NAME
perlsyn - Perl syntax
DESCRIPTION
A Perl program consists of a sequence of declarations and statements
which run from the top to the bottom. Loops, subroutines and other
control structures allow you to jump around within the code.
Perl is a free-form language, you can format and indent it however you
like. Whitespace mostly serves to separate tokens, unlike languages
like Python where it is an important part of the syntax.
Many of Perl’s syntactic elements are optional. Rather than requiring
you to put parentheses around every function call and declare every
variable, you can often leave such explicit elements off and Perl will
figure out what you meant. This is known as Do What I Mean,
abbreviated DWIM. It allows programmers to be lazy and to code in a
style with which they are comfortable.
Perl borrows syntax and concepts from many languages: awk, sed, C,
Bourne Shell, Smalltalk, Lisp and even English. Other languages have
borrowed syntax from Perl, particularly its regular expression
extensions. So if you have programmed in another language you will see
familiar pieces in Perl. They often work the same, but see perltrap
for information about how they differ.
Declarations
The only things you need to declare in Perl are report formats and
subroutines (and sometimes not even subroutines). A variable holds the
undefined value ("undef") until it has been assigned a defined value,
which is anything other than "undef". When used as a number, "undef"
is treated as 0; when used as a string, it is treated as the empty
string, ""; and when used as a reference that isn’t being assigned to,
it is treated as an error. If you enable warnings, you’ll be notified
of an uninitialized value whenever you treat "undef" as a string or a
number. Well, usually. Boolean contexts, such as:
my $a;
if ($a) {}
are exempt from warnings (because they care about truth rather than
definedness). Operators such as "++", "--", "+=", "-=", and ".=", that
operate on undefined left values such as:
my $a;
$a++;
are also always exempt from such warnings.
A declaration can be put anywhere a statement can, but has no effect on
the execution of the primary sequence of statements--declarations all
take effect at compile time. Typically all the declarations are put at
the beginning or the end of the script. However, if you’re using
lexically-scoped private variables created with "my()", you’ll have to
make sure your format or subroutine definition is within the same block
scope as the my if you expect to be able to access those private
variables.
Declaring a subroutine allows a subroutine name to be used as if it
were a list operator from that point forward in the program. You can
declare a subroutine without defining it by saying "sub name", thus:
sub myname;
$me = myname $0 or die "can't get myname";
Note that myname() functions as a list operator, not as a unary
operator; so be careful to use "or" instead of "||" in this case.
However, if you were to declare the subroutine as "sub myname ($)",
then "myname" would function as a unary operator, so either "or" or
"||" would work.
Subroutines declarations can also be loaded up with the "require"
statement or both loaded and imported into your namespace with a "use"
statement. See perlmod for details on this.
A statement sequence may contain declarations of lexically-scoped
variables, but apart from declaring a variable name, the declaration
acts like an ordinary statement, and is elaborated within the sequence
of statements as if it were an ordinary statement. That means it
actually has both compile-time and run-time effects.
Comments
Text from a "#" character until the end of the line is a comment, and
is ignored. Exceptions include "#" inside a string or regular
expression.
Simple Statements
The only kind of simple statement is an expression evaluated for its
side effects. Every simple statement must be terminated with a
semicolon, unless it is the final statement in a block, in which case
the semicolon is optional. (A semicolon is still encouraged if the
block takes up more than one line, because you may eventually add
another line.) Note that there are some operators like "eval {}" and
"do {}" that look like compound statements, but aren’t (they’re just
TERMs in an expression), and thus need an explicit termination if used
as the last item in a statement.
Truth and Falsehood
The number 0, the strings '0' and '', the empty list "()", and "undef"
are all false in a boolean context. All other values are true.
Negation of a true value by "!" or "not" returns a special false value.
When evaluated as a string it is treated as '', but as a number, it is
treated as 0.
Statement Modifiers
Any simple statement may optionally be followed by a SINGLE modifier,
just before the terminating semicolon (or block ending). The possible
modifiers are:
if EXPR
unless EXPR
while EXPR
until EXPR
foreach LIST
The "EXPR" following the modifier is referred to as the "condition".
Its truth or falsehood determines how the modifier will behave.
"if" executes the statement once if and only if the condition is true.
