NAME
aria2c - The ultra fast download utility
SYNOPSIS
aria2c [OPTIONS] [URI | MAGNET | TORRENT_FILE | METALINK_FILE]...
DESCRIPTION
aria2 is a utility for downloading files. The supported protocols are
HTTP(S), FTP, BitTorrent, and Metalink. aria2 can download a file from
multiple sources/protocols and tries to utilize your maximum download
bandwidth. It supports downloading a file from HTTP(S)/FTP and
BitTorrent at the same time, while the data downloaded from HTTP(S)/FTP
is uploaded to the BitTorrent swarm. Using Metalink’s chunk checksums,
aria2 automatically validates chunks of data while downloading a file
like BitTorrent.
OPTIONS
Basic Options
-d, --dir=DIR
The directory to store the downloaded file.
-i, --input-file=FILE
Downloads URIs found in FILE. You can specify multiple URIs for a
single entity: separate URIs on a single line using the TAB
character. Reads input from stdin when - is specified. The
additional out and dir options can be specified after each line of
URIs. This optional line must start with white space(s). See Input
File subsection for details.
-l, --log=LOG
The file name of the log file. If - is specified, log is written to
stdout.
-j, --max-concurrent-downloads=N
Set maximum number of parallel downloads for every static
(HTTP/FTP) URI, torrent and metalink. See also -s and -C option.
Default: 5
-V, --check-integrity[=true|false]
Check file integrity by validating piece hashes. This option has
effect only in BitTorrent and Metalink downloads with chunk
checksums. Use this option to re-download a damaged portion of a
file. Default: false
-c, --continue
Continue downloading a partially downloaded file. Use this option
to resume a download started by a web browser or another program
which downloads files sequentially from the beginning. Currently
this option is only applicable to HTTP(S)/FTP downloads.
-h, --help[=TAG|KEYWORD]
The help messages are classified with tags. A tag starts with "#".
For example, type "--help=#http" to get the usage for the options
tagged with "#http". If non-tag word is given, print the usage for
the options whose name includes that word. Available Values:
#basic, #advanced, #http, #https, #ftp, #metalink, #bittorrent,
#cookie, #hook, #file, #xml-rpc, #experimental, #all Default:
#basic
HTTP/FTP Options
--all-proxy=PROXY
Use this proxy server for all protocols. To erase previously
defined proxy, use "". You can override this setting and specify a
proxy server for a particular protocol using --http-proxy,
--https-proxy and --ftp-proxy options. This affects all URIs. The
format of PROXY is [http://][USER:PASSWORD@]HOST[:PORT]
Note
If user and password are embedded in proxy URI and they are also
specified by --{http,https,ftp,all}-proxy-{user,passwd} options,
those appeared later have precedence. For example, you have
http-proxy-user="myname", http-proxy-passwd="mypass" in aria2.conf
and you specify --http-proxy="http://proxy" in command-line, then
you get HTTP proxy "http://proxy" with user "myname" and password
"mypass". Another example: if you specified in command-line
--http-proxy="http://user:pass@proxy" --http-proxy-user="myname"
--http-proxy-passwd="mypass", then you will get HTTP proxy
"http://proxy" with user "myname" and password "mypass". One more
example: if you specified in command-line
--http-proxy-user="myname" --http-proxy-passwd="mypass"
--http-proxy="http://user:pass@proxy", then you get HTTP proxy
"http://proxy" with user "user" and password "pass".
--all-proxy-passwd=PASSWD
Set password for --all-proxy option.
--all-proxy-user=USER
Set user for --all-proxy option.
--connect-timeout=SEC
Set the connect timeout in seconds to establish connection to
HTTP/FTP/proxy server. After the connection is established, this
option makes no effect and --timeout option is used instead.
Default: 60
--dry-run[=true|false]
If true is given, aria2 just checks whether the remote file is
available and doesn’t download data. This option has effect on
HTTP/FTP download. BitTorrent downloads are canceled if true is
specified. Default: false
--lowest-speed-limit=SPEED
Close connection if download speed is lower than or equal to this
value(bytes per sec). 0 means aria2 does not have a lowest speed
limit. You can append K or M(1K = 1024, 1M = 1024K). This option
does not affect BitTorrent downloads. Default: 0
--max-file-not-found=NUM
If aria2 receives ‘file not found’ status from the remote HTTP/FTP
servers NUM times without getting a single byte, then force the
download to fail. Specify 0 to disable this option. This options is
effective only when using HTTP/FTP servers. Default: 0
-m, --max-tries=N
Set number of tries. 0 means unlimited. Default: 5
-n, --no-netrc
Disables netrc support. netrc support is enabled by default.
--no-proxy=DOMAINS
Specify comma separated hostnames, domains and network address with
or without CIDR block where proxy should not be used.
Note
For network address with CIDR block, only IPv4 address works.
Current implementation does not resolve hostname in URI to compare
network address specified in --no-proxy. So it is only effecive if
URI has numeric IP addresses.
-o, --out=FILE
The file name of the downloaded file. When -Z option is used, this
option is ignored.
Note
In Metalink or BitTorrent download you cannot specify file name.
The file name specified here is only used when the URIs fed to
aria2 are done by command line without -i, -Z option. For example:
aria2c -o myfile.zip "http://mirror1/file.zip"
"http://mirror2/file.zip"
--proxy-method=METHOD
Set the method to use in proxy request. METHOD is either get or
tunnel. HTTPS downloads always use tunnel regardless of this
option. Default: get
-R, --remote-time[=true|false]
Retrieve timestamp of the remote file from the remote HTTP/FTP
server and if it is available, apply it to the local file. Default:
false
*--reuse-uri[=true|false]
Reuse already used URIs if no unused URIs are left. Default: true
--server-stat-of=FILE
Specify the filename to which performance profile of the servers is
saved. You can load saved data using --server-stat-if option. See
Server Performance Profile subsection below for file format.
--server-stat-if=FILE
Specify the filename to load performance profile of the servers.
The loaded data will be used in some URI selector such as feedback.
See also --uri-selector option. See Server Performance Profile
subsection below for file format.
--server-stat-timeout=SEC
Specifies timeout in seconds to invalidate performance profile of
the servers since the last contact to them. Default: 86400
(24hours)
-s, --split=N
Download a file using N connections. If more than N URIs are given,
first N URIs are used and remaining URIs are used for backup. If
less than N URIs are given, those URIs are used more than once so
that N connections total are made simultaneously. Please see -j
option too. Please note that in Metalink download, this option has
no effect and use -C option instead. Default: 5
-t, --timeout=SEC
Set timeout in seconds. Default: 60
--uri-selector=SELECTOR
Specify URI selection algorithm. The possible values are inorder,
feedback and adaptive. If inorder is given, URI is tried in the
order appeared in the URI list. If feedback is given, aria2 uses
download speed observed in the previous downloads and choose
fastest server in the URI list. This also effectively skips dead
mirrors. The observed download speed is a part of performance
profile of servers mentioned in --server-stat-of and
--server-stat-if options. If adaptive is given, selects one of the
best mirrors for the first and reserved connections. For
supplementary ones, it returns mirrors which has not been tested
yet, and if each of them has already been tested, returns mirrors
which has to be tested again. Otherwise, it doesn’t select anymore
mirrors. Like feedback, it uses a performance profile of servers.
Default: feedback
HTTP Specific Options
--ca-certificate=FILE
Use the certificate authorities in FILE to verify the peers. The
certificate file must be in PEM format and can contain multiple CA
certificates. Use --check-certificate option to enable
verification.
