NAME
git-show - Show various types of objects
SYNOPSIS
git show [options] <object>...
DESCRIPTION
Shows one or more objects (blobs, trees, tags and commits).
For commits it shows the log message and textual diff. It also presents
the merge commit in a special format as produced by git diff-tree --cc.
For tags, it shows the tag message and the referenced objects.
For trees, it shows the names (equivalent to git ls-tree with
--name-only).
For plain blobs, it shows the plain contents.
The command takes options applicable to the git diff-tree command to
control how the changes the commit introduces are shown.
This manual page describes only the most frequently used options.
OPTIONS
<object>...
The names of objects to show. For a more complete list of ways to
spell object names, see "SPECIFYING REVISIONS" section in git-rev-
parse(1).
--pretty[=<format>], --format[=<format>]
Pretty-print the contents of the commit logs in a given format,
where <format> can be one of oneline, short, medium, full, fuller,
email, raw and format:<string>. When omitted, the format defaults
to medium.
Note: you can specify the default pretty format in the repository
configuration (see git-config(1)).
--abbrev-commit
Instead of showing the full 40-byte hexadecimal commit object name,
show only a partial prefix. Non default number of digits can be
specified with "--abbrev=<n>" (which also modifies diff output, if
it is displayed).
This should make "--pretty=oneline" a whole lot more readable for
people using 80-column terminals.
--oneline
This is a shorthand for "--pretty=oneline --abbrev-commit" used
together.
--encoding[=<encoding>]
The commit objects record the encoding used for the log message in
their encoding header; this option can be used to tell the command
to re-code the commit log message in the encoding preferred by the
user. For non plumbing commands this defaults to UTF-8.
--no-notes, --show-notes[=<ref>]
Show the notes (see git-notes(1)) that annotate the commit, when
showing the commit log message. This is the default for git log,
git show and git whatchanged commands when there is no --pretty,
--format nor --oneline option is given on the command line.
With an optional argument, add this ref to the list of notes. The
ref is taken to be in refs/notes/ if it is not qualified.
--[no-]standard-notes
Enable or disable populating the notes ref list from the
core.notesRef and notes.displayRef variables (or corresponding
environment overrides). Enabled by default. See git-config(1).
PRETTY FORMATS
If the commit is a merge, and if the pretty-format is not oneline,
email or raw, an additional line is inserted before the Author: line.
This line begins with "Merge: " and the sha1s of ancestral commits are
printed, separated by spaces. Note that the listed commits may not
necessarily be the list of the direct parent commits if you have
limited your view of history: for example, if you are only interested
in changes related to a certain directory or file.
Here are some additional details for each format:
o oneline
<sha1> <title line>
This is designed to be as compact as possible.
o short
commit <sha1>
Author: <author>
<title line>
o medium
commit <sha1>
Author: <author>
Date: <author date>
<title line>
<full commit message>
o full
commit <sha1>
Author: <author>
Commit: <committer>
<title line>
<full commit message>
o fuller
commit <sha1>
Author: <author>
AuthorDate: <author date>
Commit: <committer>
CommitDate: <committer date>
<title line>
<full commit message>
o email
From <sha1> <date>
From: <author>
Date: <author date>
Subject: [PATCH] <title line>
<full commit message>
o raw
The raw format shows the entire commit exactly as stored in the
commit object. Notably, the SHA1s are displayed in full, regardless
of whether --abbrev or --no-abbrev are used, and parents
information show the true parent commits, without taking grafts nor
history simplification into account.
o format:
The format: format allows you to specify which information you want
to show. It works a little bit like printf format, with the notable
exception that you get a newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title was >>%s<<%n"
would show something like this:
The author of fe6e0ee was Junio C Hamano, 23 hours ago
The title was >>t4119: test autocomputing -p<n> for traditional diff input.<<
The placeholders are:
o %H: commit hash
o %h: abbreviated commit hash
o %T: tree hash
o %t: abbreviated tree hash
o %P: parent hashes
o %p: abbreviated parent hashes
o %an: author name
o %aN: author name (respecting .mailmap, see git-shortlog(1) or
git-blame(1))
o %ae: author email
o %aE: author email (respecting .mailmap, see git-shortlog(1) or
git-blame(1))
o %ad: author date (format respects --date= option)
o %aD: author date, RFC2822 style
o %ar: author date, relative
o %at: author date, UNIX timestamp
o %ai: author date, ISO 8601 format
o %cn: committer name
o %cN: committer name (respecting .mailmap, see git-shortlog(1)
or git-blame(1))
o %ce: committer email
o %cE: committer email (respecting .mailmap, see git-shortlog(1)
or git-blame(1))
o %cd: committer date
o %cD: committer date, RFC2822 style
o %cr: committer date, relative
o %ct: committer date, UNIX timestamp
o %ci: committer date, ISO 8601 format
o %d: ref names, like the --decorate option of git-log(1)
o %e: encoding
o %s: subject
o %f: sanitized subject line, suitable for a filename
o %b: body
o %N: commit notes
o %gD: reflog selector, e.g., refs/stash@{1}
o %gd: shortened reflog selector, e.g., stash@{1}
o %gs: reflog subject
o %Cred: switch color to red
o %Cgreen: switch color to green
o %Cblue: switch color to blue
o %Creset: reset color
o %C(...): color specification, as described in color.branch.*
config option
o %m: left, right or boundary mark
o %n: newline
o %%: a raw %
o %x00: print a byte from a hex code
o %w([<w>[,<i1>[,<i2>]]]): switch line wrapping, like the -w
option of git-shortlog(1).
