Man Linux: Main Page and Category List

NAME

       git-cvsserver - A CVS server emulator for git

SYNOPSIS

       SSH:

       export CVS_SERVER="git cvsserver"
       cvs -d :ext:user@server/path/repo.git co <HEAD_name>

       pserver (/etc/inetd.conf):

       cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver

       Usage:

       git-cvsserver [options] [pserver|server] [<directory> ...]

OPTIONS

       All these options obviously only make sense if enforced by the server
       side. They have been implemented to resemble the git-daemon(1) options
       as closely as possible.

       --base-path <path>
           Prepend path to requested CVSROOT

       --strict-paths
           Don't allow recursing into subdirectories

       --export-all
           Don't check for gitcvs.enabled in config. You also have to specify
           a list of allowed directories (see below) if you want to use this
           option.

       -V, --version
           Print version information and exit

       -h, -H, --help
           Print usage information and exit

       <directory>
           You can specify a list of allowed directories. If no directories
           are given, all are allowed. This is an additional restriction,
           gitcvs access still needs to be enabled by the gitcvs.enabled
           config option unless --export-all was given, too.

DESCRIPTION

       This application is a CVS emulation layer for git.

       It is highly functional. However, not all methods are implemented, and
       for those methods that are implemented, not all switches are
       implemented.

       Testing has been done using both the CLI CVS client, and the Eclipse
       CVS plugin. Most functionality works fine with both of these clients.

LIMITATIONS

       Currently cvsserver works over SSH connections for read/write clients,
       and over pserver for anonymous CVS access.

       CVS clients cannot tag, branch or perform GIT merges.

       git-cvsserver maps GIT branches to CVS modules. This is very different
       from what most CVS users would expect since in CVS modules usually
       represent one or more directories.

INSTALLATION

        1. If you are going to offer anonymous CVS access via pserver, add a
           line in /etc/inetd.conf like

                  cvspserver stream tcp nowait nobody git-cvsserver pserver

           Note: Some inetd servers let you specify the name of the executable
           independently of the value of argv[0] (i.e. the name the program
           assumes it was executed with). In this case the correct line in
           /etc/inetd.conf looks like

                  cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver

           No special setup is needed for SSH access, other than having GIT
           tools in the PATH. If you have clients that do not accept the
           CVS_SERVER environment variable, you can rename git-cvsserver to
           cvs.

           Note: Newer CVS versions (>= 1.12.11) also support specifying
           CVS_SERVER directly in CVSROOT like

               cvs -d ":ext;CVS_SERVER=git cvsserver:user@server/path/repo.git" co <HEAD_name>

           This has the advantage that it will be saved in your CVS/Root files
           and you don't need to worry about always setting the correct
           environment variable. SSH users restricted to git-shell don't need
           to override the default with CVS_SERVER (and shouldn't) as
           git-shell understands cvs to mean git-cvsserver and pretends that
           the other end runs the real cvs better.

        2. For each repo that you want accessible from CVS you need to edit
           config in the repo and add the following section.

                  [gitcvs]
                       enabled=1
                       # optional for debugging
                       logfile=/path/to/logfile

           Note: you need to ensure each user that is going to invoke
           git-cvsserver has write access to the log file and to the database
           (see Database Backend. If you want to offer write access over SSH,
           the users of course also need write access to the git repository
           itself.

           You also need to ensure that each repository is "bare" (without a
           git index file) for cvs commit to work. See gitcvs-migration(7).

           All configuration variables can also be overridden for a specific
           method of access. Valid method names are "ext" (for SSH access) and
           "pserver". The following example configuration would disable
           pserver access while still allowing access over SSH.

