Man Linux: Main Page and Category List

NAME

       ipmi_monitoring_sensors.conf - specify sensor interpretation rules

DESCRIPTION

       The  /etc/ipmi_monitoring_sensors.conf  defines how IPMI sensors should
       be   interpreted.   IPMI   based   sensors   specify   a   number    of
       states/thresholds  when they are read. Based on those states/thresholds
       we can allow the  libipmimonitoring(3)  library  and  ipmimonitoring(8)
       tool to report if a sensor reading is "good" or "bad" (or in a NOMINAL,
       WARNING, or CRITICAL state).

       Each of the states listed below are (hopefully) descriptive  enough  to
       describe  the  state  conditions  that may be set/unset for each sensor
       type. For more detailed information on each of  the  individual  states
       listed  below, please see the IPMI Specification "Sensor and Event Code
       Tables".  Ipmi-sensors(8) can be used to determine the sensor types and
       the states/thresholds that exist on a system by outputting very verbose
       output and seeing what types of Assertion  or  Deassertion  events  are
       possible.

       The possible values for all states/thresholds below are:

       Nominal - Signal Nominal reading if state/threshold tripped

       Warning - Signal Warning reading if state/treshold tripped

       Critical - Signal Critical reading if state/threshold tripped

       Not  all  IPMI sensor types and event types are currently supported. If
       you would like more to be supported, please e-mail the FreeIPMI mailing
       list.

       The  default  values  selected  for  individual states/thresholds being
       tripped are based on best guesses and motherboards being analyzed.   If
       you  think  they  should be changed, please e-mail the FreeIPMI mailing
       list to discuss what the defaults should be.

       Most default interpretations can be determined  quite  easily  and  can
       meet   the   needs   of   most   users.   For  example,  a  reading  of
       "Performance_Met" is normally better than "Performance_Lags".  However,
       some   sensors   can   be   ambiguous  and  depend  completely  on  the
       manufacturer. For example, "State_Asserted" vs. "State_Deasserted"  are
       completely  at  the  interpretation of the vendor. Users are advised to
       adjust the interpretations below as needed for their machines.

FORMAT

       The configuration options that can be specified  in  the  configuration
       file  are  listed  below. Each configuration option must be listed on a
       separate line. Arguments for an option are separated by any  amount  of
       whitespace.  Multiple  arguments  are  also  separated  by  whitespace.
       Comments can be marked by using the pound  sign  ("#")  character,  and
       lines can be continued on the next using backslash ("\").

       Note  that  it  is  possible  to  list the username, password and other
       potentially sensitive information in the configuration  file.  If  this
       data  is  stored  in a configuration file, system administrators should
       limit access to this file.

OPTIONS

       IPMI_Threshold_Sensor
              The following  states  correspond  to  threshold  sensors.  This
              normally  applies  to  sensors that measure non-discrete values,
              such as temperatures, voltages, RPM, etc.

              IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Critical_Threshold
                     Defaults to Nominal.

              IPMI_Threshold_Sensor_At_Or_Below_Lower_Critical_Threshold
                     Defaults to Critical.

              IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Recoverable_Threshold
                     Defaults to Critical.

              IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Critical_Threshold
                     Defaults to Nominal.

              IPMI_Threshold_Sensor_At_Or_Above_Upper_Critical_Threshold
                     Defaults to Critical.

              IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Recoverable_Threshold
                     Defaults to Critical.

       IPMI_Voltage_State
              The following states correspond to Voltage sensors  that  report
              an assertion or deassertion.

              IPMI_Voltage_State_Deasserted
                     Defaults to Nominal.

              IPMI_Voltage_State_Asserted
                     Defaults to Warning.

       IPMI_Voltage_Performance
              The  following  states correspond to Voltage sensors that report
              on performance.

              IPMI_Voltage_Performance_Met
                     Defaults to Nominal.

              IPMI_Voltage_Performance_Lags
                     Defaults to Critical.

       IPMI_Fan_Device_Install
              The following states correspond to Fan sensors  that  report  on
              device installation.

              IPMI_Fan_Device_Install_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Fan_Device_Install_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Fan_Transition_Availability
              The  following  states  correspond to Fan sensors that report on
              device availability.

