NAME
eexpress-diag - Diagnostic program for Intel EtherExpress 16
SYNOPSIS
eexpress-diag [options]
DESCRIPTION
eexpress-diag is a programm which you can use to diagnose problems with
your Intel EtherExpress 16 cards.
OPTIONS
These programs follow the usual GNU command line syntax, with long
options starting with two dashes (‘-’). A summary of options is
included below.
-h, --help
Show summary of options.
-V, --version
Show version of program.
-v, --verbose
Verbose mode.
-a, --all
Print all registers.
-p, --base-address <port>
Specify port to use. Valid values are: 0x240, 0x280, 0x2C0,
0x300, 0x320, 0x340, 0x360
-Q, -i, --irq <irq>
Specify new interrupt. Valid values are: 3-5,9-12,15.
-w, --write-EEPROM <values>
Write to the EEPROMS with the specified values.
SEE ALSO
mii-diag(8)
AUTHOR
This manual page was written by Alain Schroeder <alain@debian.org>, for
the Debian GNU/Linux system (but may be used by others).
March 8, 2001