NAME
rrdgraph_libdbi - fetching data for graphing in rrdtool graph via
libdbi
SYNOPSIS
<rrdfile> = sql//<libdbi
driver>/<driver-option-name>=<driver-option-value>/...[/rrdminstepsize=<stepsize>][/rrdfillmissing=<fill
missing n samples>]//<table>/<unixtimestamp column>/<data value
column>[/derive]/<where clause 1>/.../<where clause n>
DESCRIPTION
This pseudo-rrd-filename defines a sql datasource:
sql//
magic cookie-prefix for a libdbi type datasource
<libdbi driver>
which libdbi driver to use (e.g: mysql)
<driver-option-name>=<driver-option-value>
defines the parameters that are required to connect to the database with the given libdbi driver
(These drivers are libdbi dependent - for details please look at the driver documentation of libdbi!)
/rrdminstepsize=<minimum step size>
defines the minimum number of the step-length used for graphing (default: 300 seconds)
/rrdfillmissing=<fill missing steps>
defines the number of steps to fill with the last value to avoid NaN boxes due to data-insertation jitter (default: 0 steps)
<table>
defines the table from which to fetch the resultset.
If there is a need to fetch data from several tables, these tables can be defined by separating the tablenames with a "+"
hex-type-encoding via %xx are translated to the actual value, use %% to use %
<[*]unixtimestamp column>
defines the column of E<lt>tableE<gt> which contains the unix-timestamp
- if this is a DATETIME field in the database, then prefix with leading '*'
hex-type-encoding via %xx are translated to the actual value, use %% to use %
<data value column>
defines the column of E<lt>tableE<gt> which contains the value column, which should be graphed
hex-type-encoding via %xx are translated to the actual value, use %% to use %
/derive
defines that the data value used should be the delta of the 2 consecutive values (to simulate COUNTER or DERIVE type datasources)
/<where clause(s)>
defines one (ore more) where clauses that are joined with AND to filter the entries in the <lt>table<gt>
hex-type-encoding via %xx are translated to the actual value, use %% to use %
the returned value column-names, which can be used as ds-names, are:
min, avg, max, count and sigma
are returned to be used as ds-names in your DS definition.
The reason for using this is that if the consolidation function is used for min/avg and max, then the engine is used several times.
And this results in the same SQL Statements used several times
EXAMPLES
Here an example of a table in a MySQL database:
DB connect information
dbhost=127.0.0.1
user=rrd
password=secret
database=rrd
here the table:
CREATE TABLE RRDValue (
RRDKeyID bigint(20) NOT NULL,
UnixTimeStamp int(11) NOT NULL,
value double default NOT NULL,
PRIMARY KEY (RRDKeyID,UnixTimeStamp)
);
and the RRDKeyID we want to graph for is: 1141942900757789274
The pseudo rrd-filename to access this is:
"sql//mysql/host=127.0.0.1/dbname=rrd/username=rrd/password=secret//RRDValue/UnixTimeStamp/value/RRDKeyID=1141464142203608274"
To illustrate this here a command to create a graph that contains the
actual values.
DS_BASE="sql//mysql/host=127.0.0.1/dbname=rrd/username=rrd/password=passwd//RRDValue/UnixTimeStamp/value/RRDKeyID=1141942900757789274"
rrdtool graph test.png --imgformat=PNG --start=-1day --end=+3hours --width=1000 --height=600 \
"DEF:min=$DS_BASE:min:AVERAGE" \
"LINE1:min#FF0000:value" \
"DEF:avg=$DS_BASE:avg:AVERAGE" \
"LINE1:avg#00FF00:average" \
"DEF:max=$DS_BASE:max:AVERAGE" \
"LINE1:max#FF0000:max" \
"DEF:sigma=$DS_BASE:sigma:AVERAGE" \
"CDEF:upper=avg,4,sigma,*,+" \
"LINE1:upper#0000FF:+4 sigma" \
"CDEF:lower=avg,4,sigma,*,-" \
"LINE1:lower#0000FF:-4 sigma"
NOTES
* Naturally you can also use any other kind of driver that libdbi
supports - e.g postgres, ...
* From the way the data source is joined, it should also be possible to
do joins over different tables
(separate tables with "," in table and add in the WHERE Clauses the
table equal joins.
This has not been tested!!!)
* It should also be relatively simple to add to the database using the
same data source string.
This has not been implemented...
* The aggregation functions are ignored and several data columns are
used instead
to avoid querying the same SQL several times when minimum, average
and maximum are needed for graphing...
* for DB efficiency you should think of having 2 tables, one containing
historic values and the other containing the latest data.
This second table should be kept small to allow for the least ammount
of blocking SQL statements.
Whith mysql you can even use myisam table-type for the first and
InnoDB for the second.
This is especially interresting as with tables with +100M rows myisam
is much smaller then InnoDB.
* To debug the SQL statements set the environment variable RRDDEBUGSQL
and the actual SQL statements and the timing is printed to stderr.
BUGS
* at least on Linux please make sure that the libdbi driver is
explicitly linked against libdbi.so.0
check via ldd /usr/lib/dbd/libmysql.so, that there is a line with
libdbi.so.0.
otherwise at least the perl module RRDs will fail because the dynamic
linker can not find some symbols from libdbi.so.
(this only happens when the libdbi driver is actually used the first
time!)
This is KNOWN to be the case with RHEL4 and FC4 and FC5! (But
actually this is a bug with libdbi make files!)
* at least version 0.8.1 of libdbiexhibits a bug with BINARY fields
(shorttext,text,mediumtext,longtext and possibly also BINARY and BLOB
fields),
that can result in coredumps of rrdtool.
The tool will tell you on stderr if this occures, so that you know
what may be the reason.
If you are not experiencing these coredumps, then set the environment
variable RRD_NO_LIBDBI_BUG_WARNING,
and then the message will not get shown.
AUTHOR
Martin Sperl <rrdtool@martin.sperl.org>