                  [gitcvs]
                       enabled=0

                  [gitcvs "ext"]
                       enabled=1

        3. If you didn't specify the CVSROOT/CVS_SERVER directly in the
           checkout command, automatically saving it in your CVS/Root files,
           then you need to set them explicitly in your environment. CVSROOT
           should be set as per normal, but the directory should point at the
           appropriate git repo. As above, for SSH clients not restricted to
           git-shell, CVS_SERVER should be set to git-cvsserver.

                    export CVSROOT=:ext:user@server:/var/git/project.git
                    export CVS_SERVER="git cvsserver"

        4. For SSH clients that will make commits, make sure their server-side
           .ssh/environment files (or .bashrc, etc., according to their
           specific shell) export appropriate values for GIT_AUTHOR_NAME,
           GIT_AUTHOR_EMAIL, GIT_COMMITTER_NAME, and GIT_COMMITTER_EMAIL. For
           SSH clients whose login shell is bash, .bashrc may be a reasonable
           alternative.

        5. Clients should now be able to check out the project. Use the CVS
           module name to indicate what GIT head you want to check out. This
           also sets the name of your newly checked-out directory, unless you
           tell it otherwise with -d <dir_name>. For example, this checks out
           master branch to the project-master directory:

                    cvs co -d project-master master

DATABASE BACKEND

       git-cvsserver uses one database per git head (i.e. CVS module) to store
       information about the repository to maintain consistent CVS revision
       numbers. The database needs to be updated (i.e. written to) after every
       commit.

       If the commit is done directly by using git (as opposed to using
       git-cvsserver) the update will need to happen on the next repository
       access by git-cvsserver, independent of access method and requested
       operation.

       That means that even if you offer only read access (e.g. by using the
       pserver method), git-cvsserver should have write access to the database
       to work reliably (otherwise you need to make sure that the database is
       up-to-date any time git-cvsserver is executed).

       By default it uses SQLite databases in the git directory, named
       gitcvs.<module_name>.sqlite. Note that the SQLite backend creates
       temporary files in the same directory as the database file on write so
       it might not be enough to grant the users using git-cvsserver write
       access to the database file without granting them write access to the
       directory, too.

       The database can not be reliably regenerated in a consistent form after
       the branch it is tracking has changed. Example: For merged branches,
       git-cvsserver only tracks one branch of development, and after a git
       merge an incrementally updated database may track a different branch
       than a database regenerated from scratch, causing inconsistent CVS
       revision numbers. git-cvsserver has no way of knowing which branch it
       would have picked if it had been run incrementally pre-merge. So if you
       have to fully or partially (from old backup) regenerate the database,
       you should be suspicious of pre-existing CVS sandboxes.

       You can configure the database backend with the following configuration
       variables:

   Configuring database backend
       git-cvsserver uses the Perl DBI module. Please also read its
       documentation if changing these variables, especially about
       DBI->connect().

       gitcvs.dbname
           Database name. The exact meaning depends on the selected database
           driver, for SQLite this is a filename. Supports variable
           substitution (see below). May not contain semicolons (;). Default:
           %Ggitcvs.%m.sqlite

       gitcvs.dbdriver
           Used DBI driver. You can specify any available driver for this
           here, but it might not work. cvsserver is tested with DBD::SQLite,
           reported to work with DBD::Pg, and reported not to work with
           DBD::mysql. Please regard this as an experimental feature. May not
           contain colons (:). Default: SQLite

       gitcvs.dbuser
           Database user. Only useful if setting dbdriver, since SQLite has no
           concept of database users. Supports variable substitution (see
           below).

       gitcvs.dbpass
           Database password. Only useful if setting dbdriver, since SQLite
           has no concept of database passwords.

       gitcvs.dbTableNamePrefix
           Database table name prefix. Supports variable substitution (see
           below). Any non-alphabetic characters will be replaced with
           underscores.

       All variables can also be set per access method, see above.

       Variable substitution
           In dbdriver and dbuser you can use the following variables:

           %G
               git directory name

           %g
               git directory name, where all characters except for
               alpha-numeric ones, ., and - are replaced with _ (this should
               make it easier to use the directory name in a filename if
               wanted)

           %m
               CVS module/git head name

           %a
               access method (one of "ext" or "pserver")

           %u
               Name of the user running git-cvsserver. If no name can be
               determined, the numeric uid is used.

ENVIRONMENT

       These variables obviate the need for command-line options in some
       circumstances, allowing easier restricted usage through git-shell.

       GIT_CVSSERVER_BASE_PATH takes the place of the argument to --base-path.