Note
Some placeholders may depend on other options given to the revision
traversal engine. For example, the %g* reflog options will insert
an empty string unless we are traversing reflog entries (e.g., by
git log -g). The %d placeholder will use the "short" decoration
format if --decorate was not already provided on the command line.
If you add a + (plus sign) after % of a placeholder, a line-feed is
inserted immediately before the expansion if and only if the
placeholder expands to a non-empty string.
If you add a - (minus sign) after % of a placeholder, line-feeds that
immediately precede the expansion are deleted if and only if the
placeholder expands to an empty string.
o tformat:
The tformat: format works exactly like format:, except that it
provides "terminator" semantics instead of "separator" semantics.
In other words, each commit has the message terminator character
(usually a newline) appended, rather than a separator placed
between entries. This means that the final entry of a single-line
format will be properly terminated with a new line, just as the
"oneline" format does. For example:
$ git log -2 --pretty=format:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973 -- NO NEWLINE
$ git log -2 --pretty=tformat:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973
In addition, any unrecognized string that has a % in it is
interpreted as if it has tformat: in front of it. For example,
these two are equivalent:
$ git log -2 --pretty=tformat:%h 4da45bef
$ git log -2 --pretty=%h 4da45bef
EXAMPLES
git show v1.0.0
Shows the tag v1.0.0, along with the object the tags points at.
git show v1.0.0^{tree}
Shows the tree pointed to by the tag v1.0.0.
git show next~10:Documentation/README
Shows the contents of the file Documentation/README as they were
current in the 10th last commit of the branch next.
git show master:Makefile master:t/Makefile
Concatenates the contents of said Makefiles in the head of the
branch master.
DISCUSSION
At the core level, git is character encoding agnostic.
o The pathnames recorded in the index and in the tree objects are
treated as uninterpreted sequences of non-NUL bytes. What
readdir(2) returns are what are recorded and compared with the data
git keeps track of, which in turn are expected to be what lstat(2)
and creat(2) accepts. There is no such thing as pathname encoding
translation.
o The contents of the blob objects are uninterpreted sequences of
bytes. There is no encoding translation at the core level.
o The commit log messages are uninterpreted sequences of non-NUL
bytes.
Although we encourage that the commit log messages are encoded in
UTF-8, both the core and git Porcelain are designed not to force UTF-8
on projects. If all participants of a particular project find it more
convenient to use legacy encodings, git does not forbid it. However,
there are a few things to keep in mind.
1. git commit and git commit-tree issues a warning if the commit log
message given to it does not look like a valid UTF-8 string, unless
you explicitly say your project uses a legacy encoding. The way to
say this is to have i18n.commitencoding in .git/config file, like
this:
[i18n]
commitencoding = ISO-8859-1
Commit objects created with the above setting record the value of
i18n.commitencoding in its encoding header. This is to help other
people who look at them later. Lack of this header implies that the
commit log message is encoded in UTF-8.
2. git log, git show, git blame and friends look at the encoding
header of a commit object, and try to re-code the log message into
UTF-8 unless otherwise specified. You can specify the desired
output encoding with i18n.logoutputencoding in .git/config file,
like this:
[i18n]
logoutputencoding = ISO-8859-1
If you do not have this configuration variable, the value of
i18n.commitencoding is used instead.
Note that we deliberately chose not to re-code the commit log message
when a commit is made to force UTF-8 at the commit object level,
because re-coding to UTF-8 is not necessarily a reversible operation.
AUTHOR
Written by Linus Torvalds <torvalds@osdl.org[1]> and Junio C Hamano
<gitster@pobox.com[2]>. Significantly enhanced by Johannes Schindelin
<Johannes.Schindelin@gmx.de[3]>.
DOCUMENTATION
Documentation by David Greaves, Petr Baudis and the git-list
<git@vger.kernel.org[4]>.
GIT
Part of the git(1) suite
NOTES
1. torvalds@osdl.org
mailto:torvalds@osdl.org
2. gitster@pobox.com
mailto:gitster@pobox.com
3. Johannes.Schindelin@gmx.de
mailto:Johannes.Schindelin@gmx.de
4. git@vger.kernel.org
mailto:git@vger.kernel.org