Man Linux: Main Page and Category List

NAME

       cupsd.conf - server configuration file for cups

DESCRIPTION

       The  cupsd.conf  file  configures  the CUPS scheduler, cupsd(8).  It is
       normally located in the /etc/cups directory.

       Each line in the file can be a configuration directive, a  blank  line,
       or   a   comment.  Comment  lines  start  with  the  #  character.  The
       configuration directives are intentionally similar to those used by the
       popular Apache web server software and are described below.

DIRECTIVES

       The  following  directives  are understood by cupsd(8). Consult the on-
       line help for detailed descriptions:

       AccessLog filename

       AccessLog syslog
            Defines the access log filename.

       AccessLogLevel config

       AccessLogLevel actions

       AccessLogLevel all
            Specifies the logging level for the AccessLog file.

       Allow all

       Allow none

       Allow host.domain.com

       Allow *.domain.com

       Allow ip-address

       Allow ip-address/netmask

       Allow ip-address/mm

       Allow @IF(name)

       Allow @LOCAL
            Allows access from the named hosts or addresses.

       AuthClass User

       AuthClass Group

       AuthClass System
            Specifies the authentication class (User, Group,  System)  -  this
            directive is deprecated.

       AuthGroupName group-name
            Specifies the authentication group - this directive is deprecated.

       AuthType None

       AuthType Basic

       AuthType BasicDigest

       AuthType Digest

       AuthType Negotiate
            Specifies  the  authentication  type  (None,  Basic,  BasicDigest,
            Digest, Negotiate)

       AutoPurgeJobs Yes

       AutoPurgeJobs No
            Specifies  whether to purge job history data automatically when it
            is no longer required for quotas.

       BrowseAddress ip-address

       BrowseAddress @IF(name)

       BrowseAddress @LOCAL
            Specifies a broadcast address  for  outgoing  printer  information
            packets.

       BrowseAllow all

       BrowseAllow none

       BrowseAllow host.domain.com

       BrowseAllow *.domain.com

       BrowseAllow ip-address

       BrowseAllow ip-address/netmask

       BrowseAllow ip-address/mm

       BrowseAllow @IF(name)

       BrowseAllow @LOCAL
            Allows incoming printer information packets from the named host or
            address.

       BrowseDeny all

       BrowseDeny none

       BrowseDeny host.domain.com

       BrowseDeny *.domain.com

       BrowseDeny ip-address

       BrowseDeny ip-address/netmask

       BrowseDeny ip-address/mm

       BrowseDeny @IF(name)

       BrowseDeny @LOCAL
            Denies incoming printer information packets from the named host or
            address.

       BrowseInterval seconds
            Specifies   the   maximum  interval  between  printer  information
            broadcasts.

       BrowseLDAPBindDN
            Specifies the LDAP domain name to use when registering printers.

       BrowseLDAPCACertFile
            Specifies the SSL certificate authority file to use.

       BrowseLDAPDN
            Specifies the LDAP domain name to use when discovering printers.

       BrowseLDAPPassword
            Specifies the password to use when accessing the LDAP server.

       BrowseLDAPServer
            Specifies the LDAP server to use.

       BrowseOrder allow,deny

       BrowseOrder deny,allow
            Specifies  the  order  of  printer  information   access   control
            (allow,deny or deny,allow)

       BrowsePoll host-or-ip-address
            Specifies a server to poll for printer information.

       BrowsePort port
            Specifies the port to listen to for printer information packets.

       BrowseProtocols [All] [CUPS] [DNSSD] [LDAP] [SLP]
            Specifies the protocols to use for printer browsing.

       BrowseLocalProtocols [All] [CUPS] [DNSSD] [LDAP] [SLP]
            Specifies the protocols to use for local printer browsing.

       BrowseRemoteProtocols [All] [CUPS] [DNSSD] [LDAP] [SLP]
            Specifies the protocols to use for remote printer browsing.

       BrowseRelay from-address to-address
            Specifies  that printer information packets should be relayed from
            one host or network to another.

       BrowseShortNames Yes

       BrowseShortNames No
            Specifies whether remote printers will use short names ("printer")
            or not ("printer@server"). This option is ignored if more than one
            remote printer exists with the same name.

       BrowseTimeout seconds
            Specifies the maximum interval between printer information updates
            before  remote printers will be removed from the list of available
            printers.

       BrowseWebIF Yes

       BrowseWebIF No
            Specifies whether the CUPS web interface is advertised via DNS-SD.

       Browsing Yes

       Browsing No
            Specifies  whether  or  not  remote  printer  browsing  should  be
            enabled.

       Classification banner
            Specifies the security classification of the server.

       ClassifyOverride Yes

       ClassifyOverride No
            Specifies whether to allow users to override the classification of
            individual print jobs.

