NAME
byobu - wrapper script for seeding a user's byobu configuration and
launching screen
DESCRIPTION
byobu is a script that launches GNU screen in the byobu configuration.
This enables the display of system information and status notifications
within two lines at the bottom of the screen session. It also enables
multiple tabbed terminal sessions, accessible through simple
keystrokes.
STATUS NOTIFICATIONS
byobu supports a number of unique and interesting status notifications
across the lowest two lines in the screen. Each status notification
item is independently configurable, enabled and disabled by the
configuration utility. The guide below helps identify each status item
(in alphabetical order):
apport - symbol displayed if there are pending crash reports; {!}
symbol displayed on the lower bar toward the left, in black on an
orange background
arch - system architecture; displayed on the lower bar toward the left,
in the default text color on the default background color
battery - battery information; display on the lower bar toward the
right; |-| indicates discharging, |+| indicates charging, |=| indicates
fully charged; when charging or discharging, the current battery
capacity as a percentage is displayed; the colours green, yellow, and
red are used to give further indication of the battery's charge state
services - users can configure a list of services to monitor, define
the SERVICES variable in $HOME/.byobu/status, a whitespace separated of
services, each service should include the init name of the service,
then a pipe, and then an abbreviated name or symbol to display when
running; displayed in the lower bar toward the center in cyan on a
white background
cpu_count - the number of cpu's or cores on the system; displayed in
the lower bar toward the right in the default text color on the default
background, followed by a trailing 'x'
cpu_freq - the current frequency of the cpu in GHz; displayed in the
lower bar toward the right in white text on a light blue background
cpu_temp - the cpu temperature in Celsius (default) or Fahrenheit,
configure TEMP=F or TEMP=C in $HOME/.byobu/statusrc; displayed in the
lower bar toward the right in yellow text on a black background; you
may override the detected cpu temperature device by setting
MONITORED_TEMP=/proc/acpi/whatever in $HOME/.byobu/statusrc
custom - user defined custom scripts; must be executable programs of
any kind in $HOME/.byobu/bin; must be named N_NAME, where N is the
frequency in seconds to refresh the status indicator, and NAME is the
name of the script; N should not be less than 5 seconds; script should
echo a small amount of text to standard out, standard error is
discared; the indicator will be displayed in the lower panel, in
inverted colors to your current background/foreground scheme, unless
you manually specify the colors in your script's output; BEWARE, cpu-
intensive custom scripts may impact your overall system performance and
could upset your system administrator!
Example: ~/.byobu/bin/1000_uname
#!/bin/sh
printf "\005{= bw}%s\005{-}" "$(uname -r)"
date - the system date in YYYY-MM-DD formate; displayed in the lower on
the far right in the default text color on the default background
disk - total disk space available and total used on / directory;
displayed in the lower bar on the far right in white text on a light
purple background; override the default directory by specifying an
alternate mount point with MONITORED_DISK=/wherever in
$HOME/.byobu/statusrc
disk_io - instantaneous read/write througput in kB/s or MB/s over the
last 3 seconds; displayed in the lower bar toward the right in white
text on a light purple background with a leading '<' sign indicating
'read speed' and '>' sign indicating 'write speed'; override the
default monitored disk by specifying an alternate device with
MONITORED_disk=/dev/sdb in $HOME/.byobu/statusrc
ec2_cost - an estimation of the cost of the current boot of the system
in terms of the Amazon EC2 billing model; displayed in the lower bar
toward the right in green text on a black background; there is a
leading '~' to indicate that this is an estimation, and the monetary
units are US Dollars '$'
rcs_cost - an estimation of the cost of the current boot of the system
in terms of the Rackspace Cloud Server billing model; displayed in the
lower bar toward the right in green text on a black background; there
is a leading '~' to indicate that this is an estimation, and the
monetary units are US Dollars '$'
fan_speed - cpu or system fan speed as reported by lm-sensors;
displayed in the lower bar toward the right in black text on a grey
background; there is a trailing 'rpm' for units
hostname - the hostname of the system; displayed in the upper bar on
the far right in bold black text on a grey background; there is a
leading '@' symbol if the username status is also enabled
ip_address - the ip address of the system in dotted decimal form;
displayed in the upper bar on the far right in bold black text on a
grey background
load_average - the system load average over the last 1 minute;
displayed in the lower bar toward the right in black text on a yellow
background
logo - an approximation of the current operating system's logo;
displayed in the lower bar on the far left; you may customize this logo
by setting a chosen logo in $HOME/.byobu/logo, or you may override this
with LOGO=:-D in $HOME/.byobu/statusrc
mail - system mail for the current user; the letter '[M]' is displayed
in the lower bar toward the left in black text on a grey background
mem_available - total memory available in the system; displayed in the
lower bar toward the right in white text on a green background
mem_used - total memory used in the system as a percentage of the total
memory available; displayed in the lower bar toward the right in white
text on a green background with a trailing '%' sign
menu - a simple indicator directing new users to use the F9 keybinding
to access the byobu menu
network - instantaneous upload/download bandwidth in kB/s over the last
3 seconds; displayed in the lower bar toward the right in white text on
a purple background with a leading '^' sign indicating 'up' and 'v'
sign indicating 'down'; override the default interface by specifying an
alternate interface with MONITORED_NETWORK=eth1, and override the
default units (kB/s) with NETWORK_UNITS=bits in $HOME/.byobu/statusrc
processes - total number of processes running on the system; displayed
in the lower bar in white text on a dark yellow background with a
trailing '&' indicating 'background processes'
reboot_required - symbol present if a reboot is required following a
system update; displayed in the lower bar white text on a blue
background by the symbol '(R)'; additionally, reboot_required will
print '<F5>' in white text on a blue background, if Byobu requires you
to reload your profile to affect some changes.
