Man Linux: Main Page and Category List

NAME

       VisualBoyAdvance - VisualBoyAdvance

DESCRIPTION

       VisualBoyAdvance [option ...] file

OPTIONS

       -1, --video-1x
              1x

       -2, --video-2x
              2x

       -3, --video-3x
              3x

       -4, --video-4x
              4x

       -F, --fullscreen
              Full screen

       -G, --gdb=PROTOCOL
              GNU  Remote Stub mode: tcp      - use TCP at port 55555 tcp:PORT
              - use TCP at port PORT pipe     - use pipe transport

       -N, --no-debug
              Don’t parse debug information

       -S, --flash-size=SIZE
              Set the Flash size

       --flash-64k
              0 -  64K Flash

       --flash-128k
              1 - 128K Flash

       -T, --throttle=THROTTLE
              Set the desired throttle (5...1000)

       -Y, --yuv=TYPE
              Use YUV overlay for drawing: 0 - YV12 1 - UYVY 2 - YVYU 3 - YUY2
              4 - IYUV

       -b, --bios=BIOS
              Use given bios file

       -c, --config=FILE
              Read the given configuration file

       -d, --debug
              Enter debugger

       -f, --filter=FILTER
              Select filter:

       --filter-normal
              0 - normal mode

       --filter-tv-mode
              1 - TV Mode

       --filter-2xsai
              2 - 2xSaI

       --filter-super-2xsai
              3 - Super 2xSaI

       --filter-super-eagle
              4 - Super Eagle

       --filter-pixelate
              5 - Pixelate

       --filter-motion-blur
              6 - Motion Blur

       --filter-advmame
              7 - AdvanceMAME Scale2x

       --filter-simple2x
              8 - Simple2x

       --filter-bilinear
              9 - Bilinear

       --filter-bilinear+
              10 - Bilinear Plus

       --filter-scanlines
              11 - Scanlines

       --filter-hq2x
              12 - hq2x

       --filter-lq2x
              13 - lq2x

       -h, --help
              Print this help

       -i, --ips=PATCH
              Apply given IPS patch

       -p, --profile=[HERTZ]
              Enable profiling

       -s, --frameskip=FRAMESKIP
              Set frame skip (0...9)

       -t, --save-type=TYPE
              Set the available save type

       --save-auto
              0 - Automatic (EEPROM, SRAM, FLASH)

       --save-eeprom
              1 - EEPROM

       --save-sram
              2 - SRAM

       --save-flash
              3 - FLASH

       --save-sensor
              4 - EEPROM+Sensor

       --save-none
              5 - NONE

       -v, --verbose=VERBOSE
              Set  verbose  logging  (trace.log)  1 - SWI 2 - Unaligned memory
              access 4 - Illegal memory write 8 - Illegal memory read

              16 - DMA 0 32 - DMA 1 64 - DMA 2

              128 - DMA 3 256 - Undefined instruction 512 - AGBPrint messages

   Long options only:
       --agb-print
              Enable AGBPrint support

       --auto-frameskip
              Enable auto frameskipping

       --ifb-none
              No interframe blending

       --ifb-motion-blur
              Interframe motion blur

       --ifb-smart
              Smart interframe blending

       --no-agb-print
              Disable AGBPrint support

       --no-auto-frameskip
              Disable auto frameskipping

       --no-ips
              Do not apply IPS patch

       --no-mmx
              Disable MMX support

       --no-pause-when-inactive Don’t pause when inactive

       --no-rtc
              Disable RTC support

       --no-show-speed
              Don’t show emulation speed

       --no-throttle
              Disable thrrotle

       --pause-when-inactive
              Pause when inactive

       --rtc  Enable RTC support

       --show-speed-normal
              Show emulation speed

       --show-speed-detailed
              Show detailed speed data

       -1, --video-1x
              1x

       -2, --video-2x
              2x

       -3, --video-3x
              3x

       -4, --video-4x
              4x

       -F, --fullscreen
              Full screen

       -G, --gdb=PROTOCOL
              GNU Remote Stub mode: tcp      - use TCP at port 55555  tcp:PORT
              - use TCP at port PORT pipe     - use pipe transport

       -N, --no-debug
              Don’t parse debug information

       -S, --flash-size=SIZE
              Set the Flash size

       --flash-64k
              0 -  64K Flash

       --flash-128k
              1 - 128K Flash

       -T, --throttle=THROTTLE
              Set the desired throttle (5...1000)

       -Y, --yuv=TYPE
              Use YUV overlay for drawing: 0 - YV12 1 - UYVY 2 - YVYU 3 - YUY2
              4 - IYUV

       -b, --bios=BIOS
              Use given bios file

       -c, --config=FILE
              Read the given configuration file

       -d, --debug
              Enter debugger

       -f, --filter=FILTER
              Select filter:

       --filter-normal
              0 - normal mode

       --filter-tv-mode
              1 - TV Mode

       --filter-2xsai
              2 - 2xSaI

       --filter-super-2xsai
              3 - Super 2xSaI

       --filter-super-eagle
              4 - Super Eagle

       --filter-pixelate
              5 - Pixelate

       --filter-motion-blur
              6 - Motion Blur

       --filter-advmame
              7 - AdvanceMAME Scale2x

       --filter-simple2x
              8 - Simple2x

       --filter-bilinear
              9 - Bilinear

       --filter-bilinear+
              10 - Bilinear Plus

       --filter-scanlines
              11 - Scanlines

       --filter-hq2x
              12 - hq2x

       --filter-lq2x
              13 - lq2x

       -h, --help
              Print this help

       -i, --ips=PATCH
              Apply given IPS patch

       -p, --profile=[HERTZ]
              Enable profiling

       -s, --frameskip=FRAMESKIP
              Set frame skip (0...9)

       -t, --save-type=TYPE
              Set the available save type

       --save-auto
              0 - Automatic (EEPROM, SRAM, FLASH)

       --save-eeprom
              1 - EEPROM

       --save-sram
              2 - SRAM

       --save-flash
              3 - FLASH

       --save-sensor
              4 - EEPROM+Sensor

       --save-none
              5 - NONE

       -v, --verbose=VERBOSE
              Set verbose logging (trace.log) 1 - SWI  2  -  Unaligned  memory
              access 4 - Illegal memory write 8 - Illegal memory read

              16 - DMA 0 32 - DMA 1 64 - DMA 2

              128 - DMA 3 256 - Undefined instruction 512 - AGBPrint messages

   Long options only:
       --agb-print
              Enable AGBPrint support

       --auto-frameskip
              Enable auto frameskipping

       --ifb-none
              No interframe blending

       --ifb-motion-blur
              Interframe motion blur

       --ifb-smart
              Smart interframe blending

       --no-agb-print
              Disable AGBPrint support

       --no-auto-frameskip
              Disable auto frameskipping

       --no-ips
              Do not apply IPS patch

       --no-mmx
              Disable MMX support

       --no-pause-when-inactive Don’t pause when inactive

       --no-rtc
              Disable RTC support

       --no-show-speed
              Don’t show emulation speed

       --no-throttle
              Disable thrrotle

       --pause-when-inactive
              Pause when inactive

       --rtc  Enable RTC support

       --show-speed-normal
              Show emulation speed

       --show-speed-detailed
              Show detailed speed data