pcscd - PC/SC Smart Card Daemon
log APDUs and SW using the debug method (see --debug).
-c, --config file
Specifies the file file as an alternate location for
Runs pcscd in the foreground and sends log messages to stderr
instead of syslog(3).
use the lowest log level. Any log message of this level or above
will be sent to stderr or syslog(3) depending on the use of
--info use info log level. This is the default log level.
use error log level.
use critical log level.
The log levels are ordered as: debug < info < error < critical. Use a
log level l will log this level and all the levels above it.
Displays information about the pcscd command line
Displays the program version number
Ask pcscd to rescan the USB buses for added or removed readers
and re-read the /var/lib/pcscd/reader.conf file to detect added
or removed non-USB readers (serial or PCMCIA).
pcscd is the daemon program for pcsc-lite and the MuscleCard framework.
It is a resource manager that coordinates communications with smart
card readers and smart cards and cryptographic tokens that are
connected to the system.
pcscd is normally started at boot time from /usr/etc/init.d/pcscd. It
allows applications to access smart cards and readers without knowing
details of the card or reader.
pcscd coordinates the loading of drivers for card readers.
The purpose of pcsc-lite is to provide a cross compatible API (called
winscard) for migrating Windows based PC/SC applications to Unix.
At startup, pcscd loads the smart card reader drivers specified in the
/var/lib/pcscd/reader.conf file (or specified using --config file).
SERIAL SMART CARD READER DRIVERS
Smart card reader drivers are placed in the /usr/lib/pcsc/drivers
directory. Each driver is simply an .so file. pcscd locates the driver
using the /var/lib/pcscd/reader.conf file. See the reader.conf(5)
manual page for more information. Drivers are available at
USB SMART CARD READER DRIVERS
USB smart card reader drivers are located in /usr/lib/pcsc/drivers
directory as a bundle. You shall not add a USB driver in
/var/lib/pcscd/reader.conf : Reader configuration file
/usr/etc/init.d/pcscd : pcscd startup script
/var/run/pcscd/pcscd.pid : process id of the running pcscd
/usr/lib/pcsc/drivers : directory containing bundles for USB drivers
bundleTool(8), reader.conf(5), syslog(3)
David Corcoran <firstname.lastname@example.org> and Ludovic Rousseau