"unless" is the opposite, it executes the statement unless the
condition is true (i.e., if the condition is false).
print "Basset hounds got long ears" if length $ear >= 10;
go_outside() and play() unless $is_raining;
The "foreach" modifier is an iterator: it executes the statement once
for each item in the LIST (with $_ aliased to each item in turn).
print "Hello $_!\n" foreach qw(world Dolly nurse);
"while" repeats the statement while the condition is true. "until"
does the opposite, it repeats the statement until the condition is true
(or while the condition is false):
# Both of these count from 0 to 10.
print $i++ while $i <= 10;
print $j++ until $j > 10;
The "while" and "until" modifiers have the usual ""while" loop"
semantics (conditional evaluated first), except when applied to a
"do"-BLOCK (or to the deprecated "do"-SUBROUTINE statement), in which
case the block executes once before the conditional is evaluated. This
is so that you can write loops like:
do {
$line = <STDIN>;
...
} until $line eq ".\n";
See "do" in perlfunc. Note also that the loop control statements
described later will NOT work in this construct, because modifiers
don’t take loop labels. Sorry. You can always put another block
inside of it (for "next") or around it (for "last") to do that sort of
thing. For "next", just double the braces:
do {{
next if $x == $y;
# do something here
}} until $x++ > $z;
For "last", you have to be more elaborate:
LOOP: {
do {
last if $x = $y**2;
# do something here
} while $x++ <= $z;
}
NOTE: The behaviour of a "my" statement modified with a statement
modifier conditional or loop construct (e.g. "my $x if ...") is
undefined. The value of the "my" variable may be "undef", any
previously assigned value, or possibly anything else. Don’t rely on
it. Future versions of perl might do something different from the
version of perl you try it out on. Here be dragons.
Compound Statements
In Perl, a sequence of statements that defines a scope is called a
block. Sometimes a block is delimited by the file containing it (in
the case of a required file, or the program as a whole), and sometimes
a block is delimited by the extent of a string (in the case of an
eval).
But generally, a block is delimited by curly brackets, also known as
braces. We will call this syntactic construct a BLOCK.
The following compound statements may be used to control flow:
if (EXPR) BLOCK
if (EXPR) BLOCK else BLOCK
if (EXPR) BLOCK elsif (EXPR) BLOCK ... else BLOCK
LABEL while (EXPR) BLOCK
LABEL while (EXPR) BLOCK continue BLOCK
LABEL until (EXPR) BLOCK
LABEL until (EXPR) BLOCK continue BLOCK
LABEL for (EXPR; EXPR; EXPR) BLOCK
LABEL foreach VAR (LIST) BLOCK
LABEL foreach VAR (LIST) BLOCK continue BLOCK
LABEL BLOCK continue BLOCK
Note that, unlike C and Pascal, these are defined in terms of BLOCKs,
not statements. This means that the curly brackets are required--no
dangling statements allowed. If you want to write conditionals without
curly brackets there are several other ways to do it. The following
all do the same thing:
if (!open(FOO)) { die "Can't open $FOO: $!"; }
die "Can't open $FOO: $!" unless open(FOO);
open(FOO) or die "Can't open $FOO: $!"; # FOO or bust!
open(FOO) ? 'hi mom' : die "Can't open $FOO: $!";
# a bit exotic, that last one
The "if" statement is straightforward. Because BLOCKs are always
bounded by curly brackets, there is never any ambiguity about which
"if" an "else" goes with. If you use "unless" in place of "if", the
sense of the test is reversed.
The "while" statement executes the block as long as the expression is
true. The "until" statement executes the block as long as the
expression is false. The LABEL is optional, and if present, consists
of an identifier followed by a colon. The LABEL identifies the loop
for the loop control statements "next", "last", and "redo". If the
LABEL is omitted, the loop control statement refers to the innermost
enclosing loop. This may include dynamically looking back your call-
stack at run time to find the LABEL. Such desperate behavior triggers
a warning if you use the "use warnings" pragma or the -w flag.
If there is a "continue" BLOCK, it is always executed just before the
conditional is about to be evaluated again. Thus it can be used to
increment a loop variable, even when the loop has been continued via
the "next" statement.
Loop Control
The "next" command starts the next iteration of the loop:
LINE: while (<STDIN>) {
next LINE if /^#/; # discard comments
...
}
The "last" command immediately exits the loop in question. The
"continue" block, if any, is not executed:
LINE: while (<STDIN>) {
last LINE if /^$/; # exit when done with header
...
}
The "redo" command restarts the loop block without evaluating the
conditional again. The "continue" block, if any, is not executed.
This command is normally used by programs that want to lie to
themselves about what was just input.