              IPMI_Fan_Transition_Availability_To_Running
                     Defaults to Nominal.

              IPMI_Fan_Transition_Availability_To_In_Test
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Power_Off
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_On_Line
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Off_Line
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Off_Duty
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Degraded
                     Defaults to Critical.

              IPMI_Fan_Transition_Availability_To_Power_Save
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_Install_Error
                     Defaults to Critical.

       IPMI_Fan_Redundancy
              The following states correspond to Fan sensors  that  report  on
              redundancy.

              IPMI_Fan_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Fan_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Processor_State
              The following states correspond to Processor sensors that report
              an assertion or deassertion.

              IPMI_Processor_State_Deasserted
                     Defaults to Nominal.

              IPMI_Processor_State_Asserted
                     Defaults to Critical.

       IPMI_Power_Supply_State
              The following states correspond  to  Power_Supply  sensors  that
              report an assertion or deassertion.

              IPMI_Power_Supply_State_Deasserted
                     Defaults to Critical.

              IPMI_Power_Supply_State_Asserted
                     Defaults to Nominal.

       IPMI_Power_Supply_Redundancy
              The  following  states  correspond  to Power Supply sensors that
              report on redundancy.

              IPMI_Power_Supply_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Power_Supply_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Power_Unit_Device_Install
              The following states  correspond  to  Power  Unit  sensors  that
              report on device installation.

              IPMI_Power_Unit_Device_Install_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Power_Unit_Device_Install_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Power_Unit_Redundancy
              The  following  states  correspond  to  Power  Unit sensors that
              report on redundancy.

              IPMI_Power_Unit_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Power_Unit_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Module_Board_State
              The following states correspond  to  Module/Board  sensors  that
              report an assertion or deassertion.

              IPMI_Module_Board_State_Deasserted
                     Defaults to Nominal.

              IPMI_Module_Board_State_Asserted
                     Defaults to Critical.

       IPMI_Module_Board_Device_Install
              The  following  states  correspond  to Module/Board sensors that
              report on device installation.

              IPMI_Module_Board_Device_Install_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Module_Board_Device_Install_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Drive_Slot_State
              The following states  correspond  to  Drive  Slot  sensors  that
              report an assertion or deassertion.

              IPMI_Drive_Slot_State_Deasserted
                     Defaults to Warning.

              IPMI_Drive_Slot_State_Asserted
                     Defaults to Nominal.

       IPMI_Drive_Slot_Predictive_Failure
              The  following  states  correspond  to  Drive_Slot  sensors that
              report a predictive failure assertion or deassertion.

              IPMI_Drive_Slot_Predictive_Failure_Deasserted
                     Defaults to Nominal.

              IPMI_Drive_Slot_Predictive_Failure_Asserted
                     Defaults to Critical.

       IPMI_Drive_Slot_Device_Install
              The following states  correspond  to  Drive  Slot  sensors  that
              report on device installation.

              IPMI_Drive_Slot_Device_Install_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Drive_Slot_Device_Install_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Button_Switch_State
              The  following  states  correspond to Button/Switch sensors that
              report an assertion or deassertion.

              IPMI_Button_Switch_State_Deasserted
                     Defaults to Nominal.

              IPMI_Button_Switch_State_Asserted
                     Defaults to Nominal.

       IPMI_Entity_Presence_Device_Install
              The following states correspond to Entity Presence sensors  that
              report on device installation.

              IPMI_Entity_Presence_Device_Install_Device_Removed_Device_Absent
                     Defaults to Nominal.

              IPMI_Entity_Presence_Device_Install_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Physical_Security
              The  following states correspond to Physical Security sensors w/
              Physical Security specific output states.

              IPMI_Physical_Security_General_Chassis_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_Drive_Bay_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_IO_Card_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_Processor_Area_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_LAN_Leash_Lost
                     Defaults to Critical.

              IPMI_Physical_Security_Unauthorized_Dock_Undock
                     Defaults to Critical.

              IPMI_Physical_Security_FAN_Area_Intrusion
                     Defaults to Critical.