release - distribution and version information about the release
running on the current system as reported by lsb_release(1) or
/etc/issue; displayed in the lower bar in bold black text toward the
left on a grey background; you may override the detected release with
DISTRO=Whatever in $HOME/.byobu/statusrc
time - the system time in HH:MM:SS format; displayed in the lower bar
on the far right in the default text and default background colors
time_utc - the UTC system time in HH:MMformat; displayed in the lower
bar on the far right in dark text on a light background
updates_available - the number of updates available on the system;
displayed in the lower bar toward the right in white text on a red
background with a trailing '!' sign; if any updates are marked
'security updates', then there will be a total of two trailing
exclamation points, '!!'
uptime - the total system uptime since last boot; displayed in the
lower bar toward the right in blue text on a grey background
users - the number of remote users logged into the system via sshd,
empty if 0 users; displayed in the lower bar toward the right in red
text on a grey background with a trailing '#' sign
whoami - the name of the user who owns the screen session; displayed in
the upper bar toward the far right in bold black text on a grey
background
wifi_quality - the connection rate and signal quality of the wifi
connection; displayed in the lower bar toward the right in black text
on a cyan background; the connection rate is in 'Mb/s' and the signal
quality is as a percentage with a trailing '%'
WINDOWS
Each open window in the screen session is displayed in the upper bar
toward the far left. These are numbered, and include indicators as to
activity in the window (see "activity" in screen(1) for symbol
definitions). The current active window is highlighted by inverting
the background/text from the rest of the window bar.
Users can create a list of windows to launch at startup in
~/.byobu/windows. This file is the same syntax as ~/.screenrc, each
line specifying a window using the "screen" command, as described in
screen(1).
User can also launch Byobu with unique window sets. Users can store
these as ~/.byobu/windows.[NAME], and launch Byobu with the environment
variable BYOBU_WINDOWS.
For example:
$ cat ~/.byobu/windows.ssh_sessions
screen -t localhost bash
screen -t aussie ssh root@aussie
screen -t beagle ssh root@beagle
screen -t collie ssh root@collie
$ BYOBU_WINDOWS=ssh_sessions byobu
UNITS OF MEASURE
byobu uses binary for measurements rather than decimal for KB, MB, and
GB. This means multiples of 1024 rather than multiples of 1000, in
accordance with JEDEC Standard 100B.01.
KEYBINDINGS
byobu keybindings can be user defined in /usr/share/byobu/keybindings/
(or within .screenrc if byobu-export was used). The common key bindings
are:
F2 - Create a new window
F3 - Move to previous window
F4 - Move to next window
F5 - Reload profile
F6 - Detach from this session
F7 - Enter copy/scrollback mode
F8 - Re-title a window
F9 - Configuration Menu
F12 - Lock this terminal
Ctrl-a $ - show detailed status
Ctrl-a R - Reload profile
Ctrl-a ! - Toggle key bindings on and off
Ctrl-a k - Kill the current window
Ctrl-a ~ - Write the current window's scrollback buffer to
/var/run/screen/S-$USER/byobu-exchange
BUGS
PuTTY users have reported that the F2, F3, and F4 shortcut keys are not
working properly. PuTTY sends the same escape sequences as the linux
console for F1-F4 by default. You can fix this problem in the PuTTY
config, Terminal -> Keyboard -> Function keys: Xterm R6. See:
http://www.mail-archive.com/screen-users@gnu.org/msg015.html
Mac OSX terminal users have reported 'flashing text'. You can fix this
in the advanced settings of the terminal application, with 'Declare
Terminal As: xterm-color'.
SEE ALSO
screen(1), byobu-config, byobu-export, byobu-status, byobu-status-
detail
http://launchpad.net/byobu
AUTHOR
This manpage and the utility was written by Dustin Kirkland
<kirkland@canonical.com> for Ubuntu systems (but may be used by
others). Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU General Public License, Version 3
published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License
can be found in /usr/share/common-licenses/GPL.