For example, when processing a file like /etc/termcap. If your input
lines might end in backslashes to indicate continuation, you want to
skip ahead and get the next record.
while (<>) {
chomp;
if (s/\\$//) {
$_ .= <>;
redo unless eof();
}
# now process $_
}
which is Perl short-hand for the more explicitly written version:
LINE: while (defined($line = <ARGV>)) {
chomp($line);
if ($line =~ s/\\$//) {
$line .= <ARGV>;
redo LINE unless eof(); # not eof(ARGV)!
}
# now process $line
}
Note that if there were a "continue" block on the above code, it would
get executed only on lines discarded by the regex (since redo skips the
continue block). A continue block is often used to reset line counters
or "?pat?" one-time matches:
# inspired by :1,$g/fred/s//WILMA/
while (<>) {
?(fred)? && s//WILMA $1 WILMA/;
?(barney)? && s//BETTY $1 BETTY/;
?(homer)? && s//MARGE $1 MARGE/;
} continue {
print "$ARGV $.: $_";
close ARGV if eof(); # reset $.
reset if eof(); # reset ?pat?
}
If the word "while" is replaced by the word "until", the sense of the
test is reversed, but the conditional is still tested before the first
iteration.
The loop control statements don’t work in an "if" or "unless", since
they aren’t loops. You can double the braces to make them such,
though.
if (/pattern/) {{
last if /fred/;
next if /barney/; # same effect as "last", but doesn't document as well
# do something here
}}
This is caused by the fact that a block by itself acts as a loop that
executes once, see "Basic BLOCKs".
The form "while/if BLOCK BLOCK", available in Perl 4, is no longer
available. Replace any occurrence of "if BLOCK" by "if (do BLOCK)".
For Loops
Perl’s C-style "for" loop works like the corresponding "while" loop;
that means that this:
for ($i = 1; $i < 10; $i++) {
...
}
is the same as this:
$i = 1;
while ($i < 10) {
...
} continue {
$i++;
}
There is one minor difference: if variables are declared with "my" in
the initialization section of the "for", the lexical scope of those
variables is exactly the "for" loop (the body of the loop and the
control sections).
Besides the normal array index looping, "for" can lend itself to many
other interesting applications. Here’s one that avoids the problem you
get into if you explicitly test for end-of-file on an interactive file
descriptor causing your program to appear to hang.
$on_a_tty = -t STDIN && -t STDOUT;
sub prompt { print "yes? " if $on_a_tty }
for ( prompt(); <STDIN>; prompt() ) {
# do something
}
Using "readline" (or the operator form, "<EXPR>") as the conditional of
a "for" loop is shorthand for the following. This behaviour is the
same as a "while" loop conditional.
for ( prompt(); defined( $_ = <STDIN> ); prompt() ) {
# do something
}
Foreach Loops
The "foreach" loop iterates over a normal list value and sets the
variable VAR to be each element of the list in turn. If the variable
is preceded with the keyword "my", then it is lexically scoped, and is
therefore visible only within the loop. Otherwise, the variable is
implicitly local to the loop and regains its former value upon exiting
the loop. If the variable was previously declared with "my", it uses
that variable instead of the global one, but it’s still localized to
the loop. This implicit localisation occurs only in a "foreach" loop.
The "foreach" keyword is actually a synonym for the "for" keyword, so
you can use "foreach" for readability or "for" for brevity. (Or
because the Bourne shell is more familiar to you than csh, so writing
"for" comes more naturally.) If VAR is omitted, $_ is set to each
value.
If any element of LIST is an lvalue, you can modify it by modifying VAR
inside the loop. Conversely, if any element of LIST is NOT an lvalue,
any attempt to modify that element will fail. In other words, the
"foreach" loop index variable is an implicit alias for each item in the
list that you’re looping over.
If any part of LIST is an array, "foreach" will get very confused if
you add or remove elements within the loop body, for example with
"splice". So don’t do that.
"foreach" probably won’t do what you expect if VAR is a tied or other
special variable. Don’t do that either.
