Man Linux: Main Page and Category List


       aecho - send AppleTalk Echo Protocol packets to network hosts


       aecho [ -c count ] ( address | nbpname )


       aecho repeatedly sends an Apple Echo Protocol (AEP) packet to the host
       specified by the given AppleTalk address or nbpname and reports whether
       a reply was received. Requests are sent at the rate of one per second.

       address is parsed by atalk_aton(3).  nbpname is parsed by nbp_name(3).
       The nbp type defaults to ‘Workstation´.

       When aecho is terminated, it reports the number of packets sent, the
       number of responses received, and the percentage of packets lost. If
       any responses were received, the minimum, average, and maximum round
       trip times are reported.


       Check to see if a particular host is up and responding to AEP packets:

           example% aecho bloodsport
           11 bytes from 8195.13: aep_seq=0. time=10. ms
           11 bytes from 8195.13: aep_seq=1. time=10. ms
           11 bytes from 8195.13: aep_seq=2. time=10. ms
           11 bytes from 8195.13: aep_seq=3. time=10. ms
           11 bytes from 8195.13: aep_seq=4. time=10. ms
           11 bytes from 8195.13: aep_seq=5. time=9. ms
           ----8195.13 AEP Statistics----
           6 packets sent, 6 packets received, 0% packet loss
           round-trip (ms)  min/avg/max = 9/9/10


       -c count
           Stop after count packets.


       ping(1), atalk_aton(3), nbp_name(3), aep(4), atalkd(8).