--certificate=FILE
Use the client certificate in FILE. The certificate must be in PEM
format. You may use --private-key option to specify the private
key.
--check-certificate[=true|false]
Verify the peer using certificates specified in --ca-certificate
option. Default: true
--http-accept-gzip[=true|false]
Send "Accept: deflate, gzip" request header and inflate response if
remote server responds with "Content-Encoding: gzip" or
"Content-Encoding: deflate". Default: false
Note
Some server responds with "Content-Encoding: gzip" for files which
itself is gzipped file. aria2 inflates them anyway because of the
response header.
--http-auth-challenge[=true|false]
Send HTTP authorization header only when it is requested by the
server. If false is set, then authorization header is always sent
to the server. There is an exception: if username and password are
embedded in URI, authorization header is always sent to the server
regardless of this option. Default: false
--http-no-cache[=true|false]
Send Cache-Control: no-cache and Pragma: no-cache header to avoid
cached content. If false is given, these headers are not sent and
you can add Cache-Control header with a directive you like using
--header option. Default: true
--http-user=USER
Set HTTP user. This affects all URIs.
--http-passwd=PASSWD
Set HTTP password. This affects all URIs.
--http-proxy=PROXY
Use this proxy server for HTTP. To erase previously defined proxy,
use "". See also --all-proxy option. This affects all URIs. The
format of PROXY is [http://][USER:PASSWORD@]HOST[:PORT]
--http-proxy-passwd=PASSWD
Set password for --http-proxy option.
--http-proxy-user=USER:
Set user for *--http-proxy* option.
--https-proxy=PROXY
Use this proxy server for HTTPS. To erase previously defined proxy,
use "". See also --all-proxy option. This affects all URIs. The
format of PROXY is [http://][USER:PASSWORD@]HOST[:PORT]
--https-proxy-passwd=PASSWD
Set password for --https-proxy option.
--https-proxy-user=USER
Set user for --https-proxy option.
--private-key=FILE
Use the private key in FILE. The private key must be decrypted and
in PEM format. The behavior when encrypted one is given is
undefined. See also --certificate option.
--referer=REFERER
Set Referer. This affects all URIs.
--enable-http-keep-alive[=true|false]
Enable HTTP/1.1 persistent connection. Default: true
--enable-http-pipelining[=true|false]
Enable HTTP/1.1 pipelining. Default: false
--header=HEADER
Append HEADER to HTTP request header. You can use this option
repeatedly to specify more than one header: aria2c --header="X-A:
b78" --header="X-B: 9J1" "http://host/file"
--load-cookies=FILE
Load Cookies from FILE using the Firefox3 format (SQLite3) and the
Mozilla/Firefox(1.x/2.x)/Netscape format.
Note
If aria2 is built without libsqlite3, then it doesn’t support
Firefox3 cookie format.
--save-cookies=FILE
Save Cookies to FILE in Mozilla/Firefox(1.x/2.x)/ Netscape format.
If FILE already exists, it is overwritten. Session Cookies are also
saved and their expiry values are treated as 0. Possible Values:
/path/to/file
--use-head[=true|false]
Use HEAD method for the first request to the HTTP server. Default:
false
-U, --user-agent=USER_AGENT
Set user agent for HTTP(S) downloads. Default: aria2/$VERSION,
$VERSION is replaced by package version.
FTP Specific Options
--ftp-user=USER
Set FTP user. This affects all URIs. Default: anonymous
--ftp-passwd=PASSWD
Set FTP password. This affects all URIs. If user name is embedded
but password is missing in URI, aria2 tries to resolve password
using .netrc. If password is found in .netrc, then use it as
password. If not, use the password specified in this option.
Default: ARIA2USER@
-p, --ftp-pasv[=true|false]
Use the passive mode in FTP. If false is given, the active mode
will be used. Default: true
--ftp-proxy=PROXY
Use this proxy server for FTP. To erase previously defined proxy,
use "". See also --all-proxy option. This affects all URIs. The
format of PROXY is [http://][USER:PASSWORD@]HOST[:PORT]
--ftp-proxy-passwd=PASSWD
Set password for --ftp-proxy option.
--ftp-proxy-user=USER
Set user for --ftp-proxy option.
--ftp-type=TYPE
Set FTP transfer type. TYPE is either binary or ascii. Default:
binary
--ftp-reuse-connection[=true|false]
Reuse connection in FTP. Default: true
BitTorrent/Metalink Options
--select-file=INDEX...
Set file to download by specifying its index. You can find the file
index using the --show-files option. Multiple indexes can be
specified by using ",", for example: 3,6. You can also use "-" to
specify a range: 1-5. "," and "-" can be used together: 1-5,8,9.
When used with the -M option, index may vary depending on the query
(see --metalink-* options).
Note
In multi file torrent, the adjacent files specified by this option
may also be downloaded. This is by design, not a bug. A single
piece may include several files or part of files, and aria2 writes
the piece to the appropriate files.
-S, --show-files
Print file listing of .torrent or .metalink file and exit. In case
of .torrent file, additional information (infohash, piece length,
etc) is also printed.
BitTorrent Specific Options
--bt-enable-lpd[=true|false]
Enable Local Peer Discovery. If a private flag is set in a torrent,
aria2 doesn’t use this feature for that download even if true is
given. Default: false
--bt-external-ip=IPADDRESS
Specify the external IP address to report to a BitTorrent tracker.
Although this function is named "external", it can accept any kind
of IP addresses. IPADDRESS must be a numeric IP address.
--bt-hash-check-seed[=true|false]
If true is given, after hash check using --check-integrity option
and file is complete, continue to seed file. If you want to check
file and download it only when it is damaged or incomplete, set
this option to false. This option has effect only on BitTorrent
download. Default: true
--bt-lpd-interface=INTERFACE
Use given interface for Local Peer Discovery. If this option is not
specified, the default interface is chosen. You can specify
interface name and IP address. Possible Values: interface, IP
addres
--bt-max-open-files=NUM
Specify maximum number of files to open in each BitTorrent
download. Default: 100
--bt-max-peers=NUM
Specify the maximum number of peers per torrent. 0 means
unlimited. See also --bt-request-peer-speed-limit option. Default:
55
--bt-metadata-only[=true|false]
Download metadata only. The file(s) described in metadata will not
be downloaded. This option has effect only when BitTorrent Magnet
URI is used. See also --bt-save-metadata option. Default: false
--bt-min-crypto-level=plain|arc4
Set minimum level of encryption method. If several encryption
methods are provided by a peer, aria2 chooses the lowest one which
satisfies the given level. Default: plain
--bt-prioritize-piece=head[=SIZE],tail[=SIZE]
Try to download first and last pieces of each file first. This is
useful for previewing files. The argument can contain 2 keywords:
head and tail. To include both keywords, they must be separated by
comma. These keywords can take one parameter, SIZE. For example, if
head=SIZE is specified, pieces in the range of first SIZE bytes of
each file get higher priority. tail=SIZE means the range of last
SIZE bytes of each file. SIZE can include K or M(1K = 1024, 1M =
1024K). If SIZE is omitted, SIZE=1M is used.