       GIT_CVSSERVER_ROOT specifies a single-directory whitelist. The
       repository must still be configured to allow access through
       git-cvsserver, as described above.

       When these environment variables are set, the corresponding
       command-line arguments may not be used.

ECLIPSE CVS CLIENT NOTES

       To get a checkout with the Eclipse CVS client:

        1. Select "Create a new project -> From CVS checkout"

        2. Create a new location. See the notes below for details on how to
           choose the right protocol.

        3. Browse the modules available. It will give you a list of the heads
           in the repository. You will not be able to browse the tree from
           there. Only the heads.

        4. Pick HEAD when it asks what branch/tag to check out. Untick the
           "launch commit wizard" to avoid committing the .project file.

       Protocol notes: If you are using anonymous access via pserver, just
       select that. Those using SSH access should choose the ext protocol, and
       configure ext access on the Preferences->Team->CVS->ExtConnection pane.
       Set CVS_SERVER to "git cvsserver". Note that password support is not
       good when using ext, you will definitely want to have SSH keys setup.

       Alternatively, you can just use the non-standard extssh protocol that
       Eclipse offer. In that case CVS_SERVER is ignored, and you will have to
       replace the cvs utility on the server with git-cvsserver or manipulate
       your .bashrc so that calling cvs effectively calls git-cvsserver.

CLIENTS KNOWN TO WORK

       o   CVS 1.12.9 on Debian

       o   CVS 1.11.17 on MacOSX (from Fink package)

       o   Eclipse 3.0, 3.1.2 on MacOSX (see Eclipse CVS Client Notes)

       o   TortoiseCVS

OPERATIONS SUPPORTED

       All the operations required for normal use are supported, including
       checkout, diff, status, update, log, add, remove, commit. Legacy
       monitoring operations are not supported (edit, watch and related).
       Exports and tagging (tags and branches) are not supported at this
       stage.

   CRLF Line Ending Conversions
       By default the server leaves the -k mode blank for all files, which
       causes the cvs client to treat them as a text files, subject to crlf
       conversion on some platforms.

       You can make the server use crlf attributes to set the -k modes for
       files by setting the gitcvs.usecrlfattr config variable. In this case,
       if crlf is explicitly unset (-crlf), then the server will set -kb mode
       for binary files. If crlf is set, then the -k mode will explicitly be
       left blank. See also gitattributes(5) for more information about the
       crlf attribute.

       Alternatively, if gitcvs.usecrlfattr config is not enabled or if the
       crlf attribute is unspecified for a filename, then the server uses the
       gitcvs.allbinary config for the default setting. If gitcvs.allbinary is
       set, then file not otherwise specified will default to -kb mode.
       Otherwise the -k mode is left blank. But if gitcvs.allbinary is set to
       "guess", then the correct -k mode will be guessed based on the contents
       of the file.

       For best consistency with cvs, it is probably best to override the
       defaults by setting gitcvs.usecrlfattr to true, and gitcvs.allbinary to
       "guess".

DEPENDENCIES

       git-cvsserver depends on DBD::SQLite.

COPYRIGHT AND AUTHORS

       This program is copyright The Open University UK - 2006.

       Authors:

       o   Martyn Smith <martyn@catalyst.net.nz[1]>

       o   Martin Langhoff <martin@catalyst.net.nz[2]>

       with ideas and patches from participants of the git-list
       <git@vger.kernel.org[3]>.

DOCUMENTATION

       Documentation by Martyn Smith <martyn@catalyst.net.nz[1]>, Martin
       Langhoff <martin@catalyst.net.nz[2]>, and Matthias Urlichs
       <smurf@smurf.noris.de[4]>.

GIT

       Part of the git(1) suite

NOTES

        1. martyn@catalyst.net.nz
           mailto:martyn@catalyst.net.nz

        2. martin@catalyst.net.nz
           mailto:martin@catalyst.net.nz

        3. git@vger.kernel.org
           mailto:git@vger.kernel.org

        4. smurf@smurf.noris.de
           mailto:smurf@smurf.noris.de