Man Linux: Main Page and Category List

NAME

       udhcpd.conf - udhcp server configuration file

DESCRIPTION

       The  file  /etc/udhcpd.conf contains configuration information specific
       to the udhcp server.  It should contain one configuration  keyword  per
       line, followed by appropriate configuration information.

OPTIONS

       start ADDRESS
              The  starting  address  of  the  IP lease block is ADDRESS.  The
              default is 192.168.0.20.

       end ADDRESS
              The ending address of  the  IP  lease  block  is  ADDRESS.   The
              default is 192.168.0.254.

       interface INTERFACE
              The  udhcp  server  should  listen on INTERFACE.  The default is
              eth0.

       max_leases LEASES
              Offer at most LEASES leases (including those reserved by OFFERs,
              DECLINEs, and ARP conflicts).  The default is 254.

       remaining REMAINING
              If  REMAINING  is  yes, store the time remaining for each lease.
              If it is no, store the expiration  time  for  each  lease.   The
              default is yes.

       auto_time SECONDS
              Write  the  lease  information  to a file every SECONDS seconds.
              The default is 7200.

       decline_time SECONDS
              Reserve an IP for SECONDS seconds if a DHCP decline  message  is
              received.  The default is 3600.

       conflict_time SECONDS
              Reserve  an  IP  for  SECONDS seconds if an ARP conflict occurs.
              The default is 3600.

       offer_time SECONDS
              Reserve an IP for SECONDS seconds if it is offered.  The default
              is 60.

       min_lease SECONDS
              Reserve  an  IP for the full lease time if the lease to be given
              is less than SECONDS seconds.  The default is 60.

       lease_file FILE
              Write  the  lease  information  to   FILE.    The   default   is
              /var/lib/misc/udhcpd.leases.

       pidfile FILE
              Write    the    process    ID   to   FILE.    The   default   is
              /var/run/udhcpd.pid.

       notify_file FILE
              Execute  FILE  after  the  lease  information  is  written.   By
              default, no file is executed.

       siaddr ADDRESS
              BOOTP specific option.  The default is 0.0.0.0.

       sname NAME
              BOOTP specific option.  There is no default.

       boot_file FILE
              BOOTP specific option.  There is no default.

       option OPTION
              DHCP specific option.

              subnet ADDRESS

              timezone OFFSET

              router ADDRESS...

              timesvr ADDRESS...

              namesvr ADDRESS...

              dns ADDRESS...

              logsvr ADDRESS...

              cookiesvr ADDRESS...

              lprsvr ADDRESS...

              hostname HOSTNAME

              bootsize SIZE

              domain DOMAIN

              swapsvr ADDRESS

              rootpath PATH

              ipttl TTL

              mtu MTU

              broadcast ADDRESS

              ntpsrv ADDRESS...

              wins ADDRESS...

              requestip ADDRESS

              lease SECONDS

              dhcptype TYPE

              serverid ADDRESS

              tftp FILE

              wpad URL

              bootfile FILE
                     The  default  for lease is 864000.  There are no defaults
                     for the other options.

SEE ALSO

       udhcpd(8).