NAME
fxstest - Simple tests for DAHDI FXS adapters
SYNOPSIS
fxstest /dev/dahdi/N comand
DESCRIPTION
fxstest can be used to issue one of a number simple tests to FXS
adapters (analog adapters intended to connect phones).
OPTIONS
All of those tests operate on a single dahdi channel which has to be an
FXS port, and must not be in use by Asterisk or any other program.
The command has two mandatory parameters. The first parameter is the
device file to operate on. It is typically /dev/dahdi/NN , a device
file under /dev/dahdi .
The second parameter is the name of the command to run on that channel:
stats
Reports voltages
regdump
Dumps ProSLIC registers
tones
Plays a series of tones
polarity
Requests channel to reverse polarity.
ring
Rings phone
SEE ALSO
dahdi_tool(8), dahdi_cfg(8), dahdi_monitor(8), asterisk(8).
BUGS
Does not allow testing channels beyond 249. Should support opening
channels through /dev/dahdi/channel .
AUTHOR
This manual page was written by Tzafrir Cohen
<tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute
and/or modify this document under the terms of the GNU General Public
License, Version 2 any later version published by the Free Software
Foundation.