ne_sock_init, ne_sock_exit - perform library initialization
In some platforms and configurations, neon may be using some socket or
SSL libraries which require global initialization before use. To
perform this initialization, the ne_sock_init function must be called
before any other library functions are used.
Once all use of neon is complete, ne_sock_exit can be called to perform
de-initialization of socket or SSL libraries, if necessary. Uses of
ne_sock_init and ne_sock_exit are "reference counted"; if N calls to
ne_sock_init are made, only the Nth call to ne_sock_exit will have
ne_sock_init will set the disposition of the SIGPIPE signal to ignored.
No change is made to the SIGPIPE disposition by ne_sock_exit.
Both the SSL libraries supported by neon — OpenSSL and GnuTLS — require
callbacks to be registered to allow thread-safe use of SSL. These
callbacks are stored as global variables and so their state persists
for as long as the library in question is loaded into the process. If
multiple users of the SSL library exist within the process, this can be
problematic, particularly if one is dynamically loaded (and may
subsequently be unloaded).
If neon is configured using the --enable-threadsafe-ssl flag,
thread-safe SSL support will be enabled automatically, as covered in
the following section. Otherwise, it is not safe to use neon with SSL
in a multi-threaded process. The ne_has_support function can be used to
determine whether neon is built to enable thread-safety support in the
Thread-safe SSL with OpenSSL
neon follows two simple rules when dealing with the OpenSSL locking
· ne_sock_init will set thread-safety locking callbacks if and only
if no locking callbacks are already registered.
· ne_sock_exit will unset the thread-safety locking callbacks if and
only if the locking callbacks registered are those registered by
Applications and libraries should be able to co-operate to ensure that
SSL use is always thread-safe if similar rules are always followed.
Thread-safe SSL with GnuTLS
The cryptography library used by GnuTLS, libgcrypt, only supports an
initialization operation to register thread-safety callbacks.
ne_sock_init will register the thread-safe locking callbacks on first
use; ne_sock_exit cannot unregister them. If multiple users of GnuTLS
are present within the process, it is unsafe to dynamically unload neon
from the process if neon is configured with thread-safe SSL support
enabled (since the callbacks would be left pointing at unmapped memory
once neon is unloaded).
ne_sock_init returns zero on success, or non-zero on error. If an error
occurs, no further use of the neon library should be attempted.
Joe Orton <email@example.com>