Man Linux: Main Page and Category List


       gusload - load a GUS-format patch file into the AWE32 RAM


       gusload [-Iixv] [-b bank] [-p preset] GUSpatch


       This  manual  page  documents briefly the gusload command.  This manual
       page was written for the Debian GNU/Linux distribution (but may be used
       by others), because the original program does not have a manual page.

       gusload  is  a program that will read a GUS-format patch file, and then
       upload it to the  Linux  AWE32  driver,  to  be  used  by  other  AWE32
       utilities, e.g. drvmidi(1).


       The  program  follows  the  usual UNIX command line syntax, but doesn’t
       support long options (options starting with two dashes ‘-’).  Here is a
       summary of the options is accepts:-

       -I     (Re-)Initializes the AWE32 driver.

       -i     Resets all samples.

       -x     Removes the last samples in the AWE32’s RAM.

       -v     Verbose mode.

       -p [preset]
              Sets  the  instrument  number  to  [preset].  Defaults to values
              specified in the patch file.

       -b [bank]
              Sets the "bank" that the instruments are loaded  into.  Defaults
              to bank 0.

       -c [chorus]
              Sets the amount of chorus, ranging from 0 to 100.

       -r [reverb]
              Sets the amount of reverberation, ranging from 0 to 100.




       This  manual  page  was written by Tom Lees <>, for
       the Debian GNU/Linux system.

       The  AWE32  driver  and  utilities  were  written   by   Takashi   Iwai