Examples:
for (@ary) { s/foo/bar/ }
for my $elem (@elements) {
$elem *= 2;
}
for $count (10,9,8,7,6,5,4,3,2,1,'BOOM') {
print $count, "\n"; sleep(1);
}
for (1..15) { print "Merry Christmas\n"; }
foreach $item (split(/:[\\\n:]*/, $ENV{TERMCAP})) {
print "Item: $item\n";
}
Here’s how a C programmer might code up a particular algorithm in Perl:
for (my $i = 0; $i < @ary1; $i++) {
for (my $j = 0; $j < @ary2; $j++) {
if ($ary1[$i] > $ary2[$j]) {
last; # can't go to outer :-(
}
$ary1[$i] += $ary2[$j];
}
# this is where that last takes me
}
Whereas here’s how a Perl programmer more comfortable with the idiom
might do it:
OUTER: for my $wid (@ary1) {
INNER: for my $jet (@ary2) {
next OUTER if $wid > $jet;
$wid += $jet;
}
}
See how much easier this is? It’s cleaner, safer, and faster. It’s
cleaner because it’s less noisy. It’s safer because if code gets added
between the inner and outer loops later on, the new code won’t be
accidentally executed. The "next" explicitly iterates the other loop
rather than merely terminating the inner one. And it’s faster because
Perl executes a "foreach" statement more rapidly than it would the
equivalent "for" loop.
Basic BLOCKs
A BLOCK by itself (labeled or not) is semantically equivalent to a loop
that executes once. Thus you can use any of the loop control
statements in it to leave or restart the block. (Note that this is NOT
true in "eval{}", "sub{}", or contrary to popular belief "do{}" blocks,
which do NOT count as loops.) The "continue" block is optional.
The BLOCK construct can be used to emulate case structures.
SWITCH: {
if (/^abc/) { $abc = 1; last SWITCH; }
if (/^def/) { $def = 1; last SWITCH; }
if (/^xyz/) { $xyz = 1; last SWITCH; }
$nothing = 1;
}
Such constructs are quite frequently used, because older versions of
Perl had no official "switch" statement.
Switch statements
Starting from Perl 5.10, you can say
use feature "switch";
which enables a switch feature that is closely based on the Perl 6
proposal.
The keywords "given" and "when" are analogous to "switch" and "case" in
other languages, so the code above could be written as
given($_) {
when (/^abc/) { $abc = 1; }
when (/^def/) { $def = 1; }
when (/^xyz/) { $xyz = 1; }
default { $nothing = 1; }
}
This construct is very flexible and powerful. For example:
use feature ":5.10";
given($foo) {
when (undef) {
say '$foo is undefined';
}
when ("foo") {
say '$foo is the string "foo"';
}
when ([1,3,5,7,9]) {
say '$foo is an odd digit';
continue; # Fall through
}
when ($_ < 100) {
say '$foo is numerically less than 100';
}
when (\&complicated_check) {
say 'a complicated check for $foo is true';
}
default {
die q(I don't know what to do with $foo);
}
}
"given(EXPR)" will assign the value of EXPR to $_ within the lexical
scope of the block, so it’s similar to
do { my $_ = EXPR; ... }
except that the block is automatically broken out of by a successful
"when" or an explicit "break".
Most of the power comes from implicit smart matching:
when($foo)
is exactly equivalent to
when($_ ~~ $foo)
Most of the time, "when(EXPR)" is treated as an implicit smart match of
$_, i.e. "$_ ~~ EXPR". (See "Smart matching in detail" for more
information on smart matching.) But when EXPR is one of the below
exceptional cases, it is used directly as a boolean:
· a subroutine or method call
· a regular expression match, i.e. "/REGEX/" or "$foo =~ /REGEX/", or
a negated regular expression match ("!/REGEX/" or "$foo !~
/REGEX/").
· a comparison such as "$_ < 10" or "$x eq "abc"" (or of course "$_
~~ $c")
· "defined(...)", "exists(...)", or "eof(...)"
· a negated expression "!(...)" or "not (...)", or a logical
exclusive-or "(...) xor (...)".
· a filetest operator, with the exception of "-s", "-M", "-A", and
"-C", that return numerical values, not boolean ones.
· the ".." and "..." flip-flop operators.
In those cases the value of EXPR is used directly as a boolean.
Furthermore:
· If EXPR is "... && ..." or "... and ...", the test is applied
recursively to both arguments. If both arguments pass the test,
then the argument is treated as boolean.
· If EXPR is "... || ...", "... // ..." or "... or ...", the test is
applied recursively to the first argument.
These rules look complicated, but usually they will do what you want.
For example you could write:
when (/^\d+$/ && $_ < 75) { ... }
Another useful shortcut is that, if you use a literal array or hash as
the argument to "given", it is turned into a reference. So
"given(@foo)" is the same as "given(\@foo)", for example.
