Man Linux: Main Page and Category List

NAME

       <compat/deprecated.h>: Deprecated items -

   Allowing specific system-wide interrupts
        In addition to globally enabling interrupts, each device's particular
       interrupt needs to be enabled separately if interrupts for this device
       are desired. While some devices maintain their interrupt enable bit
       inside the device's register set, external and timer interrupts have
       system-wide configuration registers.

       Example:

           // Enable timer 1 overflow interrupts.
           timer_enable_int(_BV(TOIE1));

           // Do some work...

           // Disable all timer interrupts.
           timer_enable_int(0);

       Note:
           Be careful when you use these functions. If you already have a
           different interrupt enabled, you could inadvertantly disable it by
           enabling another intterupt.

       static __inline__ void timer_enable_int (unsigned char ints)
       #define enable_external_int(mask)   (__EICR = mask)
       #define INTERRUPT(signame)
       #define __INTR_ATTRS   used

   Obsolete IO macros
        Back in a time when AVR-GCC and avr-libc could not handle IO port
       access in the direct assignment form as they are handled now, all IO
       port access had to be done through specific macros that eventually
       resulted in inline assembly instructions performing the desired action.

       These macros became obsolete, as reading and writing IO ports can be
       done by simply using the IO port name in an expression, and all bit
       manipulation (including those on IO ports) can be done using generic C
       bit manipulation operators.

       The macros in this group simulate the historical behaviour. While they
       are supposed to be applied to IO ports, the emulation actually uses
       standard C methods, so they could be applied to arbitrary memory
       locations as well.
       #define inp(port)   (port)
       #define outp(val, port)   (port) = (val)
       #define inb(port)   (port)
       #define outb(port, val)   (port) = (val)
       #define sbi(port, bit)   (port) |= (1 << (bit))
       #define cbi(port, bit)   (port) &= ~(1 << (bit))

Detailed Description

       This header file contains several items that used to be available in
       previous versions of this library, but have eventually been deprecated
       over time.

        #include <compat/deprecated.h>

       These items are supplied within that header file for backward
       compatibility reasons only, so old source code that has been written
       for previous library versions could easily be maintained until its end-
       of-life. Use of any of these items in new code is strongly discouraged.

Define Documentation

   #define cbi(port, bit)   (port) &= ~(1 << (bit)) Deprecated
       Clear bit in IO port port.

   #define enable_external_int(mask)   (__EICR = mask) Deprecated
       This macro gives access to the GIMSK register (or EIMSK register if
       using an AVR Mega device or GICR register for others). Although this
       macro is essentially the same as assigning to the register, it does
       adapt slightly to the type of device being used. This macro is
       unavailable if none of the registers listed above are defined.

   #define inb(port)   (port) Deprecated
       Read a value from an IO port port.

   #define inp(port)   (port) Deprecated
       Read a value from an IO port port.

   #define INTERRUPT(signame) Value:
       void signame (void) __attribute__ ((interrupt,__INTR_ATTRS));      void signame (void)
       Deprecated

       Introduces an interrupt handler function that runs with global
       interrupts initially enabled. This allows interrupt handlers to be
       interrupted.

       As this macro has been used by too many unsuspecting people in the
       past, it has been deprecated, and will be removed in a future version
       of the library. Users who want to legitimately re-enable interrupts in
       their interrupt handlers as quickly as possible are encouraged to
       explicitly declare their handlers as described above.

   #define outb(port, val)   (port) = (val) Deprecated
       Write val to IO port port.

   #define outp(val, port)   (port) = (val) Deprecated
       Write val to IO port port.

   #define sbi(port, bit)   (port) |= (1 << (bit)) Deprecated
       Set bit in IO port port.

Function Documentation

   static __inline__ void timer_enable_int (unsigned char ints) [static]
       Deprecated
       This function modifies the timsk register. The value you pass via ints
       is device specific.

Author

       Generated automatically by Doxygen for avr-libc from the source code.

Version 1.6.8                   Thu <compat/deprecated.h>: Deprecated items(3)