Man Linux: Main Page and Category List


       cnee record, replays or distributes X11 data


       cnee [options]


       The  program cnee can record and replay an X session. cnee also has the
       ability to distribute events to multiple displays.  cnee gets copies of
       X  protocol  data from the X server. These are either printed to file (
       record mode) or replayed  and  synchronised  (  replay  mode).   During
       record  and  replay  cnee  can distribute the record/replayed events to
       multiple displays.


       --err-file,- e <file>
              Redirect all Xnee verbose output file_name(default is stderr)

       --out-file,- o <file>
              Redirect all Xnee data to file_name(default is stdout)

       --display,- d <displayname>
              X server to contact (default is localhost)

       --all-clients,- ac
              Record all client's data (default)

              Record future client's data

       --data-to-record,- dtr <n>
              Intercept n numbers of data ( n<0 means forever)

       --time,- t <secs>
              Delay start of application for <secs> seconds. Can  be  used  to
              prevent recording of KeyRelease when starting Xnee from terminal

       --record,- rec
              Set recording mode

       --replay,- rep
              Set replaying mode

       --distribute,- di <LIST>
              Distribute recorded or replayed events to  LIST  where  LIST  is
              comma separated list of displays

       --future-clients,- fc
              Record future client's data (default)

       --plugin,- p <name
              Use the plugin name

       --verbose,- v
              Enable verbose printout

       --feedback-xosd,- fx
              Use xosd to feedback

       --feedback-stderr,- fs
              Use stderr to feedback

       --feedback-none,- fn
              Dont' use feedback

       --device-event-range,- devera <X_LIST>
              Set device event range to X_LIST

       --keep-autorepeat,- ka
              Keep autorepeat during record/replay

       --no-reparent-recording,- nrr
              Prevent explicit recording of ReparentNotify event


              Print only first and last of multiple successive MotionEvent

              Intercept all events

       --events-to-record,- etr <n>
              Intercept n numbers of events ( n<0 means forever)

       --seconds-to-record,- str <n>
              Intercept for n seconds ( n<0 means forever)

       --recorded-resolution  <res>
              Resolution to use when recording is set to res

       --human-printout,- hp
              Prints human readable

       --store-mouse-position,- smp
              Store the initial position of the mouse

       --request-range,- reqra <X_LIST>
              Set request range to X_LIST

       --reply-range,- repra <X_LIST>
              Set reply range to X_LIST

       --delivered-event-range,- devra <X_LIST>
              Set delivered event range to X_LIST

       --error-range,- erra <X_LIST>
              Set error range to X_LIST

       --extension-request-major-range,- erqmar <X_LIST>
              Set extension request major range to X_LIST

       --extension-request-minor-range,- erqmir <X_LIST>
              Set extension request minor range to X_LIST

       --extension-reply-major-range,- erpmar <X_LIST>
              Set extension reply major range to X_LIST

       --extension-reply-minor-range,- erpmir <X_LIST>
              Set extension reply minor range to X_LIST


       --speed-percent,- sp <speed>
              Set replaying speed percentage is set to speed

       --replay-resolution  <res>
              Resolution to use when replaying is set to res

              Use resolution adjustment

              Synchronise during replay

       --no-synchronise,- ns
              Don't use synchornisation during replay

       --recall-window-position,- rwp
              Recall the recorded window position to be used during replay

       --force-replay,- fp
              Keep replaying even if we are out of sync  .... dangerous

       --buffer-verbose,- bv
              Enable verbose printout of replay buffer

       --max-threshold,- mat <nr>
              Set the maximum threshold for sync to nr

       --min-threshold,- mit <nr>
              Set the minimum threshold for sync to tnr

       --tot-threshold,- tot <nr>
              Set the total threshold for sync to nr

       --replay-offset,- ro <x,y>
              Set the replay offset to (x,y)


       --file,- f <file_name>
              Read data from file file_name (default is stdin)

       --help,- h
              Print this message

              Prints all flags/options xnee accepts

       --project,- pr <file_name>
              Use project file file_name

       --version,- V
              Print product information

       --retype-file  <file>
              Types (faking user) the contents of the specified file

       --write-settings  <file>
              Writes settings to a resource file

       --print-settings,- ps
              Prints Xnee settings and waits (for <ENTER>)

       --print-event-names,- pens
              Prints X11 event number and name

       --print-event-name,- pen <ev>
              Prints X11 event number or name coresponding to ev

       --print-error-names,- perns
              Prints X11 error number and name

       --print-error-name,- pern <er>
              Prints X11 error number or name coresponding to er

       --print-reply-names,- pren
              Prints X11 reply number and name

       --print-request-names,- prns
              Prints X11 request number and name

       --print-request-name,- prn <req>
              Prints X11 request number or name  coresponding to req

              Record the keyboard

              Record mouse events

       --print-data-names,- pdn
              Prints X11 data number and name

              Prints Xnee help text in format as used when generating man page

              Prints Xnee help text in format as  used  when  generating  info

              Type  this  help  message  using  faked  keys (used to test xnee

       --demonstration,- demo
              Let Xnee take you on a demonstration ride

       --check-syntax,- cs
              Check syntax of the command line and/or project file (no exec)


              Name of a file (e.g /tmp/my_file.xns)

              Name of a display (e.g

       secs   Seconds (e.g 10)

       n      Integer number (e.g 100)

       LIST   Comma      separated      list       of       display       (e.g

       X_LIST Comma separated list of integers (e.g 12-23,35,45-56)


       cnee   --record   --events-to-record   1000   --mouse   --keyboard   -o
       /tmp/xnee.xns -e /tmp/xnee.log -v

              Records  1000  events (keyboard and mouse) to file /tmp/xnee.xns
              and dumps the verbose printout to /tmp/xnee.log

       cnee --replay -f /tmp/xnee.xns -v -e /tmp/xnee.log --no-sync

              Read data from /tmp/xnee.xns, replay it  and  verbose  print  to
              file /tmp/xnee.log

       For more examples, read the Xnee manual


       Henrik Sandklef.


       Report bugs in the program to


       Copyright  (C)  2001,  2002,  2003,  2004,  2005,  2006,  2007   Henrik
       Sandklef.  This  is   free   software;   see  the  source  for  copying
       conditions.  There  is  NO  warranty;not  even  for  MERCHANTABILITY or




       xnee man page, version 3.06


       This page describes cnee.   Mail  corrections  and  additions  to  bug-