--bt-require-crypto=true|false
If true is given, aria2 doesn’t accept and establish connection
with legacy BitTorrent handshake(\19BitTorrent protocol). Thus
aria2 always uses Obfuscation handshake. Default: false
--bt-request-peer-speed-limit=SPEED
If the whole download speed of every torrent is lower than SPEED,
aria2 temporarily increases the number of peers to try for more
download speed. Configuring this option with your preferred
download speed can increase your download speed in some cases. You
can append K or M(1K = 1024, 1M = 1024K). Default: 50K
--bt-save-metadata[=true|false]
Save metadata as .torrent file. This option has effect only when
BitTorrent Magnet URI is used. The filename is hex encoded info
hash with suffix .torrent. The directory to be saved is the same
directory where download file is saved. If the same file already
exists, metadata is not saved. See also --bt-metadata-only option.
Default: false
--bt-seed-unverified[=true|false]
Seed previously downloaded files without verifying piece hashes.
Default: false
--bt-stop-timeout=SEC
Stop BitTorrent download if download speed is 0 in consecutive SEC
seconds. If 0 is given, this feature is disabled. Default: 0
--bt-tracker-connect-timeout=SEC
Set the connect timeout in seconds to establish connection to
tracker. After the connection is established, this option makes no
effect and --bt-tracker-timeout option is used instead. Default: 60
--bt-tracker-interval=SEC
Set the interval in seconds between tracker requests. This
completely overrides interval value and aria2 just uses this value
and ignores the min interval and interval value in the response of
tracker. If 0 is set, aria2 determines interval based on the
response of tracker and the download progress. Default: 0
--bt-tracker-timeout=SEC
Set timeout in seconds. Default: 60
--dht-entry-point=HOST:PORT
Set host and port as an entry point to DHT network.
--dht-file-path=PATH
Change the DHT routing table file to PATH. Default:
$HOME/.aria2/dht.dat
--dht-listen-port=PORT...
Set UDP listening port for DHT. Multiple ports can be specified by
using ",", for example: 6881,6885. You can also use "-" to specify
a range: 6881-6999. "," and "-" can be used together. Default:
6881-6999
Note
Make sure that the specified ports are open for incoming UDP
traffic.
--dht-message-timeout=SEC
Set timeout in seconds. Default: 10
--enable-dht[=true|false]
Enable DHT functionality. If a private flag is set in a torrent,
aria2 doesn’t use DHT for that download even if true is given.
Default: true
--enable-peer-exchange[=true|false]
Enable Peer Exchange extension. If a private flag is set in a
torrent, this feature is disabled for that download even if true is
given. Default: true
--follow-torrent=true|false|mem
If true or mem is specified, when a file whose suffix is ".torrent"
or content type is "application/x-bittorrent" is downloaded, aria2
parses it as a torrent file and downloads files mentioned in it. If
mem is specified, a torrent file is not written to the disk, but is
just kept in memory. If false is specified, the action mentioned
above is not taken. Default: true
-O, --index-out=INDEX=PATH
Set file path for file with index=INDEX. You can find the file
index using the --show-files option. PATH is a relative path to the
path specified in --dir option. You can use this option multiple
times. Using this option, you can specify the output filenames of
BitTorrent downloads.
--listen-port=PORT...
Set TCP port number for BitTorrent downloads. Multiple ports can be
specified by using ",", for example: 6881,6885. You can also use
"-" to specify a range: 6881-6999. "," and "-" can be used
together: 6881-6889,6999. Default: 6881-6999
Note
Make sure that the specified ports are open for incoming TCP
traffic.
--max-overall-upload-limit=SPEED
Set max overall upload speed in bytes/sec. 0 means unrestricted.
You can append K or M(1K = 1024, 1M = 1024K). To limit the upload
speed per torrent, use --max-upload-limit option. Default: 0
-u, --max-upload-limit=SPEED
Set max upload speed per each torrent in bytes/sec. 0 means
unrestricted. You can append K or M(1K = 1024, 1M = 1024K). To
limit the overall upload speed, use --max-overall-upload-limit
option. Default: 0
--peer-id-prefix=PEER_ID_PREFIX
Specify the prefix of peer ID. The peer ID in BitTorrent is 20 byte
length. If more than 20 bytes are specified, only first 20 bytes
are used. If less than 20 bytes are specified, random byte data are
added to make its length 20 bytes. Default: aria2/$VERSION-,
$VERSION is replaced by package version.
--seed-ratio=RATIO
Specify share ratio. Seed completed torrents until share ratio
reaches RATIO. You are strongly encouraged to specify equals or
more than 1.0 here. Specify 0.0 if you intend to do seeding
regardless of share ratio. If --seed-time option is specified along
with this option, seeding ends when at least one of the conditions
is satisfied. Default: 1.0
--seed-time=MINUTES
Specify seeding time in minutes. Also see the --seed-ratio option.
Note
Specifying --seed-time=0 disables seeding after download completed.
-T, --torrent-file=TORRENT_FILE
The path to the .torrent file. You are not required to use this
option because you can specify .torrent files without -T.
Metalink Specific Options
--follow-metalink=true|false|mem
If true or mem is specified, when a file whose suffix is
".metalink" or content type of "application/metalink+xml" is
downloaded, aria2 parses it as a metalink file and downloads files
mentioned in it. If mem is specified, a metalink file is not
written to the disk, but is just kept in memory. If false is
specified, the action mentioned above is not taken. Default: true
-M, --metalink-file=METALINK_FILE
The file path to .metalink file. Reads input from stdin when - is
specified. You are not required to use this option because you can
specify .metalink files without -M.
-C, --metalink-servers=NUM_SERVERS
The number of servers to connect to simultaneously. Some Metalinks
regulate the number of servers to connect. aria2 strictly respects
them. This means that if Metalink defines the maxconnections
attribute lower than NUM_SERVERS, then aria2 uses the value of
maxconnections attribute instead of NUM_SERVERS. See also -s and -j
options. Default: 5
--metalink-language=LANGUAGE
The language of the file to download.
--metalink-location=LOCATION[,...]
The location of the preferred server. A comma-delimited list of
locations is acceptable, for example, jp,us.
--metalink-os=OS
The operating system of the file to download.
--metalink-version=VERSION
The version of the file to download.
--metalink-preferred-protocol=PROTO
Specify preferred protocol. The possible values are http, https,
ftp and none. Specify none to disable this feature. Default: none
--metalink-enable-unique-protocol=true|false
If true is given and several protocols are available for a mirror
in a metalink file, aria2 uses one of them. Use
--metalink-preferred-protocol option to specify the preference of
protocol. Default: true
XML-RPC Options
--enable-xml-rpc[=true|false]
Enable XML-RPC server. It is strongly recommended to set username
and password using --xml-rpc-user and --xml-rpc-passwd option. See
also --xml-rpc-listen-port option. Default: false
--xml-rpc-listen-all[=true|false]
Listen incoming XML-RPC requests on all network interfaces. If
false is given, listen only on local loopback interface. Default:
false
--xml-rpc-listen-port=PORT
Specify a port number for XML-RPC server to listen to. Possible
Values: 1024-65535 Default: 6800
--xml-rpc-max-request-size=SIZE
Set max size of XML-RPC request. If aria2 detects the request is
more than SIZE bytes, it drops connection. Default: 2M
--xml-rpc-passwd=PASSWD
Set XML-RPC password.
--xml-rpc-user=USER
Set XML-RPC user.