       IPMI_Platform_Security_Violation_Attempt
              The following states correspond to  Platform  Violation  Attempt
              sensors  w/  Platform Security Violation Attempt specific output
              states.

              IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_Attempt
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_User_Password
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Setup_Password
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Network_Boot_Password
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Violation
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Password_Violation
                     Defaults to Critical.

       IPMI_Processor
              The  following  states  correspond  to  Processor   sensors   w/
              Processor specific output states.

              IPMI_Processor_IERR
                     Defaults to Critical.

              IPMI_Processor_Thermal_Trip
                     Defaults to Critical.

              IPMI_Processor_FRB1_BIST_Failure
                     Defaults to Critical.

              IPMI_Processor_FRB2_Hang_In_POST_Failure
                     Defaults to Critical.

              IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure
                     Defaults to Critical.

              IPMI_Processor_Configuration_Error
                     Defaults to Critical.

              IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error
                     Defaults to Critical.

              IPMI_Processor_Processor_Presence_Detected
                     Defaults to Nominal.

              IPMI_Processor_Processor_Disabled
                     Defaults to Critical.

              IPMI_Processor_Terminator_Presence_Detected
                     Defaults to Critical.

              IPMI_Processor_Processor_Automatically_Throttled
                     Defaults to Warning.

       IPMI_Power_Supply
              The following states correspond to Power Supply sensors w/ Power
              Supply specific output states.

              IPMI_Power_Supply_Presence_Detected
                     Defaults to Nominal.

              IPMI_Power_Supply_Power_Supply_Failure_Detected
                     Defaults to Critical.

              IPMI_Power_Supply_Predictive_Failure
                     Defaults to Critical.

              IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC
                     Defaults to Critical.

              IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range
                     Defaults to Critical.

              IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present
                     Defaults to Critical.

              IPMI_Power_Supply_Configuration_Error
                     Defaults to Critical.

       IPMI_Power_Unit
              The following states correspond to Power Unit sensors  w/  Power
              Unit specific output states.

              IPMI_Power_Unit_Power_Off_Power_Down
                     Defaults to Nominal.

              IPMI_Power_Unit_Power_Cycle
                     Defaults to Nominal.

              IPMI_Power_Unit_240VA_Power_Down
                     Defaults to Warning.

              IPMI_Power_Unit_Interlock_Power_Down
                     Defaults to Warning.

              IPMI_Power_Unit_AC_Lost
                     Defaults to Critical.

              IPMI_Power_Unit_Soft_Power_Control_Failure
                     Defaults to Critical.

              IPMI_Power_Unit_Power_Unit_Failure_Detected
                     Defaults to Critical.

              IPMI_Power_Unit_Predictive_Failure
                     Defaults to Critical.

       IPMI_Memory
              The  following  states  correspond  to  Memory sensors w/ Memory
              specific output states.

              IPMI_Memory_Correctable_ECC_Memory_Error
                     Defaults to Warning.

              IPMI_Memory_Uncorrectable_ECC_Memory_Error
                     Defaults to Critical.

              IPMI_Memory_Parity
                     Defaults to Critical.

              IPMI_Memory_Memory_Scrub_Failed
                     Defaults to Critical.

              IPMI_Memory_Memory_Device_Disabled
                     Defaults to Critical.

              IPMI_Memory_Correctable_ECC_Memory_Error_Logging_Limit_Reached
                     Defaults to Warning.

              IPMI_Memory_Presence_Detected
                     Defaults to Nominal.

              IPMI_Memory_Configuration_Error
                     Defaults to Critical.

              IPMI_Memory_Spare
                     Defaults to Nominal.

              IPMI_Memory_Memory_Automatically_Throttled
                     Defaults to Warning.

       IPMI_Drive_Slot
              The following states correspond to Drive Slot sensors  w/  Drive
              Slot specific output states.

              IPMI_Drive_Slot_Drive_Presence
                     Defaults to Nominal.

              IPMI_Drive_Slot_Drive_Fault
                     Defaults to Critical.

              IPMI_Drive_Slot_Predictive_Failure
                     Defaults to Critical.

