NAME
rio - program to control a Diamond RIO MP3 player
SYNOPSIS
rio [options] files ...
DESCRIPTION
This manual page documents briefly the rio command. This manual page
was written for the Debian GNU/Linux distribution because the original
program does not have a manual page.
rio is a CLI controller for a Diamond Rio MP3 file player.
The default ioport is 0x378. If this is not the ioport for your
printer port, you will have to use the -p option.
INITIALIZATION
Initialization should only be performed on new or corrupt cards. You
can initialize with bad block checking enabled (-iy) which will test
all blocks on the internal or external flash ram (which ever is
selected) and note all bad blocks. This process will take some time
(upto 20 minutes on slow machines). You can also initialize with bad
block checking disabled (-in) which is much quicker but all blocks
(even bad blocks) will be used.
If you want to delete all files on the device, the (-za) option should
be used instead of using the initialization options mentioned above.
OPTIONS
A summary of options are included below.
-d Display Directory
-iy initialize with check for bad blocks
-in initialize without check for bad blocks
-x perform operations on external flash ram
-u specify file(s) to upload
-g specify file to download
-f specify text based playlist file which contains files to be
upload
-z specify file to delete
-za delete all files
-o specify new playlist order in quotes
-p specify parallel port base IO address, default=0x378
-v enable verbose mode
-di specify initialization delay
-dt specify tx delay
-dr specify rx delay
EXAMPLES
display directory using parallel port at 0x278
rio -p 0x278 -d
initialize (with bad block check) and upload files
rio -iy -u *.mp3
delete existing files and upload playlist onto external flash ram
rio -za -f playlist.txt -x
initialize, upload files in playlist and then display directory
rio -d -in -f playlist.txt
download file then delete it and finally display directory
rio -d -g mp3Files/song.mp3 -z song.mp3
reverse playlist order and display directory, also change rx iodelay
rio -o "5 4 3 2 1" -d -dr 4
SEE ALSO
file:/usr/doc/rio/README.gz http://www.world.co.uk.sba/index.htm
AUTHOR
This manual page was written by Vince Mulhollon <vlm@debian.org>, for
the Debian GNU/Linux system (but may be used by others).