Advanced Options
--allow-overwrite=true|false
Restart download from scratch if the corresponding control file
doesn’t exist. See also --auto-file-renaming option. Default: false
--allow-piece-length-change=true|false
If false is given, aria2 aborts download when a piece length is
different from one in a control file. If true is given, you can
proceed but some download progress will be lost. Default: false
--always-resume[=true|false]
Always resume download. If true is given, aria2 always tries to
resume download and if resume is not possible, aborts download. If
false is given, when all given URIs do not support resume or aria2
encounters N URIs which does not support resume (N is the value
specified using --max-resume-failure-tries option), aria2 downloads
file from scratch. See --max-resume-failure-tries option. Default:
true
--async-dns[=true|false]
Enable asynchronous DNS. Default: true
--auto-file-renaming[=true|false]
Rename file name if the same file already exists. This option works
only in HTTP(S)/FTP download. The new file name has a dot and a
number(1..9999) appended. Default: true
--auto-save-interval=SEC
Save a control file(*.aria2) every SEC seconds. If 0 is given, a
control file is not saved during download. aria2 saves a control
file when it stops regardless of the value. The possible values are
between 0 to 600. Default: 60
--conf-path=PATH
Change the configuration file path to PATH. Default:
$HOME/.aria2/aria2.conf
-D, --daemon
Run as daemon. The current working directory will be changed to /
and standard input, standard output and standard error will be
redirected to /dev/null. Default: false
--disable-ipv6[=true|false]
Disable IPv6. This is useful if you have to use broken DNS and want
to avoid terribly slow AAAA record lookup. Default: false
--enable-direct-io[=true|false]
Enable directI/O, which lowers cpu usage while allocating/checking
files. Turn off if you encounter any error. Default: true
--event-poll=POLL
Specify the method for polling events. The possible values are
epoll, kqueue, port, poll and select. For each epoll, kqueue, port
and poll, it is available if system supports it. epoll is
available on recent Linux. kqueue is available on various *BSD
systems including Mac OS X. port is available on Open Solaris. The
default value may vary depending on the system you use.
--file-allocation=METHOD
Specify file allocation method. none doesn’t pre-allocate file
space. prealloc pre-allocates file space before download begins.
This may take some time depending on the size of the file. If you
are using newer file systems such as ext4 (with extents support),
btrfs or xfs, falloc is your best choice. It allocates large(few
GiB) files almost instantly. Don’t use falloc with legacy file
systems such as ext3 because it takes almost same time as prealloc
and it blocks aria2 entirely until allocation finishes. falloc may
not be available if your system doesn’t have posix_fallocate()
function. Possible Values: none, prealloc, falloc Default: prealloc
--human-readable[=true|false]
Print sizes and speed in human readable format (e.g., 1.2Ki, 3.4Mi)
in the console readout. Default: true
--interface=INTERFACE
Bind sockets to given interface. You can specify interface name, IP
address and hostname. Possible Values: interface, IP address,
hostname
Note
If an interface has multiple addresses, it is highly recommended to
specify IP address explicitly. See also --disable-ipv6. If your
system doesn’t have getifaddrs(), this option doesn’t accept
interface name.
--max-resume-failure-tries=N
When used with --always-resume=false, aria2 downloads file from
scratch when aria2 detects N number of URIs that does not support
resume. If N is 0, aria2 downloads file from scratch when all given
URIs do not support resume. See --always-resume option. Default: 0
--log-level=LEVEL
Set log level to output. LEVEL is either debug, info, notice, warn
or error. Default: debug
--on-download-complete=COMMAND
Set the command to be executed when download completes. See
--on-download-start option for the requirement of COMMAND. See also
--on-download-stop option. Possible Values: /path/to/command
--on-download-error=COMMAND
Set the command to be executed when download aborts due to error.
See --on-download-start option for the requirement of COMMAND. See
also --on-download-stop option. Possible Values: /path/to/command
--on-download-pause=COMMAND
Set the command to be executed when download is paused. See
--on-download-start option for the requirement of COMMAND. Possible
Values: /path/to/command
--on-download-start=COMMAND
Set the command to be executed when download starts up. COMMAND
must take just one argument and GID is passed to COMMAND as a first
argument. Possible Values: /path/to/command
--on-download-stop=COMMAND
Set the command to be executed when download stops. You can
override the command to be executed for particular download result
using --on-download-complete and --on-download-error. If they are
specified, command specified in this option is not executed. See
--on-download-start option for the requirement of COMMAND. Possible
Values: /path/to/command
--summary-interval=SEC
Set interval in seconds to output download progress summary.
Setting 0 suppresses the output. Default: 60
Note
In multi file torrent downloads, the files adjacent forward to the
specified files are also allocated if they share the same piece.
-Z, --force-sequential[=true|false]
Fetch URIs in the command-line sequentially and download each URI
in a separate session, like the usual command-line download
utilities. Default: false
--max-overall-download-limit=SPEED
Set max overall download speed in bytes/sec. 0 means unrestricted.
You can append K or M(1K = 1024, 1M = 1024K). To limit the download
speed per download, use --max-download-limit option. Default: 0
--max-download-limit=SPEED
Set max download speed per each download in bytes/sec. 0 means
unrestricted. You can append K or M(1K = 1024, 1M = 1024K). To
limit the overall download speed, use --max-overall-download-limit
option. Default: 0
--no-conf
Disable loading aria2.conf file.
--no-file-allocation-limit=SIZE
No file allocation is made for files whose size is smaller than
SIZE. You can append K or M(1K = 1024, 1M = 1024K). Default: 5M
-P, --parameterized-uri[=true|false]
Enable parameterized URI support. You can specify set of parts:
http://{sv1,sv2,sv3}/foo.iso. Also you can specify numeric
sequences with step counter: http://host/image[000-100:2].img. A
step counter can be omitted. If all URIs do not point to the same
file, such as the second example above, -Z option is required.
Default: false
-q, --quiet[=true|false]
Make aria2 quiet (no console output). Default: false
--realtime-chunk-checksum=true|false
Validate chunk of data by calculating checksum while downloading a
file if chunk checksums are provided. Default: true
--remove-control-file[=true|false]
Remove control file before download. Using with
--allow-overwrite=true, download always starts from scratch. This
will be useful for users behind proxy server which disables resume.
Note
For Metalink downloads, -C1 is recommended for proxy server which
disables resume, in order to avoid establishing unnecessary
connections.
--save-session=FILE
Save error/unfinished downloads to FILE on exit. You can pass this
output file to aria2c with -i option on restart. Please note that
downloads added by aria2.addTorrent and aria2.addMetalink XML-RPC
method are not saved.
--stop=SEC
Stop application after SEC seconds has passed. If 0 is given, this
feature is disabled. Default: 0
-v, --version
Print the version number, copyright and the configuration
information and exit.
Options That Take An Optional Argument
The options that have its argument surrounded by square brackets([])
take an optional argument. Usually omiting the argument is evaluated to
true. If you use short form of these options(such as -V) and give an
argument, then the option name and its argument should be
concatenated(e.g. -Vfalse). If any spaces are inserted between the
option name and the argument, the argument will be treated as URI and
usually this is not what you expect.
URI, MAGNET, TORRENT_FILE, METALINK_FILE
You can specify multiple URIs in command-line. Unless you specify -Z
option, all URIs must point to the same file or downloading will fail.
You can specify arbitrary number of BitTorrent Magnet URI. Please note
that they are always treated as a separate download. Both hex encoded
40 characters Info Hash and Base32 encoded 32 characters Info Hash are
supported. The multiple "tr" parameters are supported. Because
BitTorrent Magnet URI is likely to contain "&" character, it is highly
recommended to always quote URI with single(') or double(") quotation.
It is strongly recommended to enable DHT especially when "tr" parameter
is missing. See http://www.bittorrent.org/beps/bep_00.html for more
details about BitTorrent Magnet URI.
