NAME
mummer - package for sequence alignment of multiple genomes
SYNOPSIS
mummer-annotate <gapfile><datafile>
combineMUMs <RefSequence><MatchSequences><GapsFile>
delta-filter [options]<deltafile>
dnadiff [options]<reference><query> or [options]-d<deltafile>
exact-tandems <file><min-match-len>
gaps
mapview [options]<coordsfile>[UTRcoords][CDScoords]
mgaps [-d<DiagDiff>][-f<DiagFactor>][-l<MatchLen>][-s<MaxSeparation>]
mummer [options]<reference-file><query-files>
mummerplot [options]<matchfile>
nucmer [options]<Reference><Query>
nucmer2xfig
promer [options]<Reference><Query>
repeat-match [options]<genome-file>
run-mummer1 <fastareference><fastaquery><prefix>[-r]
run-mummer3 <fastareference><multi-fastaquery><prefix>
show-aligns [options]<deltafile><refID><qryID>
Input is the .delta output of either the "nucmer" or the "promer"
program passed on the command line.
Output is to stdout, and consists of all the alignments between the
query and reference sequences identified on the command line.
NOTE: No sorting is done by default, therefore the alignments will be
ordered as found in the <deltafile> input.
show-coords [options]<deltafile>
show-snps [options]<deltafile>
show-tiling [options]<deltafile>
DESCRIPTION
OPTIONS
All tools (exept for gaps) obey to the -h, --help, -V and --version
options as one would expect. This help is excellent and makes these man
pages basically obsolete.
combineMUMs Combines MUMs in <GapsFile> by extending matches off ends
and between MUMs. <RefSequence> is a fasta file of the reference
sequence. <MatchSequences> is a multi-fasta file of the sequences
matched against the reference
-D Only output to stdout the difference positions
and characters
-n Allow matches only between nucleotides, i.e., ACGTs
-N num Break matches at <num> or more consecutive non-ACGTs
-q tag Used to label query match
-r tag Used to label reference match
-S Output all differences in strings
-t Label query matches with query fasta header
-v num Set verbose level for extra output
-W file Reset the default output filename witherrors.gaps
-x Don’t output .cover files
-e Set error-rate cutoff to e (e.g. 0.02 is two percent)
dnadiff Run comparative analysis of two sequence sets using nucmer and
its associated utilities with recommended parameters. See MUMmer
documentation for a more detailed description of the output. Produces
the following output files:
.report - Summary of alignments, differences and SNPs
.delta - Standard nucmer alignment output
.1delta - 1-to-1 alignment from delta-filter -1
.mdelta - M-to-M alignment from delta-filter -m
.1coords - 1-to-1 coordinates from show-coords -THrcl .1delta
.mcoords - M-to-M coordinates from show-coords -THrcl .mdelta
.snps - SNPs from show-snps -rlTHC .1delta
.rdiff - Classified ref breakpoints from show-diff -rH .mdelta
.qdiff - Classified qry breakpoints from show-diff -qH .mdelta
.unref - Unaligned reference IDs and lengths (if applicable)
.unqry - Unaligned query IDs and lengths (if applicable)
MANDATORY:
reference Set the input reference multi-FASTA filename
query Set the input query multi-FASTA filename
or
delta file Unfiltered .delta alignment file from nucmer
OPTIONS:
-d|delta Provide precomputed delta file for analysis
-h
--help Display help information and exit
-p|prefix Set the prefix of the output files (default "out")
-V
--version Display the version information and exit
delta-filter
-e float For switches -g -r -q, keep repeats within e percent
of the best LIS score [0, 100], no repeats by default
-g Global alignment using length*identity weighted LIS.
For every reference-query pair, leave only the aligns
which form the longest mutually consistent set
-h Display help information
-i float Set the minimum alignment identity [0, 100], default 0
-l int Set the minimum alignment length, default 0
-q Query alignment using length*identity weighted LIS.
For each query, leave only the aligns which form the
longest consistent set for the query
-r Reference alignment using length*identity weighted LIS.