       ConfigFilePerm mode
            Specifies  the  permissions  for  all configuration files that the
            scheduler writes.

       DataDir path
            Specified the directory where data files can be found.

       DefaultAuthType Basic

       DefaultAuthType BasicDigest

       DefaultAuthType Digest

       DefaultAuthType Negotiate
            Specifies the default type of authentication to use.

       DefaultEncryption Never

       DefaultEncryption IfRequested

       DefaultEncryption Required
            Specifies  the  type  of  encryption  to  use  for   authenticated
            requests.

       DefaultLanguage locale
            Specifies the default language to use for text and web content.

       DefaultPaperSize Auto

       DefaultPaperSize None

       DefaultPaperSize sizename
            Specifies the default paper size for new print queues. "Auto" uses
            a locale- specific default, while "None"  specifies  there  is  no
            default paper size.

       DefaultPolicy policy-name
            Specifies the default access policy to use.

       DefaultShared Yes

       DefaultShared No
            Specifies whether local printers are shared by default.

       Deny all

       Deny none

       Deny host.domain.com

       Deny *.domain.com

       Deny ip-address

       Deny ip-address/netmask

       Deny ip-address/mm

       Deny @IF(name)

       Deny @LOCAL
            Denies access to the named host or address.

       DirtyCleanInterval seconds
            Specifies the delay for updating of configuration and state files.
            A value of 0 causes the update to  happen  as  soon  as  possible,
            typically within a few milliseconds.

       DocumentRoot directory
            Specifies   the   root  directory  for  the  internal  web  server
            documents.

       Encryption IfRequested

       Encryption Never

       Encryption Required
            Specifies  the  level  of  encryption  that  is  required  for   a
            particular location.

       ErrorLog filename

       ErrorLog syslog
            Specifies the error log filename.

       FatalErrors none

       FatalErrors all -kind [... -kind]

       FatalErrors kind [... kind]
            Specifies  which  errors are fatal, causing the scheduler to exit.
            "Kind" is "browse", "config", "listen", "log", or "permissions".

       FileDevice Yes

       FileDevice No
            Specifies whether the file  pseudo-device  can  be  used  for  new
            printer queues.

       FilterLimit limit
            Specifies the maximum cost of filters that are run concurrently.

       FilterNice nice-value
            Specifies  the  scheduling priority ("nice" value) of filters that
            are run to print a job.

       FontPath directory[:directory:...]
            Specifies the search path for fonts.

       Group group-name-or-number
            Specifies the group name or ID that will be  used  when  executing
            external programs.

       HideImplicitMembers Yes

       HideImplicitMembers No
            Specifies whether to hide members of implicit classes.

       HostNameLookups On

       HostNameLookups Off

       HostNameLookups Double
            Specifies   whether  or  not  to  do  reverse  lookups  on  client
            addresses.

       ImplicitAnyClasses Yes

       ImplicitAnyClasses No
            Specifies whether or not to create implicit classes for local  and
            remote     printers,    e.g.    "AnyPrinter"    from    "Printer",
            "Printer@server1", and "Printer@server2".

       ImplicitClasses Yes

       ImplicitClasses No
            Specifies whether or not to create implicit classes from identical
            remote printers.

       Include filename
            Includes the named file.

       JobKillDelay seconds
            Specifies the number of seconds to wait before killing the filters
            and backend associated with a canceled or held job.

       JobRetryInterval seconds
            Specifies the interval between retries of jobs in seconds.

       JobRetryLimit count
            Specifies the number of retries that are done for jobs.

       KeepAlive Yes

       KeepAlive No
            Specifies whether to support HTTP keep-alive connections.

       KeepAliveTimeout seconds
            Specifies the amount of time that connections are kept alive.

       <Limit operations> ... </Limit>
            Specifies the IPP operations  that  are  being  limited  inside  a
            policy.

       <Limit methods> ... </Limit>

       <LimitExcept methods> ... </LimitExcept>
            Specifies  the  HTTP  methods  that  are  being  limited  inside a
            location.

       LimitRequestBody
            Specifies the maximum size of any print job request.

       Listen ip-address:port

       Listen *:port

       Listen /path/to/domain/socket
            Listens to the specified address and port or domain socket path.

       <Location /path> ... </Location>
            Specifies access control for the named location.

       LogDebugHistory #-messages
            Specifies the number of debugging messages that are logged when an
            error occurs in a print job.

       LogFilePerm mode
            Specifies  the  permissions  for  all log files that the scheduler
            writes.

       LogLevel alert

       LogLevel crit

       LogLevel debug2

       LogLevel debug

       LogLevel emerg

       LogLevel error

       LogLevel info

       LogLevel none

       LogLevel notice

       LogLevel warn
            Specifies the logging level for the ErrorLog file.

       LogTimeFormat standard

       LogTimeFormat usecs
            Specifies the format of the date and time in the log files.

