Man Linux: Main Page and Category List


       array-info - check the status of a HP (Compaq) SmartArray controller


       array-info -d array_device_path [-a|-l|-A|-c|-s|-L|-h]


       Array-info  is a command line tool to retrieve informations and logical
       drives status from several RAID controllers (currently  HP  Compaq  IDA
       and CISS and MD).  It displays informations about the firmware version,
       Rom revision, number of physical and logical drives on the  controller,
       aswell  as  the  fault  tolerance,  size,  number of physical disks and
       status for each logical drive.


       --device | -d
              Path to array device, e.g. /dev/ida/c0d0 or /dev/cciss/c0d1

       --all-drives | -a
              Show informations about all drives

       --logical drive | -l
              Show informations about selected logical drive

       --show-ctrl | -c
              Show informations about controller

       --show-logical | -L
              Show informations about logical drives

       --show-physical | -p
              Show physical device informations

       --show-status | -s
              Show status of logical drives

       --show-all | -A
              Show all informations

       --version | -V
              Show version

       -h     Show help about options


       This manual page was written by Raphaƫl Pinson  <<>>.
       Permission  is  granted to copy, distribute and/or modify this document
       under the terms of the GNU General Public License,  Version  2  or  any
       later version published by the Free Software Foundation.

                                  2006-12-15                     array-info(1)