For each reference, leave only the aligns which form
the longest consistent set for the reference
-u float Set the minimum alignment uniqueness, i.e. percent of
the alignment matching to unique reference AND query
sequence [0, 100], default 0
-o float Set the maximum alignment overlap for -r and -q options
as a percent of the alignment length [0, 100], default
100
Reads a delta alignment file from either nucmer or promer and filters
the alignments based on the command-line switches, leaving only the
desired alignments which are output to stdout in the same delta format
as the input. For multiple switches, order of operations is as follows:
-i -l -u -q -r -g. If an alignment is excluded by a preceding
operation, it will be ignored by the succeeding operations
An important distinction between the -g option and the -r -q options
is that -g requires the alignments to be mutually consistent in their
order, while the -r -q options are not required to be mutually
consistent and therefore tolerate translocations, inversions, etc.
Thus, -r provides a one-to-many, -q a many-to-one, -r -q a one-to-one
local mapping, and -g a one-to-one global mapping of reference and
query bases respectively.
mapview
-h
--help Display help information and exit
-m|mag Set the magnification at which the figure is rendered,
this is an option for fig2dev which is used to generate
the PDF and PS files (default 1.0)
-n|num Set the number of output files used to partition the
output, this is to avoid generating files that are too
large to display (default 10)
-p|prefix Set the output file prefix
(default "PROMER_graph or NUCMER_graph")
-v
--verbose Verbose logging of the processed files
-V
--version Display the version information and exit
-x1 coord Set the lower coordinate bound of the display
-x2 coord Set the upper coordinate bound of the display
-g|ref If the input file is provided by ’mgaps’, set the
reference sequence ID (as it appears in the first column
of the UTR/CDS coords file)
-I Display the name of query sequences
-Ir Display the name of reference genes
mummer Find and output (to stdout) the positions and length of all
sufficiently long maximal matches of a substring in <query-file> and
<reference-file>
-mum compute maximal matches that are unique in both
sequences
-mumcand same as -mumreference
-mumreference compute maximal matches that are unique in
the reference-sequence but not necessarily in the
query-sequence (default)
-maxmatch compute all maximal matches regardless of their
uniqueness
-n match only the characters a, c, g, or t
they can be in upper or in lower case
-l set the minimum length of a match
if not set, the default value is 20
-b compute forward and reverse complement matches
-r only compute reverse complement matches
-s show the matching substrings
-c report the query-position of a reverse complement
match
relative to the original query sequence
-F force 4 column output format regardless of the number
of
reference sequence inputs
-L show the length of the query sequences on the header
line
nuncmer
nucmer generates nucleotide alignments between two mutli-FASTA
input
files. Two output files are generated. The .cluster output file
lists
clusters of matches between each sequence. The .delta file lists
the
distance between insertions and deletions that produce maximal
scoring
alignments between each sequence.
MANDATORY:
Reference Set the input reference multi-FASTA filename
Query Set the input query multi-FASTA filename
--mum Use anchor matches that are unique in both the
reference
and query
--mumcand Same as --mumreference
--mumreference Use anchor matches that are unique in in the
reference
but not necessarily unique in the query (default
behavior)
--maxmatch Use all anchor matches regardless of their uniqueness
-b|breaklen Set the distance an alignment extension will attempt
to
extend poor scoring regions before giving up (default
200)
-c|mincluster Sets the minimum length of a cluster of matches
(default 65)
--[no]delta Toggle the creation of the delta file (default
--delta)
--depend Print the dependency information and exit
-d|diagfactor Set the clustering diagonal difference separation
factor
(default 0.12)
--[no]extend Toggle the cluster extension step (default --extend)
-f
--forward Use only the forward strand of the Query sequences
-g|maxgap Set the maximum gap between two adjacent matches in a
cluster (default 90)
-h
--help Display help information and exit
-l|minmatch Set the minimum length of a single match (default 20)
-o
--coords Automatically generate the original NUCmer1.1 coords
output file using the ’show-coords’ program
--[no]optimize Toggle alignment score optimization, i.e. if an
alignment
extension reaches the end of a sequence, it will
backtrack
to optimize the alignment score instead of
terminating the
alignment at the end of the sequence (default
--optimize)
-p|prefix Set the prefix of the output files (default "out")
-r
--reverse Use only the reverse complement of the Query
sequences
--[no]simplify Simplify alignments by removing shadowed clusters.
