NAME
xpt - CAM transport layer interface
SYNOPSIS
None.
DESCRIPTION
The xpt driver provides a way for userland applications to issue certain
CAM CCBs to the kernel.
Since the xpt driver allows direct access to the CAM subsystem, system
administrators should exercise caution when granting access to this
driver. If used improperly, this driver can allow userland applications
to crash a machine or cause data loss.
KERNEL CONFIGURATION
There is no kernel configuration required for the xpt driver. It is
enabled when SCSI support is enabled in the kernel. There is one
instance of the xpt driver per CAM transport layer instance. Since there
is currently only one CAM transport layer, there will only be one
instance of this driver.
IOCTLS
CAMIOCOMMAND This ioctl takes certain kinds of CAM CCBs and passes
them through to the CAM transport layer for action. Only
the following CCB types are supported:
XPT_SCAN_BUS
XPT_RESET_BUS
XPT_SCAN_LUN
XPT_ENG_INQ
XPT_ENG_EXEC
XPT_DEBUG
XPT_DEV_MATCH
XPT_PATH_INQ
The above CCBs are the only ones supported since it makes
more sense to send them through a generic passthrough
device rather than a passthrough device tied to a
particular underlying SCSI device.
CAMGETPASSTHRU This ioctl takes an XPT_GDEVLIST CCB, and returns the
passthrough device corresponding to the device in
question.
FILES
/dev/xpt0 Character device node for the xpt driver.
DIAGNOSTICS
None.
SEE ALSO
cam(3), cam_cdbparse(3), pass(4), camcontrol(8)
HISTORY
The CAM transport layer driver first appeared in FreeBSD 3.0.
AUTHORS
Kenneth Merry 〈ken@FreeBSD.org〉