NAME
proslicerl - Measure the echo-return loss on Voicetronix FXS telephony
modules
SYNOPSIS
proslicerl [options]
DESCRIPTION
The proslicerl utility tests the echo-return from a handset connected
to a Voicetronix FXS module, such as those used on the OpenPCI range of
cards. It can scan all available impedance values to find the best
match for a particular handset.
When running this test the handset must be off-hook and should have the
microphone well muted for the duration of the test.
A series of tones will be played down the line to determine the ERL in
several parts of the audio spectrum. You should avoid creating any
other noise on the line while this test is running, or the results may
be skewed.
If no --impedance is specified, and the --scan option is not used, then
the default impedance value (based on the port’s country selection)
will be used.
OPTIONS
The following options are available:
--help, -?
Show summary of options.
--card number
Explicitly select the card to test. Default is card 0.
--port number
Explicitly select the port to test. Default is port 0 of the
card being tested.
--impedance number
Test a particular impedance setting [0 - 7].
--scan Test all available impedances.
--playgain db
Set the hardware play gain. Values may range from -12.0 to
12.0.
--recgain db
Set the hardware record gain. Values may range from -12.0 to
12.0.
SEE ALSO
vdaaerl(1)
AUTHOR
Ron Lee, Peter Wintulich, David Rowe, Voicetronix
<support@voicetronix.com.au>
This manual page was written by Ron <ron@debian.org>, for the Debian
project (but may be used by others).