Turn
this option off if aligning a sequence to itself to
look
for repeats (default --simplify)
promer
promer generates amino acid alignments between two mutli-FASTA DNA
input
files. Two output files are generated. The .cluster output file
lists
clusters of matches between each sequence. The .delta file lists
the
distance between insertions and deletions that produce maximal
scoring
alignments between each sequence. The DNA input is translated into
all 6
reading frames in order to generate the output, but the output
coordinates
reference the original DNA input.
MANDATORY:
Reference Set the input reference multi-FASTA DNA file
Query Set the input query multi-FASTA DNA file
--mum Use anchor matches that are unique in both the
reference
and query
--mumcand Same as --mumreference
--mumreference Use anchor matches that are unique in in the
reference
but not necessarily unique in the query (default
behavior)
--maxmatch Use all anchor matches regardless of their uniqueness
-b|breaklen Set the distance an alignment extension will attempt
to
extend poor scoring regions before giving up,
measured in
amino acids (default 60)
-c|mincluster Sets the minimum length of a cluster of matches,
measured in
amino acids (default 20)
--[no]delta Toggle the creation of the delta file (default
--delta)
--depend Print the dependency information and exit
-d|diagfactor Set the clustering diagonal difference separation
factor
(default .11)
--[no]extend Toggle the cluster extension step (default --extend)
-g|maxgap Set the maximum gap between two adjacent matches in a
cluster, measured in amino acids (default 30)
-l|minmatch Set the minimum length of a single match, measured in
amino
acids (default 6)
-m|masklen Set the maximum bookend masking lenth, measured in
amino
acids (default 8)
-o
--coords Automatically generate the original PROmer1.1
".coords"
output file using the "show-coords" program
--[no]optimize Toggle alignment score optimization, i.e. if an
alignment
extension reaches the end of a sequence, it will
backtrack
to optimize the alignment score instead of
terminating the
alignment at the end of the sequence (default
--optimize)
-p|prefix Set the prefix of the output files (default "out")
-x|matrix Set the alignment matrix number to 1 [BLOSUM 45],
2 [BLOSUM 62] or 3 [BLOSUM 80] (default 2)
repeat-match Find all maximal exact matches in <genome-file>
-E Use exhaustive (slow) search to find matches
-f Forward strand only, don’t use reverse complement
-n # Set minimum exact match length to #
-t Only output tandem repeats
-V # Set level of verbose (debugging) printing to #
show-aligns
-h Display help information
-q Sort alignments by the query start coordinate
-r Sort alignments by the reference start coordinate
-w int Set the screen width - default is 60
-x int Set the matrix type - default is 2 (BLOSUM 62),
other options include 1 (BLOSUM 45) and 3 (BLOSUM 80)
note: only has effect on amino acid alignments
show-coords
-b Merges overlapping alignments regardless of match dir
or frame and does not display any idenitity information.
-B Switch output to btab format
-c Include percent coverage information in the output
-d Display the alignment direction in the additional
FRM columns (default for promer)
-g Deprecated option. Please use ’delta-filter’ instead
-h Display help information
-H Do not print the output header
-I float Set minimum percent identity to display
-k Knockout (do not display) alignments that overlap
another alignment in a different frame by more than 50%
of their length, AND have a smaller percent similarity
or are less than 75% of the size of the other alignment
(promer only)
-l Include the sequence length information in the output
-L long Set minimum alignment length to display
-o Annotate maximal alignments between two sequences, i.e.
overlaps between reference and query sequences
-q Sort output lines by query IDs and coordinates
-r Sort output lines by reference IDs and coordinates
-T Switch output to tab-delimited format
Input is the .delta output of either the "nucmer" or the "promer"
program passed on the command line.