You can also specify arbitrary number of torrent files and Metalink
documents stored on a local drive. Please note that they are always
treated as a separate download. Both Metalink4 and Metalink version 3.0
are supported.
You can specify both torrent file with -T option and URIs. By doing
this, you can download a file from both torrent swarm and HTTP(S)/FTP
server at the same time, while the data from HTTP(S)/FTP are uploaded
to the torrent swarm. For single file torrents, URI can be a complete
URI pointing to the resource or if URI ends with /, name in torrent
file in torrent is added. For multi-file torrents, name and path are
added to form a URI for each file.
Note
Make sure that URI is quoted with single(') or double(") quotation
if it contains "&" or any characters that have special meaning in
shell.
Resuming Download
Usually, you can resume transfer by just issuing same command(aria2c
URI) if the previous transfer is made by aria2.
If the previous transfer is made by a browser or wget like sequential
download manager, then use -c option to continue the transfer(aria2c -c
URI).
EXIT STATUS
Because aria2 can handle multiple downloads at once, it encounters lots
of errors in a session. aria2 returns the following exit status based
on the last error encountered.
0
If all downloads are successful.
1
If an unknown error occurs.
2
If time out occurs.
3
If a resource is not found.
4
If aria2 sees the specfied number of "resource not found" error.
See --max-file-not-found option).
5
If a download aborts because download speed is too slow. See
--lowest-speed-limit option)
6
If network problem occurs.
7
If there are unfinished downloads. This error is only reported if
all finished downloads are successful and there are unfinished
downloads in a queue when aria2 exits by pressing Ctrl-C by an user
or sending TERM or INT signal.
8
If server does not support resume when resume is required to
complete download.
Note
An error occurred in a finished download will not be reported as
exit status.
ENVIRONMENT
aria2 recognizes the following environment variables.
http_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use in HTTP. Overrides http-proxy value in
configuration file. The command-line option --http-proxy overrides
this value.
https_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use in HTTPS. Overrides https-proxy value
in configuration file. The command-line option --https-proxy
overrides this value.
ftp_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use in FTP. Overrides ftp-proxy value in
configuration file. The command-line option --ftp-proxy overrides
this value.
all_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use if no protocol-specific proxy is
specified. Overrides all-proxy value in configuration file. The
command-line option --all-proxy overrides this value.
no_proxy [DOMAIN,...]
Specify comma-separated hostname, domains and network address with
or without CIDR block to which proxy should not be used. Overrides
no-proxy value in configuration file. The command-line option
--no-proxy overrides this value.
FILES
aria2.conf
By default, aria2 parses $HOME/.aria2/aria2.conf as a configuraiton
file. You can specify the path to configuration file using --conf-path
option. If you don’t want to use the configuraitonf file, use --no-conf
option.
The configuration file is a text file and has 1 option per each line.
In each line, you can specify name-value pair in the format:
NAME=VALUE, where name is the long command-line option name without
"--" prefix. You can use same syntax for the command-line option. The
lines beginning "#" are treated as comments.
# sample configuration file for aria2c
listen-port=60000
dht-listen-port=60000
seed-ratio=1.0
max-upload-limit=50K
ftp-pasv=true
dht.dat
By default, the routing table of DHT is saved to the path
$HOME/.aria2/dht.dat.
Control File
aria2 uses a control file to track the progress of a download. A
control file is placed in the same directory as the downloading file
and its filename is the filename of downloading file with ".aria2"
appended. For example, if you are downloading file.zip, then the
control file should be file.zip.aria2. (There is a exception for this
naming convention. If you are downloading a multi torrent, its control
file is the "top directory" name of the torrent with ".aria2" appended.
The "top directory" name is a value of "name" key in "info" directory
in a torrent file.)
Usually a control file is deleted once download completed. If aria2
decides that download cannot be resumed(for example, when downloading a
file from a HTTP server which doesn’t support resume), a control file
is not created.
Normally if you lose a control file, you cannot resume download. But if
you have a torrent or metalink with chunk checksums for the file, you
can resume the download without a control file by giving -V option to
aria2c in command-line.
Input File
The input file can contain a list of URIs for aria2 to download. You
can specify multiple URIs for a single entity: separate URIs on a
single line using the TAB character.
Each line is treated as if it is provided in command-line argument.
Therefore they are affected by -Z and -P options.
Lines starting with "#" are treated as comments and skipped.
Additionally, the following options can be specified after each line of
URIs. These optional lines must start with white space(s).
· dir
· check-integrity
· continue
· all-proxy
· all-proxy-user
· all-proxy-passwd
· connect-timeout
· dry-run
· lowest-speed-limit
· max-file-not-found
· max-tries
· no-proxy
· out
· proxy-method
· remote-time
· split
· timeout
· http-auth-challenge
· http-no-cache
· http-user
· http-passwd
· http-proxy
· http-proxy-user
· http-proxy-passwd
· https-proxy
· https-proxy-user
· https-proxy-passwd
· referer
· enable-http-keep-alive
· enable-http-pipelining
· header
· use-head
· user-agent
· ftp-user
· ftp-passwd
· ftp-pasv
· ftp-proxy
· ftp-proxy-user
· ftp-proxy-passwd
· ftp-type
· ftp-reuse-connection
· no-netrc
· reuse-uri
· select-file
· bt-enable-lpd
· bt-external-ip
· bt-hash-check-seed
· bt-max-open-files
· bt-max-peers
· bt-metadata-only
· bt-min-crypto-level
· bt-prioritize-piece
· bt-require-crypto
· bt-request-peer-speed-limit
· bt-save-metadata
· bt-seed-unverified
· bt-stop-timeout
· bt-tracker-interval
· bt-tracker-timeout
· bt-tracker-connect-timeout
· enable-peer-exchange
· follow-torrent
· index-out
· max-upload-limit
· seed-ratio
· seed-time
· follow-metalink
· metalink-servers
· metalink-language
· metalink-location
· metalink-os
· metalink-version
· metalink-preferred-protocol
· metalink-enable-unique-protocol
· allow-overwrite
· allow-piece-length-change
· async-dns
· auto-file-renaming
· file-allocation
· max-download-limit
· no-file-allocation-limit
· parameterized-uri
· realtime-chunk-checksum
· remove-control-file
· always-resume
· max-resume-failure-tries
· http-accept-gzip
These options have exactly same meaning of the ones in the command-line
options, but it just applies to the URIs it belongs to.
For example, the content of uri.txt is
http://server/file.iso http://mirror/file.iso
dir=/iso_images
out=file.img
http://foo/bar
If aria2 is executed with -i uri.txt -d /tmp options, then file.iso is
saved as /iso_images/file.img and it is downloaded from
http://server/file.iso and http://mirror/file.iso. The file bar is
downloaded from http://foo/bar and saved as /tmp/bar.
In some cases, out parameter has no effect. See note of --out option
for the restrictions.
Server Performance Profile
This section describes the format of server performance profile. The
file is plain text and each line has several NAME=VALUE pair, delimited
by comma. Currently following NAMEs are recognized:
host
Hostname of the server. Required.
protocol
Protocol for this profile, such as ftp, http. Required.
dl_speed
The average download speed observed in the previous download in
bytes per sec. Required.
sc_avg_speed
The average download speed observed in the previous download in
bytes per sec. This value is only updated if the download is done
in single connection environment and only used by
AdaptiveURISelector. Optional.
mc_avg_speed
The average download speed observed in the previous download in
bytes per sec. This value is only updated if the download is done
in multi connection environment and only used by
AdaptiveURISelector. Optional.
counter
How many times the server is used. Currently this value is only
used by AdaptiveURISelector. Optional.
last_updated
Last contact time in GMT with this server, specified in the seconds
since the Epoch(00:00:00 on January 1, 1970, UTC). Required.
status
ERROR is set when server cannot be reached or out-of-service or
timeout occurred. Otherwise, OK is set.