              IPMI_Drive_Slot_Hot_Spare
                     Defaults to Nominal.

              IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress
                     Defaults to Nominal.

              IPMI_Drive_Slot_In_Critical_Array
                     Defaults to Critical.

              IPMI_Drive_Slot_In_Failed_Array
                     Defaults to Critical.

              IPMI_Drive_Slot_Rebuild_Remap_In_Progress
                     Defaults to Nominal.

              IPMI_Drive_Slot_Rebuild_Remap_Aborted
                     Defaults to Critical.

       IPMI_System_Firmware_Progress
              The  following  states  correspond  to  System Firmware Progress
              sensors w/ System Firmware Progress specific output states.

              IPMI_System_Firmware_Progress_System_Firmware_Error
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_System_Firmware_Hang
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_System_Firmware_Progress
                     Defaults to Nominal.

       IPMI_Event_Logging_Disabled
              The  following  states  correspond  to  Event  Logging  Disabled
              sensors w/

              IPMI_Event_Logging_Disabled_Correctable_Memory_Logging_Disabled
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared
                     Defaults to Nominal.

              IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_SEL_Full
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_SEL_Almost_Full
                     Defaults to Warning.

       IPMI_System_Event
              The  following  states  correspond  to  System  Event sensors w/
              System Event specific output states.

              IPMI_System_Event_System_Reconfigured
                     Defaults to Warning.

              IPMI_System_Event_OEM_System_Boot_Event
                     Defaults to Nominal.

              IPMI_System_Event_Undetermined_System_Hardware_Failure
                     Defaults to Critical.

              IPMI_System_Event_Entry_Added_To_Auxiliary_Log
                     Defaults to Nominal.

              IPMI_System_Event_PEF_Action
                     Defaults to Nominal.

              IPMI_System_Event_Timestamp_Clock_Sync
                     Defaults to Warning.

       IPMI_Critical_Interrupt
              The following states correspond to Critical Interrupt sensors w/
              Critical Interrupt specific output states.

              IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Bus_Timeout
                     Defaults to Critical.

              IPMI_Critical_Interrupt_I_O_Channel_Check_NMI
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Software_NMI
                     Defaults to Warning.

              IPMI_Critical_Interrupt_PCI_PERR
                     Defaults to Critical.

              IPMI_Critical_Interrupt_PCI_SERR
                     Defaults to Critical.

              IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Bus_Correctable_Error
                     Defaults to Warning.

              IPMI_Critical_Interrupt_Bus_Uncorrectable_Error
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Fatal_NMI
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Bus_Fatal_Error
                     Defaults to Critical.

       IPMI_Slot_Connector
              The  following  states  correspond  to Slot Connector sensors w/
              Slot Connector specific output states.

              IPMI_Slot_Connector_Fault_Status_Asserted
                     Defaults to Critical.

              IPMI_Slot_Connector_Identify_Status_Asserted
                     Defaults to Warning.

              IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Power_Is_Off
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request
                     Defaults to Warning.

              IPMI_Slot_Connector_Interlock_Asserted
                     Defaults to Warning.

              IPMI_Slot_Connector_Slot_Is_Disabled
                     Defaults to Warning.

              IPMI_Slot_Connector_Slot_Holds_Spare_Device
                     Defaults to Nominal.

       IPMI_Watchdog2
              The  following  states  correspond  to  Watchdog  2  sensors  w/
              Watchdog 2 specific output states.

              IPMI_Watchdog2_Timer_Expired
                     Defaults to Warning.

              IPMI_Watchdog2_Hard_Reset
                     Defaults to Critical.

              IPMI_Watchdog2_Power_Down
                     Defaults to Critical.

              IPMI_Watchdog2_Power_Cycle
                     Defaults to Critical.

              IPMI_Watchdog2_Reserved1
                     Defaults to Nominal.

              IPMI_Watchdog2_Reserved2
                     Defaults to Nominal.

              IPMI_Watchdog2_Reserved3
                     Defaults to Nominal.

              IPMI_Watchdog2_Reserved4
                     Defaults to Nominal.

              IPMI_Watchdog2_Timer_Interrupt
                     Defaults to Warning.