"default" behaves exactly like "when(1 == 1)", which is to say that it
always matches.
Breaking out
You can use the "break" keyword to break out of the enclosing "given"
block. Every "when" block is implicitly ended with a "break".
Fall-through
You can use the "continue" keyword to fall through from one case to the
next:
given($foo) {
when (/x/) { say '$foo contains an x'; continue }
when (/y/) { say '$foo contains a y' }
default { say '$foo does not contain a y' }
}
Switching in a loop
Instead of using "given()", you can use a "foreach()" loop. For
example, here’s one way to count how many times a particular string
occurs in an array:
my $count = 0;
for (@array) {
when ("foo") { ++$count }
}
print "\@array contains $count copies of 'foo'\n";
On exit from the "when" block, there is an implicit "next". You can
override that with an explicit "last" if you’re only interested in the
first match.
This doesn’t work if you explicitly specify a loop variable, as in "for
$item (@array)". You have to use the default variable $_. (You can use
"for my $_ (@array)".)
Smart matching in detail
The behaviour of a smart match depends on what type of thing its
arguments are. The behaviour is determined by the following table: the
first row that applies determines the match behaviour (which is thus
mostly determined by the type of the right operand). Note that the
smart match implicitly dereferences any non-blessed hash or array ref,
so the "Hash" and "Array" entries apply in those cases. (For blessed
references, the "Object" entries apply.)
Note that the "Matching Code" column is not always an exact rendition.
For example, the smart match operator short-circuits whenever possible,
but "grep" does not.
$a $b Type of Match Implied Matching Code
====== ===== ===================== =============
Any undef undefined !defined $a
Any Object invokes ~~ overloading on $object, or dies
Hash CodeRef sub truth for each key[1] !grep { !$b->($_) } keys %$a
Array CodeRef sub truth for each elt[1] !grep { !$b->($_) } @$a
Any CodeRef scalar sub truth $b->($a)
Hash Hash hash keys identical (every key is found in both hashes)
Array Hash hash slice existence grep { exists $b->{$_} } @$a
Regex Hash hash key grep grep /$a/, keys %$b
undef Hash always false (undef can't be a key)
Any Hash hash entry existence exists $b->{$a}
Hash Array hash slice existence grep { exists $a->{$_} } @$b
Array Array arrays are comparable[2]
Regex Array array grep grep /$a/, @$b
undef Array array contains undef grep !defined, @$b
Any Array match against an array element[3]
grep $a ~~ $_, @$b
Hash Regex hash key grep grep /$b/, keys %$a
Array Regex array grep grep /$b/, @$a
Any Regex pattern match $a =~ /$b/
Object Any invokes ~~ overloading on $object, or falls back:
Any Num numeric equality $a == $b
Num numish[4] numeric equality $a == $b
undef Any undefined !defined($b)
Any Any string equality $a eq $b
1 - empty hashes or arrays will match.
2 - that is, each element smart-matches the element of same index in the
other array. [3]
3 - If a circular reference is found, we fall back to referential equality.
4 - either a real number, or a string that looks like a number
Custom matching via overloading
You can change the way that an object is matched by overloading the
"~~" operator. This may alter the usual smart match semantics.
It should be noted that "~~" will refuse to work on objects that don’t
overload it (in order to avoid relying on the object’s underlying
structure).
Note also that smart match’s matching rules take precedence over
overloading, so if $obj has smart match overloading, then
$obj ~~ X
will not automatically invoke the overload method with X as an
argument; instead the table above is consulted as normal, and based in
the type of X, overloading may or may not be invoked.
See overload.
Differences from Perl 6
The Perl 5 smart match and "given"/"when" constructs are not absolutely
identical to their Perl 6 analogues. The most visible difference is
that, in Perl 5, parentheses are required around the argument to
"given()" and "when()". Parentheses in Perl 6 are always optional in a
control construct such as "if()", "while()", or "when()"; they can’t be
made optional in Perl 5 without a great deal of potential confusion,
because Perl 5 would parse the expression
given $foo {
...
}
as though the argument to "given" were an element of the hash %foo,
interpreting the braces as hash-element syntax.
The table of smart matches is not identical to that proposed by the
Perl 6 specification, mainly due to the differences between Perl 6’s
and Perl 5’s data models.
In Perl 6, "when()" will always do an implicit smart match with its
argument, whilst it is convenient in Perl 5 to suppress this implicit
smart match in certain situations, as documented above. (The difference
is largely because Perl 5 does not, even internally, have a boolean
type.)
