only filter on
functions that contain match.
-g function-name
This option is for the function_graph plugin. It will graph the
given function. That is, it will only trace the function and all
functions that it calls. You can have more than one -g on the
command line.
-n function-name
This has the opposite effect of -l. The function given with the -n
option will not be traced. This takes precedence, that is, if you
include the same function for both -n and -l, it will not be
traced.
-d
Some tracer plugins enable the function tracer by default. Like the
latency tracers. This option prevents the function tracer from
being enabled at start up.
-O option
Ftrace has various options that can be enabled or disabled. This
allows you to set them. Appending the text no to an option disables
it. For example: "-O nograph-time" will disable the "graph-time"
Ftrace option.
-s interval
The processes that trace-cmd creates to record from the ring buffer
need to wake up to do the recording. Setting the interval to zero
will cause the processes to wakeup every time new data is written
into the buffer. But since Ftrace is recording kernel activity, the
act of this processes going back to sleep may cause new events into
the ring buffer which will wake the process back up. This will
needlessly add extra data into the ring buffer.
The 'interval' metric is microseconds. The default is set to 1000 (1 ms).
This is the time each recording process will sleep before waking up to
record any new data that was written to the ring buffer.
-r priority
The priority to run the capture threads at. In a busy system the
trace capturing threads may be staved and events can be lost. This
increases the priority of those threads to the real time (FIFO)
priority. But use this option with care, it can also change the
behaviour of the system being traced.
-b size
This sets the ring buffer size to size kilobytes. Because the
Ftrace ring buffer is per CPU, this size is the size of each per
CPU ring buffer inside the kernel. Using "-b 10000" on a machine
with 4 CPUs will make Ftrace have a total buffer size of 40 Megs.
-N host:port
If another machine is running "trace-cmd listen", this option is
used to have the data sent to that machine with UDP packets.
Instead of writing to an output file, the data is sent off to a
remote box. This is ideal for embedded machines with little
storage, or having a single machine that will keep all the data in
a single repository.
Note: This option is not supported with latency tracer plugins:
wakeup, wakeup_rt, irqsoff, preemptoff and preemptirqsoff
-t
This option is used with -N, when there’s a need to send the live
data with TCP packets instead of UDP. Although TCP is not nearly as
fast as sending the UDP packets, but it may be needed if the
network is not that reliable, the amount of data is not that
intensive, and a guarantee is needed that all traced information is
transfered successfully.
EXAMPLES
The basic way to trace all events:
# trace-cmd record -e all ls > /dev/null
# trace-cmd report
trace-cmd-13541 [003] 106260.693809: filemap_fault: address=0x128122 offset=0xce
trace-cmd-13543 [001] 106260.693809: kmalloc: call_site=81128dd4 ptr=0xffff88003dd83800 bytes_req=768 bytes_alloc=1024 gfp_flags=GFP_KERNEL|GFP_ZERO
ls-13545 [002] 106260.693809: kfree: call_site=810a7abb ptr=0x0
ls-13545 [002] 106260.693818: sys_exit_write: 0x1
To use the function tracer with sched switch tracing:
# trace-cmd record -p function -e sched_switch ls > /dev/null
# trace-cmd report
ls-13587 [002] 106467.860310: function: hrtick_start_fair <-- pick_next_task_fair
ls-13587 [002] 106467.860313: sched_switch: prev_comm=trace-cmd prev_pid=13587 prev_prio=120 prev_state=R ==> next_comm=trace-cmd next_pid=13583 next_prio=120
trace-cmd-13585 [001] 106467.860314: function: native_set_pte_at <-- __do_fault
trace-cmd-13586 [003] 106467.860314: function: up_read <-- do_page_fault
ls-13587 [002] 106467.860317: function: __phys_addr <-- schedule
trace-cmd-13585 [001] 106467.860318: function: _raw_spin_unlock <-- __do_fault
ls-13587 [002] 106467.860320: function: native_load_sp0 <-- __switch_to
trace-cmd-13586 [003] 106467.860322: function: down_read_trylock <-- do_page_fault
Here is a nice way to find what interrupts have the highest latency:
# trace-cmd record -p function_graph -e irq_handler_entry -l do_IRQ sleep 10
# trace-cmd report
<idle>-0 [000] 157412.933969: funcgraph_entry: | do_IRQ() {
<idle>-0 [000] 157412.933974: irq_handler_entry: irq=48 name=eth0
<idle>-0 [000] 157412.934004: funcgraph_exit: + 36.358 us | }
<idle>-0 [000] 157413.895004: funcgraph_entry: | do_IRQ() {
<idle>-0 [000] 157413.895011: irq_handler_entry: irq=48 name=eth0
<idle>-0 [000] 157413.895026: funcgraph_exit: + 24.014 us | }
<idle>-0 [000] 157415.891762: funcgraph_entry: | do_IRQ() {
<idle>-0 [000] 157415.891769: irq_handler_entry: irq=48 name=eth0
<idle>-0 [000] 157415.891784: funcgraph_exit: + 22.928 us | }
<idle>-0 [000] 157415.934869: funcgraph_entry: | do_IRQ() {
<idle>-0 [000] 157415.934874: irq_handler_entry: irq=48 name=eth0
<idle>-0 [000] 157415.934906: funcgraph_exit: + 37.512 us | }
<idle>-0 [000] 157417.888373: funcgraph_entry: | do_IRQ() {
<idle>-0 [000] 157417.888381: irq_handler_entry: irq=48 name=eth0
<idle>-0 [000] 157417.888398: funcgraph_exit: + 25.943 us | }
SEE ALSO
trace-cmd(1), trace-cmd-report(1), trace-cmd-start(1),
trace-cmd-stop(1), trace-cmd-extract(1), trace-cmd-reset(1),
trace-cmd-split(1), trace-cmd-list(1), trace-cmd-listen(1)
AUTHOR
Written by Steven Rostedt, <rostedt@goodmis.org[1]>
RESOURCES
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
COPYING
Copyright (C) 2010 Red Hat, Inc. Free use of this software is granted
under the terms of the GNU Public License (GPL).
NOTES
1. rostedt@goodmis.org
mailto:rostedt@goodmis.org
[FIXME: source] 06/22/2010