NAME
sensors - print sensors information
SYNOPSIS
sensors [ options ] [ chips ]
sensors -s [ chips ]
sensors --bus-list
DESCRIPTION
sensors is used to show the current readings of all sensor chips.
sensors -s is used to set all limits as specified in the configuration
file.
sensors --bus-list is used to generate bus statements suitable for the
configuration file.
OPTIONS
-c config-file
Specify a configuration file. If no file is specified, the
libsensors default configuration file is used. Use ‘-c
/dev/null’ to temporarily disable this default configuration
file.
-h Print a help text and exit.
-s Evaluate all ‘set’ statements in the configuration file and
exit. You must be ‘root’ to do this. If this parameter is not
specified, no ‘set’ statement is evaluated.
-A Do not show the adapter for each chip.
-u Raw output. This mode is only meant for debugging.
-v Print the program version and exit.
-f Print the temperatures in degrees Fahrenheit instead of Celsius.
--bus-list
Generate bus statements suitable for using in sensors.conf. Such
bus statements are only needed if you have several chips sharing
the same address on different buses of the same type. As bus
numbers are usually not guaranteed to be stable over reboots,
these statements let you refer to each bus by its name rather
than numbers.
FILES
/etc/sensors3.conf
/etc/sensors.conf
The system wide configuration file. See sensors.conf(5) for
further details.
SEE ALSO
sensors.conf(5)
AUTHOR
Frodo Looijaard and the lm_sensors group http://www.lm-sensors.org/