Goto
Although not for the faint of heart, Perl does support a "goto"
statement. There are three forms: "goto"-LABEL, "goto"-EXPR, and
"goto"-&NAME. A loop’s LABEL is not actually a valid target for a
"goto"; it’s just the name of the loop.
The "goto"-LABEL form finds the statement labeled with LABEL and
resumes execution there. It may not be used to go into any construct
that requires initialization, such as a subroutine or a "foreach" loop.
It also can’t be used to go into a construct that is optimized away.
It can be used to go almost anywhere else within the dynamic scope,
including out of subroutines, but it’s usually better to use some other
construct such as "last" or "die". The author of Perl has never felt
the need to use this form of "goto" (in Perl, that is--C is another
matter).
The "goto"-EXPR form expects a label name, whose scope will be resolved
dynamically. This allows for computed "goto"s per FORTRAN, but isn’t
necessarily recommended if you’re optimizing for maintainability:
goto(("FOO", "BAR", "GLARCH")[$i]);
The "goto"-&NAME form is highly magical, and substitutes a call to the
named subroutine for the currently running subroutine. This is used by
"AUTOLOAD()" subroutines that wish to load another subroutine and then
pretend that the other subroutine had been called in the first place
(except that any modifications to @_ in the current subroutine are
propagated to the other subroutine.) After the "goto", not even
"caller()" will be able to tell that this routine was called first.
In almost all cases like this, it’s usually a far, far better idea to
use the structured control flow mechanisms of "next", "last", or "redo"
instead of resorting to a "goto". For certain applications, the catch
and throw pair of "eval{}" and die() for exception processing can also
be a prudent approach.
PODs: Embedded Documentation
Perl has a mechanism for intermixing documentation with source code.
While it’s expecting the beginning of a new statement, if the compiler
encounters a line that begins with an equal sign and a word, like this
=head1 Here There Be Pods!
Then that text and all remaining text up through and including a line
beginning with "=cut" will be ignored. The format of the intervening
text is described in perlpod.
This allows you to intermix your source code and your documentation
text freely, as in
=item snazzle($)
The snazzle() function will behave in the most spectacular
form that you can possibly imagine, not even excepting
cybernetic pyrotechnics.
=cut back to the compiler, nuff of this pod stuff!
sub snazzle($) {
my $thingie = shift;
.........
}
Note that pod translators should look at only paragraphs beginning with
a pod directive (it makes parsing easier), whereas the compiler
actually knows to look for pod escapes even in the middle of a
paragraph. This means that the following secret stuff will be ignored
by both the compiler and the translators.
$a=3;
=secret stuff
warn "Neither POD nor CODE!?"
=cut back
print "got $a\n";
You probably shouldn’t rely upon the "warn()" being podded out forever.
Not all pod translators are well-behaved in this regard, and perhaps
the compiler will become pickier.
One may also use pod directives to quickly comment out a section of
code.
Plain Old Comments (Not!)
Perl can process line directives, much like the C preprocessor. Using
this, one can control Perl’s idea of filenames and line numbers in
error or warning messages (especially for strings that are processed
with "eval()"). The syntax for this mechanism is the same as for most
C preprocessors: it matches the regular expression
# example: '# line 42 "new_filename.plx"'
/^\# \s*
line \s+ (\d+) \s*
(?:\s("?)([^"]+)\2)? \s*
$/x
with $1 being the line number for the next line, and $3 being the
optional filename (specified with or without quotes).
There is a fairly obvious gotcha included with the line directive:
Debuggers and profilers will only show the last source line to appear
at a particular line number in a given file. Care should be taken not
to cause line number collisions in code you’d like to debug later.
Here are some examples that you should be able to type into your
command shell:
% perl
# line 200 "bzzzt"
# the `#' on the previous line must be the first char on line
die 'foo';
__END__
foo at bzzzt line 201.
% perl
# line 200 "bzzzt"
eval qq[\n#line 2001 ""\ndie 'foo']; print $@;
__END__
foo at - line 2001.
% perl
eval qq[\n#line 200 "foo bar"\ndie 'foo']; print $@;
__END__
foo at foo bar line 200.
% perl
# line 345 "goop"
eval "\n#line " . __LINE__ . ' "' . __FILE__ ."\"\ndie 'foo'";
print $@;
__END__
foo at goop line 345.