Those fields must exist in one line. The order of the fields is not
significant. You can put pairs other than the above; they are simply
ignored.
An example follows:
host=localhost, protocol=http, dl_speed=32000, last_updated=1222491640, status=OK
host=localhost, protocol=ftp, dl_speed=0, last_updated=1222491632, status=ERROR
XML-RPC INTERFACE
Terminology
GID
GID(or gid) is the key to manage each download. Each download has
an unique GID. Currently GID looks like an integer, but don’t treat
it as integer because it may be changed to another type in the
future release. Please note that GID is session local and not
persisted when aria2 exits.
Methods
aria2.addUri uris[, options[, position]]
This method adds new HTTP(S)/FTP/BitTorrent Magnet URI. uris is of type
array and its element is URI which is of type string. For BitTorrent
Magnet URI, uris must have only one element and it should be BitTorrent
Magnet URI. options is of type struct and its members are a pair of
option name and value. See Options below for more details. If position
is given as an integer starting from 0, the new download is inserted at
position in the waiting queue. If position is not given or position is
larger than the size of the queue, it is appended at the end of the
queue. This method returns GID of registered download.
aria2.addTorrent torrent[, uris[, options[, position]]]
This method adds BitTorrent download by uploading .torrent file. If you
want to add BitTorrent Magnet URI, use aria2.addUri method instead.
torrent is of type base64 which contains Base64-encoded .torrent file.
uris is of type array and its element is URI which is of type string.
uris is used for Web-seeding. For single file torrents, URI can be a
complete URI pointing to the resource or if URI ends with /, name in
torrent file is added. For multi-file torrents, name and path in
torrent are added to form a URI for each file. options is of type
struct and its members are a pair of option name and value. See Options
below for more details. If position is given as an integer starting
from 0, the new download is inserted at position in the waiting queue.
If position is not given or position is larger than the size of the
queue, it is appended at the end of the queue. This method returns GID
of registered download. Please note that the downloads added by this
method are not saved by --save-session.
aria2.addMetalink metalink[, options[, position]]
This method adds Metalink download by uploading .metalink file.
metalink is of type base64 which contains Base64-encoded .metalink
file. options is of type struct and its members are a pair of option
name and value. See Options below for more details. If position is
given as an integer starting from 0, the new download is inserted at
position in the waiting queue. If position is not given or position is
larger than the size of the queue, it is appended at the end of the
queue. This method returns array of GID of registered download. Please
note that the downloads added by this method are not saved by
--save-session.
aria2.remove gid
This method removes the download denoted by gid. gid is of type string.
If specified download is in progress, it is stopped at first. The
status of removed download becomes "removed". This method returns GID
of removed download.
aria2.forceRemove gid
This method removes the download denoted by gid. This method behaves
just like aria2.remove except that this method removes download without
any action which takes time such as contacting BitTorrent tracker.
aria2.pause gid
This method pauses the download denoted by gid. gid is of type string.
The status of paused download becomes "paused". If the download is
active, the download is placed on the first position of waiting queue.
As long as the status is "paused", the download is not started. To
change status to "waiting", use aria2.unpause method. This method
returns GID of paused download.
aria2.pauseAll
This method is equal to calling aria2.pause for every active/waiting
download. This methods returns "OK" for success.
aria2.forcePause pid
This method pauses the download denoted by gid. This method behaves
just like aria2.pause except that this method pauses download without
any action which takes time such as contacting BitTorrent tracker.
aria2.forcePauseAll
This method is equal to calling aria2.forcePause for every
active/waiting download. This methods returns "OK" for success.
aria2.unpause gid
This method changes the status of the download denoted by gid from
"paused" to "waiting". This makes the download eligible to restart. gid
is of type string. This method returns GID of unpaused download.
aria2.unpauseAll
This method is equal to calling aria2.unpause for every active/waiting
download. This methods returns "OK" for success.
aria2.tellStatus gid
This method returns download progress of the download denoted by gid.
gid is of type string. The response is of type struct and it contains
following keys. The value type is string.
gid
GID of this download.
status
"active" for currently downloading/seeding entry. "waiting" for the
entry in the queue; download is not started. "paused" for the
paused entry. "error" for the stopped download because of error.
"complete" for the stopped and completed download. "removed" for
the download removed by user.
totalLength
Total length of this download in bytes.
completedLength
Completed length of this download in bytes.
uploadLength
Uploaded length of this download in bytes.
bitfield
Hexadecimal representation of the download progress. The highest
bit corresponds to piece index 0. The set bits indicate the piece
is available and unset bits indicate the piece is missing. The
spare bits at the end are set to zero. When download has not
started yet, this key will not be included in the response.
downloadSpeed
Download speed of this download measured in bytes/sec.
uploadSpeed
Upload speed of this download measured in bytes/sec.
infoHash
InfoHash. BitTorrent only.
numSeeders
The number of seeders the client has connected to. BitTorrent only.
pieceLength
Piece length in bytes.
numPieces
The number of pieces.
connections
The number of peers/servers the client has connected to.
errorCode
The last error code occurred in this download. The value is of type
string. The error codes are defined in EXIT STATUS section. This
value is only available for stopped/completed downloads.
followedBy
List of GIDs which are generated by the consequence of this
download. For example, when aria2 downloaded Metalink file, it
generates downloads described in it(see --follow-metalink option).
This value is useful to track these auto generated downloads. If
there is no such downloads, this key will not be included in the
response.
belongsTo
GID of a parent download. Some downloads are a part of another
download. For example, if a file in Metalink has BitTorrent
resource, the download of .torrent is a part of that file. If this
download has no parent, this key will not be included in the
response.
dir
Directory to save files. This key is not available for stopped
downloads.
files
Returns the list of files. The element of list is the same struct
used in aria2.getFiles method.
bittorrent
Struct which contains information retrieved from .torrent file.
BitTorrent only. It contains following keys.
announceList
List of lists of announce URI. If .torrent file contains
announce and no announce-list, announce is converted to
announce-list format.
comment
The comment for the torrent. comment.utf-8 is used if
available.
creationDate
The creation time of the torrent. The value is an integer since
the Epoch, measured in seconds.
mode
File mode of the torrent. The value is either single or multi.
info
Struct which contains data from Info dictionary. It contains
following keys.
name
name in info dictionary. name.utf-8 is used if available.
aria2.getUris gid
This method returns URIs used in the download denoted by gid. gid is of
type string. The response is of type array and its element is of type
struct and it contains following keys. The value type is string.
uri
URI
status
used if the URI is already used. waiting if the URI is waiting in
the queue.
aria2.getFiles gid
This method returns file list of the download denoted by gid. gid is of
type string. The response is of type array and its element is of type
struct and it contains following keys. The value type is string.
index
Index of file. Starting with 1. This is the same order with the
files in multi-file torrent.
path
File path.
length
File size in bytes.
selected
"true" if this file is selected by --select-file option. If
--select-file is not specified or this is single torrent or no
torrent download, this value is always "true". Otherwise "false".
uris
Returns the list of URI for this file. The element of list is the
same struct used in aria2.getUris method.
aria2.getPeers gid
This method returns peer list of the download denoted by gid. gid is of
type string. This method is for BitTorrent only. The response is of
type array and its element is of type struct and it contains following
keys. The value type is string.
peerId
Percent-encoded peer ID.
ip
IP address of the peer.
port
Port number of the peer.
bitfield
Hexadecimal representation of the download progress of the peer.
