NAME
mplex - MPEG 1/2 program/system stream multiplexer
SYNOPSIS
mplex [-f|--format format_code] [-i|--vdr-index] index_pathname
[-v|--verbose num] [-b|--video-buffer video_buffer_size_kB[,
video_buffer_size_kB...]] [-L|--lpcm-params params[, params...]]
[-r|--muxed-bitrate muxed_bitrate_kbps] [-l|--mux-limit num]
[-O|--sync-offset num[ms|s|pts]] [-R|--run-in num] [-V|--vbr]
[-C|--cbr] [-s|--sector-size sector_size_B] [-p|--packets-per-pack num]
[-h|--system-headers] [-S|--max-segment-size output_filesize_limit_MB]
[-M|--split-segment]
[-?|--help] -o|--output output_pathname_pattern input_file...
DESCRIPTION
Mplex is a general-purpose audio/video multiplexer for MPEG-1/MPEG-2.
It accepts one or more MPEG-1/2 video stream, MPEG layer I/II/III, DTS,
AC3 and LPCM audio streams and multiplexes them into a combined
program/system stream according to the constraints specified. Many
different types of output structure are supported along with presets
for standard VCD and SVCD streams. These latter can be burned to CD
using tools such as vcdimager(1) and played in stand-alone players.
It is also capable of automatically splitting the output stream into
chunks of a specified size either independently or at sequence
end/start points in the input video stream.
GENERAL FUNCTION LETTERS
-o|--output output_filename_pattern
This mandatory option sets the pattern for the name(s) of output
files.
An integer format code (e.g. %d) in the name is replaced by the
number of the file generated (see printf(3)).
-v|--verbose num
Set verbosity level to num:
0 - warnings and errors only,
1 - information as well,
2 - really verbose.
-?|--help
Display a synopsis of the command syntax.
FUNCTION LETTERS
-f|--format format_code
This command allows one of a number of convenient preset output
formats or generic MPEG1 or MPEG2 output to be selected. For the
generic formats other function letters can be used to control
many aspects of the multiplexed stream. For VCD/SVCD/DVD
compliant output the corresponding formats must be used as the
standards require the multiplexer to enforce a variety of
special constraints on the structure of the output stream.
0 - Generic MPEG1. A simple general-purpose MPEG1 format
primarily suitable for software decoders. Buffer sizes and VBR
must be specified. Bit-rate can be auto-detected.
1 - VCD. Standard VCD. Overrides other option settings.
2 - User VCD. VCD format but buffer size, bit rate and VBR can
be set manually.
3 - Generic MPEG2. Like 0 except MPEG2.
4 - SVCD. Standard SVCD. Overrides other option settings.
5 - User-rate SVCD. SVCD format but buffer size bit rate and
VBR can be set.
6 - VCD Stills stream (mixed mode with hi-res and standard-res
image streams multiplexed are supported).
7 - SVCD Stills stream.
8 - DVD (with NAV sectors). Don’t get too excited. This is
really a
very minimal mux format. It includes empty versions of the
peculiar
VOBU start sectors DVD VOB’s include. This is enough to
persuade some
hardware players to play the stream but is a long way from full
DVD authoring.
9 - DVD. As above but without the empty VOBU sectors.
-W|--workarounds workaround_flag [,workaround_flag...]
A comma-seperated list of flags that set special work-arounds
for what are suspected to be parser Bugs in widely used players.
No workarounds are (currently) implemented but history suggests
this may change quickly ;-) -i|--vdr-index index_pathname This
tells mplex to generate an index file for the output in the
format used by the ’vdr’ (video disk recorder package). Useful
if you want to write output into vdr’s recordings directory for
playback on your video recorder PC. This probably only useful in
combination with -f 9.
-r|--mux-bitrate num
The total (non VBR) / peak (VBR) bit-rate of the output stream
in k Bits/sec. If unspecified and not set by a preset it is
automatically calculated from the input stream.
-b|--video-buffer numlist
A comma-seperateed list of video decoder buffer sizes in KB for
the video streams (given in the order the video streams appear
on the command line). The default is 46KB the (tiny) size
specified for VCD. The size to use for SVCD is the (more
reasonable) 230KB. If you are encoding for a half-decent
software decoder it makes sense to push this up to 500K or more.