       IPMI_Entity_Presence
              The  following  states  correspond to Entity Presence sensors w/
              Entity Presence specific output states.

              IPMI_Entity_Presence_Entity_Present
                     Defaults to Nominal.

              IPMI_Entity_Presence_Entity_Absent
                     Defaults to Critical.

              IPMI_Entity_Presence_Entity_Disabled
                     Defaults to Critical.

       IPMI_Management_Subsystem_Health
              The following states correspond to Management  Subsystem  Health
              sensors w/ Management Subsystem Health specific output states.

              IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavailable
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Unavailable
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Management_Controller_Off_Line
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Management_Controller_Unavailable
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Sensor_Failure
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_FRU_Failure
                     Defaults to Critical.

       IPMI_Battery
              The  following  states  correspond to Battery sensors w/ Battery
              specific output states.

              IPMI_Battery_Battery_Low
                     Defaults to Warning.

              IPMI_Battery_Battery_Failed
                     Defaults to Critical.

              IPMI_Battery_Battery_Presence_Detected
                     Defaults to Nominal.

       IPMI_FRU_State
              The following states correspond to  FRU  State  sensors  w/  FRU
              State specific output states.

              IPMI_FRU_State_FRU_Not_Installed
                     Defaults to Critical.

              IPMI_FRU_State_FRU_Inactive
                     Defaults to Critical.

              IPMI_FRU_State_FRU_Activation_Requested
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Activation_In_Progress
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Active
                     Defaults to Nominal.

              IPMI_FRU_State_FRU_Deactivation_Requested
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Deactivation_In_Progress
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Communication_Lost
                     Defaults to Critical.

       IPMI_Cable_Interconnect
              The following states correspond to Cable/Interconnect sensors w/
              Cable/Interconnect specific output states.

              IPMI_Cable_Interconnect_Is_Connected
                     Defaults to Nominal.

              IPMI_Cable_Interconnect_Incorrect_Cable_Connected_Incorrect_Interconnection
                     Defaults to Critical.

       IPMI_Boot_Error
              The following states correspond to Boot Error  sensors  w/  Boot
              Error specific output states.

              IPMI_Boot_Error_No_Bootable_Media
                     Defaults to Critical.

              IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive
                     Defaults to Critical.

              IPMI_Boot_Error_PXE_Server_Not_Found
                     Defaults to Critical.

              IPMI_Boot_Error_Invalid_Boot_Sector
                     Defaults to Critical.

              IPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source
                     Defaults to Warning.

       IPMI_Button_Switch
              The  following  states  correspond  to  Button/Switch sensors w/
              Button/Switch specific output states.

              IPMI_Button_Switch_Power_Button_Pressed
                     Defaults to Nominal.

              IPMI_Button_Switch_Sleep_Button_Pressed
                     Defaults to Nominal.

              IPMI_Button_Switch_Reset_Button_Pressed
                     Defaults to Nominal.

              IPMI_Button_Switch_FRU_Latch_Open
                     Defaults to Warning.

              IPMI_Button_Switch_FRU_Service_Request_Button
                     Defaults to Warning.

       IPMI_System_ACPI_Power_State

              IPMI_System_ACPI_Power_State_S0_G0
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S1
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S2
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S3
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S4
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S5_G2
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S4_S5_Soft_Off
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_G3_Mechanical_Off
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_G1_Sleeping
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S5_Entered_By_Override
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Legacy_ON_State
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Legacy_OFF_State
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Unspecified
                     Defaults to Critical.

              IPMI_System_ACPI_Power_State_Unknown
                     Defaults to Critical.

FILES

       /etc/ipmi_monitoring_sensors.conf

REPORTING BUGS

       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

COPYRIGHT

       Copyright © 2003-2008 FreeIPMI Core Team.

       FreeIPMI is free software; you can redistribute  it  and/or  modify  it
       under  the  terms of the GNU General Public License as published by the
       Free Software Foundation; either version 2 of the License, or (at  your
       option) any later version.

SEE ALSO

       ipmimonitoring(8), libipmimonitoring(3)

       http://www.gnu.org/software/freeipmi/