The highest bit corresponds to piece index 0. The set bits indicate
the piece is available and unset bits indicate the piece is
missing. The spare bits at the end are set to zero.
amChoking
"true" if this client is choking the peer. Otherwise "false".
peerChoking
"true" if the peer is choking this client. Otherwise "false".
downloadSpeed
Download speed (byte/sec) that this client obtains from the peer.
uploadSpeed
Upload speed(byte/sec) that this client uploads to the peer.
seeder
"true" is this client is a seeder. Otherwise "false".
aria2.getServers gid
This method returns currently connected HTTP(S)/FTP servers of the
download denoted by gid. gid is of type string. The response is of type
array and its element is of type struct and it contains following keys.
The value type is string.
index
Index of file. Starting with 1. This is the same order with the
files in multi-file torrent.
servers
The list of struct which contains following keys.
uri
URI originally added.
currentUri
This is the URI currently used for downloading. If redirection
is involved, currentUri and uri may differ.
downloadSpeed
Download speed (byte/sec)
aria2.tellActive
This method returns the list of active downloads. The response is of
type array and its element is the same struct returned by
aria2.tellStatus method.
aria2.tellWaiting offset, num
This method returns the list of waiting download, including paused
downloads. offset is of type integer and specifies the offset from the
download waiting at the front. num is of type integer and specifies the
number of downloads to be returned.
If offset is a positive integer, this method returns downloads in the
range of [offset, offset+num).
offset can be a negative integer. offset == -1 points last download in
the waiting queue and offset == -2 points the download before the last
download, and so on. The downloads in the response are in reversed
order.
For example, imagine that three downloads "A","B" and "C" are waiting
in this order. aria2.tellWaiting(0, 1) returns ["A"].
aria2.tellWaiting(1, 2) returns ["B", "C"]. aria2.tellWaiting(-1, 2)
returns ["C", "B"].
The response is of type array and its element is the same struct
returned by aria2.tellStatus method.
aria2.tellStopped offset, num
This method returns the list of stopped download. offset is of type
integer and specifies the offset from the oldest download. num is of
type integer and specifies the number of downloads to be returned.
offset and num have the same semantics as aria2.tellWaiting method.
The response is of type array and its element is the same struct
returned by aria2.tellStatus method.
aria2.changePosition gid, pos, how
This method changes the position of the download denoted by gid. pos is
of type integer. how is of type string. If how is "POS_SET", it moves
the download to a position relative to the beginning of the queue. If
how is "POS_CUR", it moves the download to a position relative to the
current position. If how is "POS_END", it moves the download to a
position relative to the end of the queue. If the destination position
is less than 0 or beyond the end of the queue, it moves the download to
the beginning or the end of the queue respectively. The response is of
type integer and it is the destination position.
For example, if GID#1 is placed in position 3, aria2.changePosition(1,
-1, POS_CUR) will change its position to 2. Additional
aria2.changePosition(1, 0, POS_SET) will change its position to 0(the
beginning of the queue).
aria2.changeUri gid, fileIndex, delUris, addUris[, position]
This method removes URIs in delUris from and appends URIs in addUris to
download denoted by gid. delUris and addUris are list of string. A
download can contain multiple files and URIs are attached to each file.
fileIndex is used to select which file to remove/attach given URIs.
fileIndex is 1-based. position is used to specify where URIs are
inserted in the existing waiting URI list. position is 0-based. When
position is omitted, URIs are appended to the back of the list. This
method first execute removal and then addition. position is the
position after URIs are removed, not the position when this method is
called. When removing URI, if same URIs exist in download, only one of
them is removed for each URI in delUris. In other words, there are
three URIs "http://example.org/aria2" and you want remove them all, you
have to specify (at least) 3 "http://example.org/aria2" in delUris.
This method returns a list which contains 2 integers. The first integer
is the number of URIs deleted. The second integer is the number of URIs
added.
aria2.getOption gid
This method returns options of the download denoted by gid. The
response is of type struct. Its key is the name of option. The value
type is string.
aria2.changeOption gid, options
This method changes options of the download denoted by gid dynamically.
gid is of type string. options is of type struct and the available
options are: bt-max-peers, bt-request-peer-speed-limit,
max-download-limit and max-upload-limit. This method returns "OK" for
success.
aria2.getGlobalOption
This method returns global options. The response is of type struct. Its
key is the name of option. The value type is string. Because global
options are used as a template for the options of newly added download,
the response contains keys returned by aria2.getOption method.
aria2.changeGlobalOption options
This method changes global options dynamically. options is of type
struct and the available options are max-concurrent-downloads,
max-overall-download-limit and max-overall-upload-limit. This method
returns "OK" for success.
aria2.purgeDownloadResult
This method purges completed/error/removed downloads to free memory.
This method returns "OK".
aria2.getVersion
This method returns version of the program and the list of enabled
features. The response is of type struct and contains following keys.
version
Version number of the program in string.
enabledFeatures
List of enabled features. Each feature name is of type string.
aria2.getSessionInfo
This method returns session information. The response is of type struct
and contains following key.
sessionId
Session ID, which is generated each time when aria2 is invoked.
aria2.shutdown
This method shutdowns aria2. This method returns "OK".
aria2.forceShutdown
This method shutdowns aria2. This method behaves like aria2.shutdown
except that any actions which takes time such as contacting BitTorrent
tracker are skipped. This method returns "OK".
system.multicall methods
This methods encapsulates multiple method calls in a single request.
methods is of type array and its element is struct. The struct contains
two keys: "methodName" and "params". "methodName" is the method name to
call and "params" is array containing parameters to the method. This
method returns array of responses. The element of array will either be
a one-item array containing the return value of each method call or
struct of fault element if an encapsulated method call fails.
Error Handling
In case of error, aria2 returns faultCode=1 and the error message in
faultString.
Options
Same options for -i list are available. See Input File subsection for
complete list of options.
In the option struct, name element is option name(without preceding
"--") and value element is argument as string.
<struct>
<member>
<name>split</name>
<value><string>1</string></value>
</member>
<member>
<name>http-proxy</name>
<value><string>http://proxy/</string></value>
</member>
</struct>
header and index-out option are allowed multiple times in command-line.
Since name should be unique in struct(many XML-RPC library
implementation uses hash or dict for struct), single string is not
enough. To overcome this situation, they can take array as value as
well as string.
<struct>
<member>
<name>header</name>
<value>
<array>
<data>
<value><string>Accept-Language: ja</string></value>
<value><string>Accept-Charset: utf-8</string></value>
</data>
</array>
</value>
</member>
</struct>
Sample XML-RPC Client Code
The following Ruby script adds http://localhost/aria2.tar.bz2 to aria2c
operated on localhost with option --dir=/downloads and prints its
reponse.
