Man Linux: Main Page and Category List

NAME

       tiotest - Threaded I/O bench

SYNOPSIS

       tiotest  [-h]  [-W]  [-f SizeInMB] [-d TestDir] [-b BlkSizeInBytes] [-r
       NumberRandOpsPerThread] [-t NumberOfThreads] [-T] [-c] [-L]  [-S]  [-R]
       [-D DebugLevel] [-k SkipTestNoN]

DESCRIPTION

       tiotest is a file system benchmark especially designed to test
        I/O performance with multiple running threads.

OPTIONS

       -h      Display a brief help and exit.

       -W      Instructs  tiotest to wait for previous thread to finish before
               starting a new one in the writing phase. This  results  in  the
               files to be sequentially allocated and thus prevents them to be
               fragmented. Of course the writeside test is not  parallel  then
               but  in  readside  the  files  are physically more sequentially
               placed on the media (well this depends on the filesystem  too).

       -f SizeInMB
               The filesize per threat in MBytes. Defaults to 10 MB.

       -d TestDir
               The  directory  in  which  to  test. Defaults to ., the current
               directory.

       -b BlkSizeInBytes
               The blocksize in Bytes to use. Defaults to 4096.

       -r NumberRandOpsPerThread
               Random I/O operations per thread. Defaults to 1000.

       -t NumberOfThreads
               The number of concurrent test threads. Defaults to 4.

       -T      More terse output.

       -c      Consistency check data. This should be used  for  stresstesting
               the  media  rather than benchmarking (it will slow io and raise
               cpu percentage).  It is especially usefull to  seek  media  for
               very hard to detect errors.

       -L      Hide latency output.

       -S      Do writing synchronously.

       -R      Use raw drives.

       -D DebugLevel
               Set the debug level.

       -k fISkipTestNoN
               Skip test number n. Could be used several times.

               Example:

                      while tiotest -c -f 2000 ; do echo run ok ; done

       To  get usefull results the used file sizes should be a lot larger than
       the physical amount of memory you have. A good idea is to boot with  16
       Megs  of  RAM  (Try passing the "mem=16M" option to the kernel to limit
       Linux to using a very small amount of memory) and into Single User mode
       only.

SEE ALSO

       tiobench(1), bonnie(1), hdparm(8)

AUTHOR

       tiotest was written by Mika Kuoppala <miku@iki.fi>.

       This  manual  page  was written by Peter Palfrader <weasel@debian.org>,
       for the Debian GNU/Linux system (but may be used by others).