Man Linux: Main Page and Category List


       m16c-flash - Flash programmer for Renesas M16C and R8C microcontrollers


       m16c-flash [COM_DEV] [CPU_TYPE] [FILE] [ID1:...:ID7] [OPTIONS]


       m16c-flash  is  a  flash  programmer  for  the  Renesas  M16C  and  R8C
       microcontrollers which operates in asynchronous mode.


       COM_DEV  The  serial  device  to  use  for flashing, e.g. /dev/ttyS0 or

       CPU_TYPE The CPU type you want to flash to (currently M16C or R8C).

       FILE The filename of the binary you want to flash.

       ID1:...:ID7 The device ID.

       --help Show a help text and exit.

       --version Show version information and exit.


       Flash the simple.s file onto an  M16C  microcontroller  via  the  first
       serial port (/dev/ttyS0) using 0:0:0:0:0:0:0 as the device ID:
       m16c-flash /dev/ttyS0 M16C simple.s 0:0:0:0:0:0:0

       Flash  the test.mot file onto an R8C microcontroller via the USB serial
       device /dev/ttyUSB0, and using ff:ff:ff:ff:ff:ff:ff as device ID:
       m16c-flash /dev/ttyUSB0 R8C test.mot ff:ff:ff:ff:ff:ff:ff


       Please report any bugs to Thomas Fischl <>.


       m16c-flash is covered by the GNU General Public License (GPL).


       Greg Reynolds <>
       Jim Hawkridge <>
       Thomas Fischl <>

       This manual page was written by Uwe Hermann  <>,  for
       the Debian GNU/Linux system (but may be used by others).

                                August 20, 2006