       MaxClients number
            Specifies the maximum number of simultaneous clients to support.

       MaxClientsPerHost number
            Specifies the maximum number of simultaneous  clients  to  support
            from a single address.

       MaxCopies number
            Specifies  the  maximum  number of copies that a user can print of
            each job.

       MaxJobs number
            Specifies the maximum number of simultaneous jobs to support.

       MaxJobsPerPrinter number
            Specifies the maximum number of simultaneous jobs per  printer  to
            support.

       MaxJobsPerUser number
            Specifies  the  maximum  number  of  simultaneous jobs per user to
            support.

       MaxLogSize number-bytes
            Specifies the maximum size  of  the  log  files  before  they  are
            rotated (0 to disable rotation)

       MaxRequestSize number-bytes
            Specifies the maximum request/file size in bytes (0 for no limit)

       MultipleOperationTimeout seconds
            Specifies  the  maximum amount of time to allow between files in a
            multiple file print job.

       Order allow,deny

       Order deny,allow
            Specifies  the  order  of  HTTP  access  control  (allow,deny   or
            deny,allow)

       PageLog filename

       PageLog syslog
            Specifies the page log filename.

       PageLogFormat format string
            Specifies the format of page log lines.

       PassEnv variable [... variable]
            Passes the specified environment variable(s) to child processes.

       <Policy name> ... </Policy>
            Specifies access control for the named policy.

       Port number
            Specifies a port number to listen to for HTTP requests.

       PreserveJobFiles Yes

       PreserveJobFiles No
            Specifies  whether  or  not  to  preserve job files after they are
            printed.

       PreserveJobHistory Yes

       PreserveJobHistory No
            Specifies whether or not to preserve the job  history  after  they
            are printed.

       Printcap

       Printcap filename
            Specifies  the  filename  for  a  printcap  file  that  is updated
            automatically with a list of available printers (needed for legacy
            applications);  specifying  Printcap  with  no  filename  disables
            printcap generation.

       PrintcapFormat bsd

       PrintcapFormat plist

       PrintcapFormat solaris
            Specifies the format of the printcap file.

       PrintcapGUI

       PrintcapGUI gui-program-filename
            Specifies whether to generate option  panel  definition  files  on
            some  operating  systems.  When provided with no program filename,
            disables option panel definition files.

       ReloadTimeout seconds
            Specifies the amount of time to wait  for  job  completion  before
            restarting the scheduler.

       RemoteRoot user-name
            Specifies  the  username  that  is associated with unauthenticated
            root accesses.

       RequestRoot directory
            Specifies the directory to store print jobs and other HTTP request
            data.

       Require group group-name-list

       Require user user-name-list

       Require valid-user
            Specifies that user or group authentication is required.

       RIPCache bytes
            Specifies  the  maximum  amount  of  memory to use when converting
            images and PostScript files to bitmaps for a printer.

       Satisfy all

       Satisfy any
            Specifies whether all or any limits set for  a  Location  must  be
            satisfied to allow access.

       ServerAdmin user@domain.com
            Specifies the email address of the server administrator.

       ServerAlias hostname
            Specifies  an  alternate  name  that  the  server is known by. The
            special name "*" allows any name to be used.

       ServerBin directory
            Specifies the directory where backends, CGIs, daemons, and filters
            may be found.

       ServerCertificate filename
            Specifies the encryption certificate to use.

       ServerKey filename
            Specifies the encryption key to use.

       ServerName hostname-or-ip-address
            Specifies the fully-qualified hostname of the server.

       ServerRoot directory
            Specifies  the  directory where the server configuration files can
            be found.

       ServerTokens Full

       ServerTokens Major

       ServerTokens Minimal

       ServerTokens Minor

       ServerTokens None

       ServerTokens OS

       ServerTokens ProductOnly
            Specifies what information is included in  the  Server  header  of
            HTTP responses.

       SetEnv variable value
            Set  the  specified  environment  variable  to  be passed to child
            processes.

       SSLListen
            Listens  on  the  specified  address  and   port   for   encrypted
            connections.

       SSLOptions None

       SSLOptions NoEmptyFragments
            Sets SSL/TLS protocol options for encrypted connections.

       SSLPort
            Listens on the specified port for encrypted connections.

       SystemGroup group-name [group-name ...]
            Specifies the group(s) to use for System class authentication.

       TempDir directory
            Specifies the directory where temporary files are stored.

       Timeout seconds
            Specifies the HTTP request timeout in seconds.

       User user-name
            Specifies  the  user name or ID that is used when running external
            programs.

SEE ALSO

       classes.conf(5),      cupsd(8),      mime.convs(5),      mime.types(5),
       printers.conf(5), subscriptions.conf(5),
       http://localhost:631/help

COPYRIGHT

       Copyright 2007-2009 by Apple Inc.