NAME
ocf_heartbeat_iscsi - Manages a local iSCSI initiator and its
connections to iSCSI targets
SYNOPSIS
iscsi [start | stop | status | monitor | validate-all | methods |
meta-data]
DESCRIPTION
OCF Resource Agent for iSCSI. Add (start) or remove (stop) iSCSI
targets.
SUPPORTED PARAMETERS
portal
The iSCSI portal address in the form:
{ip_address|hostname}[":"port] (required, string, no default)
target
The iSCSI target. (required, string, no default)
discovery_type
Discovery type. Currently, with open-iscsi, only the sendtargets
type is supported. (optional, string, default sendtargets)
iscsiadm
iscsiadm program path. (optional, string, no default)
udev
If the next resource depends on the udev creating a device then we
wait until it is finished. On a normally loaded host this should be
done quickly, but you may be unlucky. If you are not using udev set
this to "no", otherwise we will spin in a loop until a timeout
occurs. (optional, string, default yes)
SUPPORTED ACTIONS
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 120.
stop
Stops the resource. Suggested minimum timeout: 120.
status
Performs a status check. Suggested minimum timeout: 30.
monitor
Performs a detailed status check. Suggested minimum timeout: 30.
Suggested interval: 120.
validate-all
Performs a validation of the resource configuration. Suggested
minimum timeout: 5.
methods
Suggested minimum timeout: 5.
meta-data
Retrieves resource agent metadata (internal use only). Suggested
minimum timeout: 5.
EXAMPLE
The following is an example configuration for a iscsi resource using
the crm(8) shell:
primitive example_iscsi ocf:heartbeat:iscsi \
params \
portal=string \
target=string \
op monitor depth="0" timeout="30" interval="120"
SEE ALSO
http://www.linux-ha.org/wiki/iscsi_(resource_agent)
AUTHOR
Linux-HA contributors (see the resource agent source for information
about individual authors)