#!/usr/bin/env ruby
require 'xmlrpc/client'
require 'pp'
client=XMLRPC::Client.new2("http://localhost:6800/rpc")
options={ "dir" => "/downloads" }
result=client.call("aria2.addUri", [ "http://localhost/aria2.tar.bz2" ], options)
pp result
If you are a Python lover, you can use xmlrpclib(for Python3.x, use
xmlrpc.client instead) to interact with aria2.
import xmlrpclib
from pprint import pprint
s = xmlrpclib.ServerProxy("http://localhost:6800/rpc")
r = s.aria2.addUri(["http://localhost/aria2.tar.bz2"], {"dir":"/downloads"})
pprint(r)
EXAMPLE
HTTP/FTP Segmented Download
Download a file
aria2c "http://host/file.zip"
Note
aria2 uses 5 connections to download 1 file by default.
Download a file using 1 connection
aria2c -s1 "http://host/file.zip"
Note
aria2 uses 5 connections to download 1 file by default. -s1
limits the number of connections to just 1.
Note
To stop a download, press Ctrl-C. You can resume the transfer
by running aria2c with the same argument in the same directory.
You can change URIs as long as they are pointing to the same
file.
Download a file from 2 different HTTP servers
aria2c "http://host/file.zip" "http://mirror/file.zip"
Download a file from HTTP and FTP servers
aria2c "http://host1/file.zip" "ftp://host2/file.zip"
Download files listed in a text file concurrently
aria2c -ifiles.txt -j2
Note
-j option specifies the number of parallel downloads.
Using proxy
For HTTP:
aria2c --http-proxy="http://proxy:8080" "http://host/file"
aria2c --http-proxy="http://proxy:8080" --no-proxy="localhost,127.0.0.1,192.168.0.0/16" "http://host/file"
For FTP:
aria2c --ftp-proxy="http://proxy:8080" "ftp://host/file"
Note
See --http-proxy, --https-proxy, --ftp-proxy, --all-proxy and
--no-proxy for details. You can specify proxy in the
environment variables. See ENVIRONMENT section.
Proxy with authorization
aria2c --http-proxy="http://username:password@proxy:8080" "http://host/file"
aria2c --http-proxy="http://proxy:8080" --http-proxy-user="username" --http-proxy-passwd="password" "http://host/file"
Metalink Download
Download files with remote Metalink
aria2c --follow-metalink=mem "http://host/file.metalink"
Download using a local metalink file
aria2c -p --lowest-speed-limit=4000 file.metalink
Note
To stop a download, press Ctrl-C. You can resume the transfer
by running aria2c with the same argument in the same directory.
Download several local metalink files
aria2c -j2 file1.metalink file2.metalink
Download only selected files using index
aria2c --select-file=1-4,8 file.metalink
Note
The index is printed to the console using -S option.
Download a file using a local .metalink file with user preference
aria2c --metalink-location=jp,us --metalink-version=1.1 --metalink-language=en-US file.metalink
BitTorrent Download
Download files from remote BitTorrent file
aria2c --follow-torrent=mem "http://host/file.torrent"
Download using a local torrent file
aria2c --max-upload-limit=40K file.torrent
Note
--max-upload-limit specifies the max of upload rate.
Note
To stop a download, press Ctrl-C. You can resume the transfer
by running aria2c with the same argument in the same directory.
Download using BitTorrent Magnet URI
aria2c "magnet:?xt=urn:btih:248D0A1CD08284299DE78D5C1ED359BB46717D8C&dn=aria2"
Note
Don’t forget to quote BitTorrent Magnet URI which includes "&"
character with single(') or double(") quotation.
Download 2 torrents
aria2c -j2 file1.torrent file2.torrent
Download a file using torrent and HTTP/FTP server
aria2c -Ttest.torrent "http://host1/file" "ftp://host2/file"
Note
Downloading multi file torrent with HTTP/FTP is not supported.
Download only selected files using index(usually called "selectable
download")
aria2c --select-file=1-4,8 file.torrent
Note
The index is printed to the console using -S option.
Specify output filename
To specify output filename for BitTorrent downloads, you need to
know the index of file in torrent file using -S option. For
example, the output looks like this:
idx|path/length
===+======================
1|dist/base-2.6.18.iso
|99.9MiB
---+----------------------
2|dist/driver-2.6.18.iso
|169.0MiB
---+----------------------
To save dist/base-2.6.18.iso in /tmp/mydir/base.iso and
dist/driver-2.6.18.iso in /tmp/dir/driver.iso, use the following
command:
aria2c --dir=/tmp --index-out=1=mydir/base.iso --index-out=2=dir/driver.iso file.torrent
Change the listening port for incoming peer
aria2c --listen-port=7000-7001,8000 file.torrent
Note
Since aria2 doesn’t configure firewall or router for port
forwarding, it’s up to you to do it manually.
Specify the condition to stop program after torrent download finished
aria2c --seed-time=120 --seed-ratio=1.0 file.torrent
Note
In the above example, the program exits when the 120 minutes
has elapsed since download completed or seed ratio reaches 1.0.
Throttle upload speed
aria2c --max-upload-limit=100K file.torrent
Enable DHT
aria2c --enable-dht --dht-listen-port=6881 file.torrent
Note
DHT uses udp port. Since aria2 doesn’t configure firewall or
router for port forwarding, it’s up to you to do it manually.
More advanced HTTP features
Load cookies
aria2c --load-cookies=cookies.txt "http://host/file.zip"
Note
You can use Firefox/Mozilla’s cookie file without modification.
Resume download started by web browsers or another programs
aria2c -c -s2 "http://host/partiallydownloadedfile.zip"
Client certificate authorization for SSL/TLS
aria2c --certificate=/path/to/mycert.pem --private-key=/path/to/mykey.pem https://host/file
Note
The file specified in --private-key must be decrypted. The
behavior when encrypted one is given is undefined.
Verify peer in SSL/TLS using given CA certificates
aria2c --ca-certificate=/path/to/ca-certificates.crt --check-certificate https://host/file
And more advanced features
Throttle download speed
aria2c --max-download-limit=100K file.metalink
Repair a damaged download
aria2c -V file.metalink
Note
This option is only available used with BitTorrent or metalink
with chunk checksums.
Drop connection if download speed is lower than specified value
aria2c --lowest-speed-limit=10K file.metalink
Parameterized URI support
You can specify set of parts:
aria2c -P "http://{host1,host2,host3}/file.iso"
You can specify numeric sequence:
aria2c -Z -P "http://host/image[000-100].png"
Note
-Z option is required if the all URIs don’t point to the same
file, such as the above example.
You can specify step counter:
aria2c -Z -P "http://host/image[A-Z:2].png"
Parallel downloads of arbitrary number of URI,metalink,torrent
aria2c -j3 -Z "http://host/file1" file2.torrent file3.metalink
BitTorrent Encryption
Encrypt whole payload using ARC4:
aria2c --bt-min-crypto-level=arc4 --bt-require-crypto=true file.torrent
SEE ALSO
Project Web Site: http://aria2.sourceforge.net/
aria2 Wiki: http://sourceforge.net/apps/trac/aria2/wiki
Metalink Homepage: http://www.metalinker.org/
The Metalink Download Description Format:
http://www.rfc-editor.org/rfc/rfc5854.txt
COPYRIGHT
Copyright © 2006, 2010 Tatsuhiro Tsujikawa
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
In addition, as a special exception, the copyright holders give
permission to link the code of portions of this program with the
OpenSSL library under certain conditions as described in each
individual source file, and distribute linked combinations including
the two. You must obey the GNU General Public License in all respects
for all of the code used other than OpenSSL. If you modify file(s) with
this exception, you may extend this exception to your version of the
file(s), but you are not obligated to do so. If you do not wish to do
so, delete this exception statement from your version. If you delete
this exception statement from all source files in the program, then
also delete it here.