Man Linux: Main Page and Category List

NAME

       pbuilder-uml.conf  -  configuration  file  for  user-mode-linux port of
       pbuilder

DESCRIPTION

       /etc/pbuilder/pbuilder-uml.conf  contains  default   values   used   in
       pbuilder-user-mode-linux program invocation.

FORMAT

       MY_ETH0=tuntap,,,192.168.0.2
              Configures  ethernet  setting  used  for booting linux.  See how
              rootstrap boots your system, and copy that.

              Specify --eth0=slirp,12345,/usr/bin/slirp-fullbolt  to  use  the
              slirp connection.

       UML_IP=192.168.0.3
              IP address to use for guest OS.

              This can be set to dhcp for obtaining IP address through DHCP.

       UML_NETMASK=255.255.255.0
              Guest OS netmask

       UML_NETWORK=192.168.0.0
              Guest OS network

       UML_BROADCAST=255.255.255.255
              Guest OS broadcast

       UML_GATEWAY=192.168.0.1
              Guest OS gateway

       PBUILDER_UML_IMAGE=${HOME}/uml-image
              Guest OS file system image.

       UML_MOUNT_TMPFS=no
              Whether to mount tmpfs inside the guest image.  This is probably
              mostly useless.

       BUILDPLACE=${HOME}/tmp/
              The location which build will take  place.   pbuilder-user-mode-
              linux will place temporary COW files to there.  The user running
              UML needs to be able to access that directory.

       UML_MEM=128
              The amount of memory allowed for UML.  Give more value to  here.

       UML_HOSTNAME=uml-host
              The hostname for the UML.

              The  hostname should be available in /etc/hosts so that hostname
              -f will be able to return the FQDN.

       UML_BUILDRESULT=/directory/of/build/result
              The directory where build result of pbuilder-user-mode-linux  is
              stored.

       ROOTSTRAP_IMAGESIZE=size-in-megabytes
              The  size, in MB, of the disk iamge to create. Defaults to 1000.

NOTES

       It is advised to set APTCACHEHARDLINK  to  no  in  ~/.pbuilderrc.   see
       pbuilderrc(5) for details.

AUTHOR

       Initial  coding,  and  main  maintenance  is  done  by  Junichi  Uekawa
       <dancer@debian.org>.

       The homepage is available at http://pbuilder.alioth.debian.org

FILES

       /etc/pbuilder/pbuilder-uml.conf, ${HOME}/.pbuilderrc

SEE ALSO

       /usr/share/doc/pbuilder/pbuilder-doc.html, pbuilder-user-mode-linux(1),
       pbuilder(8), pbuilderrc(5), pdebuild(1)