Output is to stdout, and consists of a list of coordinates, percent
identity, and other useful information regarding the alignment data
contained in the .delta file used as input.
NOTE: No sorting is done by default, therefore the alignments will be
ordered as found in the <deltafile> input.
show-snps
-C Do not report SNPs from alignments with an ambiguous
mapping, i.e. only report SNPs where the [R] and [Q]
columns equal 0 and do not output these columns
-h Display help information
-H Do not print the output header
-I Do not report indels
-l Include sequence length information in the output
-q Sort output lines by query IDs and SNP positions
-r Sort output lines by reference IDs and SNP positions
-S Specify which alignments to report by passing
’show-coords’ lines to stdin
-T Switch to tab-delimited format
-x int Include x characters of surrounding SNP context in the
output, default 0
Input is the .delta output of either the nucmer or promer program
passed on the command line.
Output is to stdout, and consists of a list of SNPs (or amino acid
substitutions for promer) with positions and other useful info. Output
will be sorted with -r by default and the [BUFF] column will always
refer to the sequence whose positions have been sorted. This value
specifies the distance from this SNP to the nearest mismatch (end of
alignment, indel, SNP, etc) in the same alignment, while the [DIST]
column specifies the distance from this SNP to the nearest sequence
end. SNPs for which the [R] and [Q] columns are greater than 0 should
be evaluated with caution, as these columns specify the number of other
alignments which overlap this position. Use -C to assure SNPs are only
reported from unique alignment regions.
show-tiling
-a Describe the tiling path by printing the tab-delimited
alignment region coordinates to stdout
-c Assume the reference sequences are circular, and allow
tiled contigs to span the origin
-g int Set maximum gap between clustered alignments [-1,
INT_MAX]
A value of -1 will represent infinity
(nucmer default = 1000)
(promer default = -1)
-i float Set minimum percent identity to tile [0.0, 100.0]
(nucmer default = 90.0)
(promer default = 55.0)
-l int Set minimum length contig to report [-1, INT_MAX]
A value of -1 will represent infinity
(common default = 1)
-p file Output a pseudo molecule of the query contigs to ’file’
-R Deal with repetitive contigs by randomly placing them
in one of their copy locations (implies -V 0)
-t file Output a TIGR style contig list of each query sequence
that sufficiently matches the reference (non-circular)
-u file Output the tab-delimited alignment region coordinates
of the unusable contigs to ’file’
-v float Set minimum contig coverage to tile [0.0, 100.0]
(nucmer default = 95.0) sum of individual alignments
(promer default = 50.0) extent of syntenic region
-V float Set minimum contig coverage difference [0.0, 100.0]
i.e. the difference needed to determine one alignment
is ’better’ than another alignment
(nucmer default = 10.0) sum of individual alignments
(promer default = 30.0) extent of syntenic region
-x Describe the tiling path by printing the XML contig
linking information to stdout
Input is the .delta output of the nucmer program, run on very similar
sequence data, or the .delta output of the promer program, run on
divergent sequence data.
Output is to stdout, and consists of the predicted location of each
aligning query contig as mapped to the reference sequences. These
coordinates reference the extent of the entire query contig, even when
only a certain percentage of the contig was actually aligned (unless
the -a option is used). Columns are, start in ref, end in ref, distance
to next contig, length of this contig, alignment coverage, identity,
orientation, and ID respectively.
SEE ALSO
http://mummer.sourceforge.net/
Open source MUMmer 3.0 is described in
Versatile and open software for comparing large genomes. S. Kurtz, A.
Phillippy, A.L. Delcher, M. Smoot, M. Shumway, C. Antonescu, and S.L.
Salzberg, Genome Biology (2004), 5:R12.
AUTHOR
mummer was written by S. Kurtz, A. Phillippy, A.L. Delcher, M. Smoot,
M. Shumway, C. Antonescu, and S.L. Salzberg.
May 21, 2005 MUMMER(1)