-L|--lpcm-params
samples_per_sec:channels:bits_per_sample
[, samples_per_sec:channels:bits_per_sample
...]
A comma-seperated list of paramter sets for the lpcm audio
streams (given in the order the lpcm streams appear on the
command line). Each parameter set comprises the sampling rate
in Hz, the number of channels, and the number of bits per sample
seperated by colons. For example, the default 48kHz two-channel
16-bit audio would be specified as 48000:2:16.
Note: these parameters are necessary because mplex expects raw
LPCM audio data without any headers. That is: for each sample
point a group of 16,20, or 24 bit amplitude values, one for each
channel. Amplitude values are signed with the constituent bytes
in big-endian (most significant bytes first) order. For 20 bit
samples I am not sure but what documentation I have suggests
such samples are padded at the lsb end so that they byte-align
at the most significant bits.
-l|--mux-limit num
Multiplex limit. Multiplex only the specified number of
seconds. Useful for tuning and debugging.
-O|--sync-offset num[ms|s|0.ft R
Set the presentation timestamp offset of video stream w.r.t.
audio stream (video-audio) in mSec. This flag is used to
produce a stream with synchronised audio/video when one stream
started before/after the other. This is common when transcoding
as the synchronisation information is typically lost during the
(seperate) decoding/encoding of audio and video.
By appending ’s’, ’ms’ or ’mpt’ the offset can given in seconds,
milliseconds or MPEG clock ticks (1/90000th of a second)
respectively. If no suffix is given milliseconds are assumed.
-R|--run-in num
Set a non-default run-in (the time data is preloaded into
buffers before decoding is scheduled) at the start of each
sequence in video frame intervals. By default a run-in matching
the specified size of the video and audio buffers in the decoder
and the type of multiplexing (constant or variable bit-rate) is
selected automatically.
-V|--vbr
Force variable bit rate multiplexing even if selected profile
defaults to constant-bit-rate.
-C||-cbr
Force constant bit rate multiplexing even if selected profile
defaults to variable bit-rate.
-s|--sector-size num
This option specifies the sector size of the output stream in
bytes.
-p|--packets-per-pack num
This option specifies the number of packets per pack in the
output stream.
-S|--max-segment-size num
This option specifies the maximum size of output files in MBytes
(2^10) When the limit is reached a new file is started. The
default is (0) unlimited.
Note: This option is not for splitting a long video across
multiple VCD’s or SVCD’s.
It simply splits a single long sequence into in a way that
prevents bits of a video GOP(group of pictures) or audio frame
being split between chunks. This is fine for formats like that
used for DVDs where all stream parameters appear every GOP.
However, for VCD / SVCD it won’t work as the players expect each
file to start a new MPEG sequence.
For VCD / SVCD a different technique is used. If mplex
encounters a sequence break (sequence end followed by start) in
the input video stream it starts a new output stream and file at
the sequence start. Thus to split a long video across
VCD’s/SVCD’s you have to get the MPEG video encoder to introduce
sequence splits at the right points (see mpeg2enc(1) for details
of how to do this).
-M|--ignore-seqend-markers
This flag makes mplex ignore sequence end markers embedded in
the first video stream instead of switching to a new output
file. This is sometimes useful splitting a long stream in files
based on a -S limit that doesn’t need a run-in/run-out like
(S)VCD.
-h|--system-headers
A system header is generated in every pack rather than just in
the first.
DIAGNOSTIC OUTPUT
When multiplexing using mplex you may get warning or error messages
complaining about buffer underflow. This means that the bit-rate you
have specified is simply too low to permit the video and audio to be
played back without skipping. The fix is to either reduce the data-
rate of the input material or increased the output stream bit-rate.
BUGS
The multiplexer should handle MPEG(5.1) audio.
AUTHOR
This man page was written by Andrew Stevens.
If you have questions, remarks, problems or you just want to contact
the developers, the main mailing list for the MJPEG-tools is:
mjpeg-users@lists.sourceforge.net
For more info, see our website at
http://mjpeg.sourceforge.net
SEE ALSO
mpeg2enc(1), mp2enc(1), lavrec(1), lavplay(1), lav2yuv(1), lav2wav(1),
yuvscaler(1)